West Systems
Wooden Boat Restoration & Repair Manual - 002-970 - 655-002970F1
This manual shows you how to do professional level repairs and renovations that dramatically extend the life of your wooden boat. Dry rot repairs, stuctural frame repairs, and plank repairs using modern products and techniques are among the many solutions covered in this fully illustrated manual. Softcover 80 pages.
White Pigment 4 Oz. - 501-8 - 655-5018F1
Epoxy based liquid colorants used to tint the epoxy mixture to provide an even color base for the final finish system. The colored surfaces also tend to highlight flaws and imperfections. Add to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl. oz. of epoxy. One 4 fl. oz. bottle will tint approximately 1-1/2 gal. of epoxy. Pigmented epoxy will degrade under sunlight-not intended as an exterior finish.
West System User Manual - 2950 - 655-002950F1
The latest up-to-date information on WEST SYSTEM products. Covers epoxy resin, hardeners, additives, reinforcing materials, tools and supplies.
West System G/Flex Epoxy Kit, 4 Oz. (2Ea 4 Oz. Bottles) - C-650-K - 655-C650Kf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs. 650-K G/Flex Aluminum Kit: Contains 4 fl. oz. G/Flex 650 resin, 4 fl. oz. G/Flex 650 hardener (8 fl. oz. mixed epoxy), 2 reusable mixing stick/applicators, 2 12-cc syringes, 4 grams adhesive filler, 4 mixing cups, 1pair disposable neoprene gloves, 4 alcohol cleaning pans and complete handling and repair instructions.
West System G/Flex Epoxy Kit, 4 Oz. (2Ea 4 Oz. Bottles) - 650-K - 655-650Kf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.650-K G/Flex Aluminum Repair Kit: Contains 4 fl. oz. G/Flex 650 resin, 4 fl. oz. G/Flex 650 hardener (8 fl. oz. mixed epoxy), 2 reusable mixing stick/applicators, 2 12-cc syringes, 4 grams adhesive filler, 4 mixing cups, 1pair disposable neoprene gloves, 4 alcohol cleaning pans and complete handling and repair instructions.
West System G/Flex Epoxy Bottles, 8 Oz. (2Ea 4 Oz. Bottles) - C-650-8 - 655-C6508F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System G/Flex Epoxy Bottles, 8 Oz. (2Ea 4 Oz. Bottles) - 650-8 - 655-6508F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System G/Flex Epoxy 2 Gallon Kit (2Ea Gal. Cans) - C-650-2G - 655-C6502Gf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System G/Flex Epoxy 2 Gallon Kit (2Ea Gal. Cans) - 6502G - 655-6502Gf1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System G/Flex C65032 Epoxy, 32 Oz. (2Ea 16 Oz. Bottles) - C-650-32 - 655-C65032F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System G/Flex 65032 Epoxy, 32 Oz. (2Ea 16 Oz. Bottles) - 65032 - 655-65032F1
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.
West System C209Sc Extra Slow Hardener, 5.3 L (1.4 Gallon) - C-209-Sc - 655-C209Scf1
Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.
West System C209Sb Extra Slow Hardener, 1.24 L (42.2Oz.) - C-209-Sb - 655-C209Sbf1
Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.
West System C209Sa Extra Slow Hardener, 315 Ml (10.6 Oz.) - C-209-Sa - 655-C209Saf1
Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.
