Weaver Wr2Sg 2" Swivel Mounting Ring, Grey - 1007S-G - 957-Wr2Sgf1

The Weaver mounting rings come in two models, standard or swivel. Available in three sizes 1", 1-1/2" and 2" stainless steel ring size.

Weaver Wr2G 2" Standard Mounting Ring, Grey - 1007-G - 957-Wr2Gf1

The Weaver mounting rings come in two models, standard or swivel. Available in three sizes 1", 1-1/2" and 2" stainless steel ring size.

Weaver Wr2 2" Standard Mounting Ring, Black - 1007 - 957-Wr2F1

The Weaver mounting rings come in two models, standard or swivel. Available in three sizes 1", 1-1/2" and 2" stainless steel ring size.

Weaver Wr1G 1" Standard Mounting Ring, Grey - 1004-G - 957-Wr1Gf1

The Weaver mounting rings come in two models, standard or swivel. Available in three sizes 1", 1-1/2" and 2" stainless steel ring size.

Weaver Wr112Sg 1-1/2" Swivel Mounting Ring, Grey - 1006S-G - 957-Wr112Sgf1

The Weaver mounting rings come in two models, standard or swivel. Available in three sizes 1", 1-1/2" and 2" stainless steel ring size.

Weaver Wr112S 1-1/2" Swivel Mounting Ring, Black - 1006S - 957-Wr112Sf1

The Weaver mounting rings come in two models, standard or swivel. Available in three sizes 1", 1-1/2" and 2" stainless steel ring size.

Weaver Wr112G 1-1/2" Standard Mounting Ring, Grey - 1006-G - 957-Wr112Gf1

The Weaver mounting rings come in two models, standard or swivel. Available in three sizes 1", 1-1/2" and 2" stainless steel ring size.

Weaver Wr112 1-1/2" Standard Mounting Ring, Black - 1006 - 957-Wr112F1

The Weaver mounting rings come in two models, standard or swivel. Available in three sizes 1", 1-1/2" and 2" stainless steel ring size.

Weaver Weaver Winch W/Quick Removal Kit - Winch/Qk - 957-Winchremf1

Rated for 400lbs on a 1:1 ratio. The Weaver Arc combined with the Weaver Leaver allows boater to leave their outboard in place while they raise their dinghy to the upright position. The Weaver Winch is designed to lift a total "in the water" weight of 400 lbs. The Weaver Winch is made with rugged stainless steel and marine grade brass. It features a custom braking system that allows a dinghy to be safely lowered to the water.

Weaver Weaver Winch - Winch - 957-Winchf1

Rated for 400lbs on a 1:1 ratio. The Weaver Arc combined with the Weaver Leaver allows boater to leave their outboard in place while they raise their dinghy to the upright position. The Weaver Winch is designed to lift a total "in the water" weight of 400 lbs. The Weaver Winch is made with rugged stainless steel and marine grade brass. It features a custom braking system that allows a dinghy to be safely lowered to the water.

Weaver Wb8 Walker Bay Davit Systems For 8' Rigid Walker Bay - Wb8 - 957-Wb8F1

Used to mount all 8' Walker Bay rigid dinghies to the swim platform, the adjustment in this two Arc System will accommodate dinghies with large, small or no tubes. All stainless steel construction. Kit includes front and back arcs for Walker Bay and swim platform mounted snap david heads.

Weaver Um001G Ultramount, W/Grey Pads - Um001-Grey - 957-Um001Gf1

High grade aluminum construction. Mounts with 3 Weaver mounting pads (included) which must be attached with the proper inflatable boat glue (sold separately). Excellent platform for fishing downriggers, outboard remote controls and other accessories.

Weaver Um001 Ultramount, W/Black Pads - Um001 - 957-Um001F1

High grade aluminum construction. Mounts with 3 Weaver mounting pads (included) which must be attached with the proper inflatable boat glue (sold separately). Excellent platform for fishing downriggers, outboard remote controls and other accessories.