West System C207Sc Special Clear Hardener, 5.49 L (1.4 Gallon) - C-207-Sc - 655-C207Scf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System C207Sb Special Clear Hardener, 1.24 L (42.2Oz.) - C-207-Sb - 655-C207Sbf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System C207Sa Special Clear Hardener, 315 Ml (10.6 Oz.) - C-207-Sa - 655-C207Saf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System C205 Hardener, 814 Ml (27.5 Oz.) - C-205-B - 655-C205Bf1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System C205 Hardener, 42.81 L (11.31 Gal) - C-205-E - 655-C205Ef1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System C205 Hardener, 3.56 L (.94 Gal) - C-205-C - 655-C205Cf1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System C205 Hardener, 208 Ml (7 Oz.) - C-205-A - 655-C205Af1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System C105E Resin - 197 L (52.03 Gal) - C-105-E - 655-C105Ef1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System C105C Resin - 16.46 L (4.35 Gal) - C-105-C - 655-C105Cf1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System C105B Resin - 3.74 L (.98 Gal) - C-105-B - 655-C105Bf1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System C105A Resin - 946 Ml (32 Oz.) - C-105-A - 655-C105Af1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System 885 Vacuum Bagging Kit - 885 - 655-885F1
A complete starter kit for repairs and small laminating projects up to 13 sq. ft. Kit includes: Venturi vacuum generator1/4" I.D. Vacuum Tubing (10')Vacuum Gauge (1)Junction "T" barbs (2)Release Fabric (15 sq. ft.)Breather Fabric (15 sq. ft.)Vacuum Bag Film (15 sq. ft.)Vacuum Bag Sealant (25')Complete kit instructions002-150 Vacuum Bagging Techniques002-150 Vacuum Bagging Techniques
West System 88220 Vacuum Bagging Film - 882-20 - 655-88220F1
Clear, heat-stabilized, modified nylon resin film. Can be used at temperatures up to 350°F (176°C) for typical composite cure cycle times. A tough, stretchable film for high vacuum pressures.
West System 809 Notched Spreader, 36/Case - 809 - 655-809F1
Lightweight and reusable. For fairing and filling applications.Double edged. 3-1/2" x 6".
West System 806 Poly Mixing Pot, 32 Oz., 180/Case - 806 - 655-806F1
Strong and reusable. Cured epoxy easily pops out.
West System 805 Poly Mixing Pot, 16 Oz., 240/Case - 805 - 655-805F1
Strong and reusable. Cured epoxy easily pops out.
West System 802W Heavy-Duty Roller Pan, 12/Case - C-802 - 655-802Wf1
An inexpensive, flexible plastic pan. Epoxy can be popped out after curing. Eliminates need for liners.
West System 802 Heavy-Duty Roller Pan, 12/Case - 802 - 655-802F1
An inexpensive, flexible plastic pan. Epoxy can be popped out after curing. Eliminates need for liners.
West System 733W 9 Oz. Glass Reinforcing Tape, 6" X 10', 2/Case - C-733 - 655-733Wf1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 733 9 Oz. Glass Reinforcing Tape, 6" X 10', 2/Case - 733 - 655-733F1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 732W 9 Oz. Glass Reinforcing Tape, 4" X 10', 3/Case - C-732 - 655-732Wf1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 73210 9 Oz. Glass Reinforcing Tape, 4" X 10', 10/Case - 732-10 - 655-73210F1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 732 9 Oz. Glass Reinforcing Tape, 4" X 10', 3/Case - 732 - 655-732F1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 731 9 Oz. Glass Reinforcing Tape, 3" X 50 Yds., 4/Case - 731 - 655-731F1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 729W 9 Oz. Glass Reinforcing Tape, 2" X 50 Yds., 6/Case - C-729 - 655-729Wf1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 72910 9 Oz. Glass Reinforcing Tape, 2" X 10', 15/Case - 729-10 - 655-72910F1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 729 9 Oz. Glass Reinforcing Tape, 2" X 50 Yds., 6/Case - 729 - 655-729F1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 403B Microfibers, Off-White, 20 Lb. - 403-B - 655-403Bf1
A fine fiber blend used as a thickening additive that builds volume quickly and blends easily to create a multi-purpose adhesive especially for bonding wood. Epoxy thickened with microfibers has good gap filling qualities while retaining excellent wetting/penetrating capability. Cures to an Off-White color.
West System 4039 Microfibers, Off-White, 6 Oz., 24/Case - 403-9 - 655-4039F1
A fine fiber blend used as a thickening additive that builds volume quickly and blends easily to create a multi-purpose adhesive especially for bonding wood. Epoxy thickened with microfibers has good gap filling qualities while retaining excellent wetting/penetrating capability. Cures to an Off-White color.
West System 40328 Microfibers, Off-White, 20 Oz., 12/Case - 403-28 - 655-40328F1
A fine fiber blend used as a thickening additive that builds volume quickly and blends easily to create a multi-purpose adhesive especially for bonding wood. Epoxy thickened with microfibers has good gap filling qualities while retaining excellent wetting/penetrating capability. Cures to an Off-White color.