Weaver Toggle Bbs™ Toggler Snaptoggle® Anchor, 4/Pk - Toggle - 957-Togglef1

A new way for installing Weaver Davits and Weaver Chock Systems on integrated swim platforms or difficult areas to get into.

Weaver Tmh Yacht Side Hooks, Transom Mt. - Tmh - 957-Tmhf1

Hooks that go on the yacht side for Weaver Hard-Shelled Davit Systems.

Weaver Ssh Yacht Side Hooks, Swim Grid Mt. - Ssh - 957-Sshf1

Hooks that go on the yacht side for Weaver Hard-Shelled Davit Systems.

Weaver Snap-Ups Davits - Snap Ups - 957-Snapupsf1

These have a 12" drop for hooking up a dinghy from a high swim platform and lifting it out of the water to a 3" drop below the swim platform so the dinghy doesn't fill up with water.

Weaver Sd8 Davit Set For Boston Whaler - Sd8 - 957-Sd8F1

This special heavy duty davit is designed for 9'-11' Boston Whaler dinghies. Sold as a set.

Weaver Sd7 Heavy Duty Davit System - Sd7 - 957-Sd7F1

For 10'-12' dinghies. They feature high strength davit heads and oversize transom mounts to handle the extra weight of larger dinghies.

Weaver Sd6 Extended Swim Grid Davit Sets With 6" Risers - Sd6 - 957-Sd6F1

Features risers which come with standard davit heads. Perfect for dinghies with considerable freeboard. Complete with all parts necessary for an easy installation.

Weaver Sd4 Extended Swim Grid Davit Sets With 4" Risers - Sd4 - 957-Sd4F1

Features risers which come with standard davit heads. Perfect for dinghies with considerable freeboard. Complete with all parts necessary for an easy installation.

Weaver Sd2 Transom Davits Set For Hard Shelled Dinghies - Sd2 - 957-Sd2F1

The original Weaver snap davits for hard shelled boats. 100% U.S. Stainless Steel. Easy to install - all hardware included. Pull release and snap hook-up prevents pinched fingers. Will fold away inside dinghy when not in use. Designed to fit most fiberglass dinghies from 7'-9'.

Weaver Sd1 Swim Platform Davits Set For Hard Shelled Dinghies - Sd1 - 957-Sd1F1

The original Weaver snap davits for hard shelled boats. 100% U.S. Stainless Steel. Easy to install - all hardware included. Pull release and snap hook-up prevents pinched fingers. Will fold away inside dinghy when not in use. Designed to fit most fiberglass dinghies from 7'-9'.

Weaver Rsh120 Replacement Yolk - Rsh120 - 957-Rsh120F1

Fits into RP101/RP101G pads.

Weaver Rs110Rise4 Rise Up Davit Head - Raise4 - 957-Rs110Rise4F1

For RBD100. Sold by the each.

Weaver Rs110Rise3 Rise Up Davit Head - Raise3 - 957-Rs110Rise3F1

For RBD100. Sold by the each.

Weaver Rs110Rise2 Rise Up Davit Head - Raise2 - 957-Rs110Rise2F1

For RBD100. Sold by the each.

Weaver Rs110Ext4 Extended Davit Head - Ext4 - 957-Rs110Ext4F1

For RBD100. Sold by the each.

Weaver Rs110Ext2 Extended Davit Head - Ext2 - 957-Rs110Ext2F1

For RBD100. Sold by the each.

Weaver Rs1104X6 Offset Davit Head - Offset4X6 - 957-Rs1104X6F1

For RBD100. Sold by the each.

Weaver Rs1104X4Up Offset Davit Head - Upset4X4 - 957-Rs1104X4Upf1

For RBD100. Sold by the each.

Weaver Rs1104X4 Offset Davit Head - Offset4X4 - 957-Rs1104X4F1

For RBD100. Sold by the each.

Weaver Rs1104X2 Offset Davit Head - Offset4X2 - 957-Rs1104X2F1

For RBD100. Sold by the each.