West System 30625 Large Capacity 306 Metering Pump, 5:1 Ratio - 30625 - 655-30625F1
For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. Reduces mixing time and waste on large projects. Carry handle allows you to move the pump where the work is. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0.5 fl oz of resin/hardener per pump stroke (about 1 qt per minute). Can be converted to a 3:1 ratio.
West System 209Sc Extra Slow Hardener, 1.45 Gallon - 209-Sc - 655-209Scf1
Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.
West System 209Sb Extra Slow Hardener, .33 Gallon - 209Sb - 655-209Sbf1
Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.
West System 209Sa Extra Slow Hardener, .66 Pint - 209-Sa - 655-209Saf1
Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.
West System 207Se Special Clear Hardener, 65.64 L (17.34 Gallon) - 207-Se - 655-207Sef1
Use with 105 resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with #300 pumps.
West System 207Sc Special Clear Hardener, 1.45 Gallon - 207-Sc - 655-207Scf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System 207Sb Special Clear Hardener, .33 Gallon - 207-Sb - 655-207Sbf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System 207Sa Special Clear Hardener, .66 Pint - 207-Sa - 655-207Saf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System 205 Hardener, 11.31 Gallon - 205-E - 655-205Ef1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System 205 Hardener, .94 Gallon - 205C - 655-205Cf1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System 205 Hardener, .86 Quart - 205B - 655-205Bf1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System 205 Hardener, .44 Pint - 205A - 655-205Af1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System 105E Resin - 52.03 Gallon - 105-E - 655-105Ef1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System 105C Resin - 4.35 Gallon - 105-C - 655-105Cf1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System 105B Resin - .98 Gallon - 105-B - 655-105Bf1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System 105A Resin - Quart - 105-A - 655-105Af1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
Vacuum Bag Sealant - 883 - 655-883F1
Mastic tape sealant for airtight seals between vacuum bags and molds. Easy to work around difficult angles, patching small leaks in the vacuum system.
Syringes (2/Pk) - 807-2 - 655-8072F1
Reusable. Load with epoxy mixture for injecting into tight spots. Ideal for hardware bonding and plywood repairs.
Syringes (12/Pk) - 807-12 - 655-80712F1
Reusable. Load with epoxy mixture for injecting into tight spots. Ideal for hardware bonding and plywood repairs.
Static Mixer 2 Count Pk/2 - 600-2 - 655-6002F1
Combines the strength and reliability of a two-part WEST SYSTEM® epoxy with point-and-shoot convenience. The self-metering coaxial cartridge dispenses a gap-filling structural epoxy that bonds to wood, metals, fiberglass and concrete. The tube comes with a static mixer that lets you lay down a bead of thickened epoxy with any standard caulking gun.Six10's shear thinning properties make it "thinner" as it's worked. It can be easily tooled into a non-sagging fillet or used to wet out light to moderate reinforcing fabrics like fiberglass. The hardener provides a long open time but has fast thru-cure. Six10 stays workable in the static mixer for 42 minutes, making it practical for long or complicated assemblies.
Static Mixer 12 Count Pack/12 - 600-12 - 655-60012F1
Combines the strength and reliability of a two-part WEST SYSTEM® epoxy with point-and-shoot convenience. The self-metering coaxial cartridge dispenses a gap-filling structural epoxy that bonds to wood, metals, fiberglass and concrete. The tube comes with a static mixer that lets you lay down a bead of thickened epoxy with any standard caulking gun.Six10's shear thinning properties make it "thinner" as it's worked. It can be easily tooled into a non-sagging fillet or used to wet out light to moderate reinforcing fabrics like fiberglass. The hardener provides a long open time but has fast thru-cure. Six10 stays workable in the static mixer for 42 minutes, making it practical for long or complicated assemblies.
Slow Hardener - 11.31 Gallon - 206-E - 655-206Ef1
Use with 105 Resin, 5:1, yields high strength, rigid, moisture resistant solid. Pot life at 72° F is 20 to 25 minutes. Use with 300 Mini Pumps.
Slow Hardener - .94 Gallon - C-206-C - 655-C206Cf1
Use with 105 Resin, 5:1, yields high strength, rigid, moisture resistant solid. Pot life at 72° F is 20 to 25 minutes. Use with 300 Mini Pumps.