Weaver Rs1102X6 Offset Davit Head - Offset2X6 - 957-Rs1102X6F1

For RBD100. Sold by the each.

Weaver Rs1102X4 Offset Davit Head - Offset2X4 - 957-Rs1102X4F1

For RBD100. Sold by the each.

Weaver Rs1102X2 Offset Davit Head - Offset2X2 - 957-Rs1102X2F1

For RBD100. Sold by the each.

Weaver Rs110 Standard Davit Head - Rs110 - 957-Rs110F1

For RBD100. Sold by the each.

Weaver Rp304G Stand-Off Pad, Grey With Swivel - Rp304 - 957-Rp304Gf1

This hypalon, molded rubber pad is used to clip stand-offs to inflatable boats.

Weaver Rp301G Stand-Off Pad, Grey - Rp301-Grey - 957-Rp301Gf1

This hypalon, molded rubber pad is used to clip stand-offs to inflatable boats.

Weaver Rp301 Stand-Off Pad, Black - Rp301 - 957-Rp301F1

This hypalon, molded rubber pad is used to clip stand-offs to inflatable boats.

Weaver Rp101G Spare Pad For Rbd100 & Rbd150, Grey - Rp101-Grey - 957-Rp101Gf1

Spare Pad for RBD100 & RBD150.

Weaver Rp101 Spare Pad For Rbd100 & Rbd150, Black - Rp101 - 957-Rp101F1

Spare Pad for RBD100 & RBD150.

Weaver Rbd150G Transom Snap Davits For Inflatables, Grey - Rbd150G - 957-Rbd150Gf1

Designed for inflatable boats with a total weight of 150 lbs or less. 100% solid stainless steel, all hardware included. Push release and snap hook-up prevents pinched fingers. Provides safe entry to and exit from inflatable dinghy. Hypalon, molded rubber parts, resistant to sun and salt.

Weaver Rbd100Garct1 Transom Arc Davits For Inflatables, 16"-17" Tubes - Rbd100G-Arc1 - 957-Rbd100Garct1F1

The Arc transfers the weight of heavier outboards from the transom of the inflatable to the swim platform. The stainless steel Arc is built to be removed when not in use. The Arc snaps easily into the davit head on the swim platform. Includes a special receiver bracket that mounts on the inflatable transom. It's simple receiver release pin allows for easy removal and storage.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions

Weaver Rbd100G Swim Grid Snap Davits For Inflatables, Grey - Rbd100G - 957-Rbd100Gf1

Designed for inflatable boats with a total weight of 150 lbs or less. 100% solid stainless steel, all hardware included. Push release and snap hook-up prevents pinched fingers. Provides safe entry to and exit from inflatable dinghy. Hypalon, molded rubber parts, resistant to sun and salt.

Weaver Rbd100 Swim Grid Snap Davits For Inflatables, Black - Rbd100 - 957-Rbd100F1

Designed for inflatable boats with a total weight of 150 lbs or less. 100% solid stainless steel, all hardware included. Push release and snap hook-up prevents pinched fingers. Provides safe entry to and exit from inflatable dinghy. Hypalon, molded rubber parts, resistant to sun and salt.

Weaver Quickw Quick Removal Kit For Weaver Winch - Qrk - 957-Quickwf1

Quick Removal Kit for Weaver Winch

Weaver Quick Kit, 2/Pk - Quickkit - 957-Quickf1

Receiver plates for easy removal of the Davit Heads from the swim platform for use with the RBD100 and SSHR for the SD1. Comes with all the mounting hardware plus the pin and lanyard. Not to be used with RS150.

Weaver Pins Small Push Pin - Short-Pin - 957-Pinsf1

Small Push Pin

Weaver Pinl Large Push Pin - Long-Pin - 957-Pinlf1

Large Push Pin

Weaver Pin&Lanyard Replacement Pin & Lanyard - Quick-Pin - 957-Pin&Lanyardf1

Replacement Pin & Lanyard

Weaver Mst Motosto Transom Mount Motor Bracket - Motosto-Tr - 957-Mstf1

Allows you to store your 15 hp or smaller on the transom of your yacht. When under way the bracket is in normal position and when using the motor the bracket can be swung out of the way against the transom. This bracket is not removable.

Weaver Mss Motosto Swim Platform Motor Bracket - Motosto-Sw - 957-Mssf1

Allows you to remove your motor from your dinghy and place it on the swim platform in a horizontal position before getting out of your dinghy. The bracket is removable from the swim step leaving a low profile receiver plate on the swim platform similar to the Weaver Quick Kit bracket. Dimensions 13" W x 5" D x 10" H.

Weaver Motokr8 Weaver Moto Kicker Swim Platform Motor Bracket - Moto-Kr8 - 957-Motokr8F1

This trolling motor fixed bracket is designed to install on a swim platform. It will hold up to a 9.9 hp 4 stroke engine. Made for the marine enviroment from 304 s/s with welded seams. The mounting pad is made from Starboard. Bracket dimensions 11.25"W x 5"D (+1.5" Pad) x 8"H.

Weaver Leaverstds Standard Weaver Leaver, Starboard Side - Leaver-S - 957-Leaverstdsf1

Designed to be used with Weaver Snap Davits. It allows your outboard to remain upright while your inflatable is in the vertical position. The Weaver Leaver is made of rugged stainless steel and accommodates outboards that are mounted to pivot either to the port or starboard. 13" of clear transom is required. Will not work with motors that have power trim and tilt. These units are easily switched port to starboard. Standard: For transoms up to 4" down from the top of the tube. Visit weaverindustries.com for Additional Info & Measurement Instructions

Weaver Leaverstdp Standard Weaver Leaver, Port Side - Leaver-P - 957-Leaverstdpf1

Designed to be used with Weaver Snap Davits. It allows your outboard to remain upright while your inflatable is in the vertical position. The Weaver Leaver is made of rugged stainless steel and accommodates outboards that are mounted to pivot either to the port or starboard. 13" of clear transom is required. Will not work with motors that have power trim and tilt. These units are easily switched port to starboard. Standard: For transoms up to 4" down from the top of the tube. Visit weaverindustries.com for Additional Info & Measurement Instructions

Weaver Leaverm3S Model 3 Weaver Leaver, Starboard Side - Lvr-M3-S - 957-Leaverm3Sf1

Designed to be used with Weaver Snap Davits. It allows your outboard to remain upright while your inflatable is in the vertical position. The Weaver Leaver is made of rugged stainless steel and accommodates outboards that are mounted to pivot either to the port or starboard. 13" of clear transom is required. Will not work with motors that have power trim and tilt. These units are easily switched port to starboard. Model 3: For deep transoms up to 6" down from the top of the tube. Visit weaverindustries.com for Additional Info & Measurement Instructions

Weaver Leaverm3P Model 3 Weaver Leaver, Port Side - Lvr-M3-P - 957-Leaverm3Pf1

Designed to be used with Weaver Snap Davits. It allows your outboard to remain upright while your inflatable is in the vertical position. The Weaver Leaver is made of rugged stainless steel and accommodates outboards that are mounted to pivot either to the port or starboard. 13" of clear transom is required. Will not work with motors that have power trim and tilt. These units are easily switched port to starboard. Model 3: For deep transoms up to 6" down from the top of the tube. Visit weaverindustries.com for Additional Info & Measurement Instructions

Weaver Lclip L Brackets For Standoffs, 4-Pack - Lclip - 957-Lclipf1

L Brackets for Standoffs, 4-Pack

Weaver Hoistleaver Hoist/Leaver - Hoist Delux - 957-Hoistleaverf1

Pick up your dinghy and motor at the same time using our foot operated hoist. Lifting from the Leaver bracket that your dinghy motor is attached to, the dinghy raises at the same time as the motor is swinging out over the swim platform. After the dinghy and motor are brought into the vertical position, the hoist remains hooked up to the dinghy/motor. For hard bottom dinghies. You will need to order the HDRBD202 davit system (not included) and at least one stand-off bracket at the bow of the inflatable for more stabilization. HD-RBD202 required for hoist/leaver installation, sold separately.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions

Weaver Hdrbd202 Heady Duty Davit System For Inflatables - Hd-Rbd201 - 957-Hdrbd202F1

This complete davit hook up allows you to attach a 10' to 12' inflatable dinghy to the swim platform. Only for hard bottom dinghies. It includes the HD-Front Arc, 2 HD-RS110 davit heads w/Quick Kits, and the Transom Arc (select the Transom Arc that you need for your dinghy). This will need to go with the Weaver Hoist/Leaver and will take weights up to 400 lbs..

Weaver Dhs Davit Head For 7'-9' Hard-Shelled Dinghies - Dhs - 957-Dhsf1

The Dinghy side of the Weaver Davit Systems for fiberglass dinghies.

Weaver Csbolt4 4" Spacer Bolts For Chocks - 4-Boltext - 957-Csbolt4F1

Designed to retrofit pads to a different height. Spacer Bolts to raise the pads up on the C1204, C1207 and C1208 chocks.

Weaver Csbolt3 3" Spacer Bolts For Chocks - 3-Boltext - 957-Csbolt3F1

Designed to retrofit pads to a different height. Spacer Bolts to raise the pads up on the C1204, C1207 and C1208 chocks.

Weaver Csbolt2 2" Spacer Bolts For Chocks - 2-Boltext - 957-Csbolt2F1

Designed to retrofit pads to a different height. Spacer Bolts to raise the pads up on the C1204, C1207 and C1208 chocks.

Weaver Csbolt1 1" Spacer Bolts For Chocks - 1-Boltext - 957-Csbolt1F1

Designed to retrofit pads to a different height. Spacer Bolts to raise the pads up on the C1204, C1207 and C1208 chocks.

Weaver Csbolt Standard Spacer Bolts For Chocks - Csbolt - 957-Csboltf1

Designed to retrofit pads to a different height. Spacer Bolts to raise the pads up on the C1204, C1207 and C1208 chocks.

Weaver C1208Rem Swivel (Removable) Dinghy Chocks, 4/Pk - C1208Crem - 957-C1208Remf1

Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Swivel: Pads swivel in any direction and can be adjusted up by using spacer bolts (sold separately). Removable: Includes Removable bases that let you remove the stanchions from your deck or bridge if you have an area you use for other purposes.

Weaver C1207Rem Swivel (Removable) Dinghy Chocks, 4/Pk - C1207Crem - 957-C1207Remf1

Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Swivel: Pads swivel in any direction and can be adjusted up by using spacer bolts (sold separately). Removable: Includes Removable bases that let you remove the stanchions from your deck or bridge if you have an area you use for other purposes.

Weaver C1204Rem Swivel (Removable) Dinghy Chocks, 4/Pk - C1204Crem - 957-C1204Remf1

Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Swivel: Pads swivel in any direction and can be adjusted up by using spacer bolts (sold separately). Removable: Includes Removable bases that let you remove the stanchions from your deck or bridge if you have an area you use for other purposes.

Weaver C1000Rem Standard Dinghy Chocks, 4/Pk - C1000Crem - 957-C1000Remf1

Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Standard: Pads go back and forth in one direction.

Weaver Arct2 Transom Arc Davits For Inflatables, 18" Tubes - Arc2 - 957-Arct2F1

The Arc transfers the weight of heavier outboards from the transom of the inflatable to the swim platform. The stainless steel Arc is built to be removed when not in use. The Arc snaps easily into the davit head on the swim platform. Includes a special receiver bracket that mounts on the inflatable transom. It's simple receiver release pin allows for easy removal and storage.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions

Weaver Arct1 Transom Arc Davits For Inflatables, 16"-17" Tubes - Arc1 - 957-Arct1F1

The Arc transfers the weight of heavier outboards from the transom of the inflatable to the swim platform. The stainless steel Arc is built to be removed when not in use. The Arc snaps easily into the davit head on the swim platform. Includes a special receiver bracket that mounts on the inflatable transom. It's simple receiver release pin allows for easy removal and storage.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions

Weaver Arcf Front Arc - Frontarc - 957-Arcff1

A fully adjustable 3-point mounting pad unit that glues to the fiberglass floor of inflatable dinghies. The unique design allows for a wide variety of adjustment points for most modern inflatables. A valuable companion to the Weaver Arc that is mounted on the transom. Together, the Weaver Arc and the Weaver Front Arc are highly effective in transferring the weight of inflatables to the Weaver Snap Davits.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions

Weaver 957-Rbd100Garct2 Transom Arc Davits For Inflatables, 18" Tubes - Rbd100G-Arc2 - 957-Rbd100Garct2F1

The Arc transfers the weight of heavier outboards from the transom of the inflatable to the swim platform. The stainless steel Arc is built to be removed when not in use. The Arc snaps easily into the davit head on the swim platform. Includes a special receiver bracket that mounts on the inflatable transom. It's simple receiver release pin allows for easy removal and storage.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions

Weaver 3001 Glue For Pvc Inflatables, 8 Oz. - 3001 Canadian Whmis - 957-3001F1

Glue for gluing on rubber pads onto PVC inflatables.

Weaver 2001 Glue For Hypalon Inflatables, 8 Oz. - 2001 Canadian Whmis - 957-2001F1

Glue for gluing on rubber pads onto Hypalon inflatables.

Weaver 1001 1-Part Pvc Glue, 30 Ml - Pvc1001 - 957-1001F1

To be used for temporary repair and patches only. DO NOT use for Davits or Handles.

Stand Off Adjust 24"-30" Pair Pmg - Soa24/30 - 957-Soa2430F1

Stand Off Adjust 18"-24" Pair Pmg - Soa18/24 - 957-Soa1824F1

Stand Off Adj 54-60"W/Clips Pr Pmg - Soa54/60Cbe - 957-Soa5460Cbef1

Stand Off Adj 48"-54" Pair Pmg - Soa48/54 - 957-Soa4854F1

Stand Off Adj 48-54"W/Clips Pr Pmg - Soa48/54Cbe - 957-Soa4854Cbef1

Stand Off Adj 42"-48" Pair Pmg - Soa42/48 - 957-Soa4248F1

Stand Off Adj 42-48"W/Clips Pr Pmg - Soa42/48Cbe - 957-Soa4248Cbef1

Stand Off Adj 36"-42" Pair Pmg - Soa36/42 - 957-Soa3642F1

Stand Off Adj 36-42 W/Clips Pr Pmg - Soa36/42Cbe - 957-Soa3642Cbef1

Stand Off Adj 30"-36" Pair Pmg - Soa30/36 - 957-Soa3036F1

Stand Off Adj 30-36 W/Clips Pr Pmg - Soa30/36Cbe - 957-Soa3036Cbef1

Stand Off Adj 24-30 W/Clips Pr Pmg - Soa24/30Cbe - 957-Soa2430Cbef1

Stand Off Adj 18-24 W/Clips Pr Pmg - Soa18/24Cbe - 957-Soa1824Cbef1

Stand Off Adj 12-18 W/Clips Pr Pmg - Soa12/18Cbe - 957-Soa1218Cbef1

Stand Off 60 W/Clips (2 Pmg - So-60-Cbe - 957-So60Cbef1

Stand Off 36" Pmg - So-36-Cbe - 957-So36Cbef1

Stand Off 36 (2/Set) Pmg - So-36 - 957-So36F1

Stand Off 30" Pmg - So-30 - 957-So30F1

Stand Off 30 W/Clips (2 Pmg - So-30-Cbe - 957-So30Cbef1

Stand Off 24 (2/Set) Pmg - So-24 - 957-So24F1

Stand Off 18 (2/Set) Pmg - So-18 - 957-So18F1

Stand Off 12" Pmg - So-12 - 957-So12F1