Slow Hardener - .94 Gallon - 206-C - 655-206Cf1
Use with 105 Resin, 5:1, yields high strength, rigid, moisture resistant solid. Pot life at 72° F is 20 to 25 minutes. Use with 300 Mini Pumps.
Slow Hardener - .86 Quart - C-206-B - 655-C206Bf1
Use with 105 Resin, 5:1, yields high strength, rigid, moisture resistant solid. Pot life at 72° F is 20 to 25 minutes. Use with 300 Mini Pumps.
Slow Hardener - .86 Quart - 206B - 655-206Bf1
Use with 105 Resin, 5:1, yields high strength, rigid, moisture resistant solid. Pot life at 72° F is 20 to 25 minutes. Use with 300 Mini Pumps.
Slow Hardener - .44 Pint - C-206-A - 655-C206Af1
Use with 105 Resin, 5:1, yields high strength, rigid, moisture resistant solid. Pot life at 72° F is 20 to 25 minutes. Use with 300 Mini Pumps.
Slow Hardener - .44 Pint - 206-A - 655-206Af1
Use with 105 Resin, 5:1, yields high strength, rigid, moisture resistant solid. Pot life at 72° F is 20 to 25 minutes. Use with 300 Mini Pumps.
Six 10 R/H Adhesive - 610 - 655-610F1
Combines the strength and reliability of a two-part WEST SYSTEM® Epoxy with point-and-shoot convenience. The self-metering coaxial cartridge dispenses a gap-filling structural epoxy that bonds to wood, metals, fiberglass and concrete. The tube comes with a static mixer that lets you lay down a bead of thickened epoxy with any standard caulking gun.Six10's shear thinning properties make it "thinner" as it's worked. It can be easily tooled into a non-sagging fillet or used to wet out light to moderate reinforcing fabrics like fiberglass. The hardener provides a long open time but has fast thru-cure. Six10 stays workable in the static mixer for 42 minutes, making it practical for long or complicated assemblies.
Scarffer™ - 875 - 655-875F1
A unique tool for cutting accurate scarf joints in plywood up to 3/8" thick. Attaches easily to most circular saws and is simple to remove.
Roller Covers, 7" - 800-2 - 655-8002F1
Specially designed, high-density polyurethane foam rollers. Ideal for epoxy application. Can be cut into shorter lengths to match area.
Reusable Mixing Sticks (8/Pk) - 804-8 - 655-8048F1
Perfect for filleting or for scraping excess epoxy from surfaces. Reusable.
Reusable Mixing Sticks (60/Pk - 804-60 - 655-80460F1
Perfect for filleting or for scraping excess epoxy from surfaces. Reusable.
Resin & Hardener, 190 Ml. - C-610 - 655-C610F1
Combines the strength and reliability of a two-part WEST SYSTEM® Epoxy in a point-and-shoot package. The self-metering coaxial cartridge dispenses a gap-filling structural epoxy that bonds to wood, metals, fiberglass and concrete. Six10 Thickened Epoxy Adhesive meters the proper ratio of epoxy resin and hardener from a multi-chambered tube that fits in any standard caulking gun. The pre-thickened components travel through a static mixer where they are fully blended before being dispensed in a smooth, workable bead. Six10's shear thinning properties make it "thinner" as it's worked. It can be easily tooled into a non-sagging fillet or used to wet out light to moderate reinforcing fabrics like fiberglass. The hardener provides a long open time but has fast thru-cure. Stays workable in the static mixer for 42 minutes, making it practical for long or complicated assemblies. Incudes one 600 Static Mixer.
Resin & Hardener Packets - 101-T - 655-101Tf1
101T: Includes Six 105 Resin/205 Fast Hardener packets only. Each pre-measured packet contains 16 grams of 105 Resin and 3.2 grams of 205 Fast hardener (19.2 grams or .56 fluid oz of mixed epoxy).
Release Fabric 60" X 10 Yds - 879-10 - 655-87910F1
Economical but tough, finely woven nylon fabric treated with a release agent. Used to separate the absorber, breather and vacuum bag from the laminate in vacuum bagging operations. Also used in hand lay-up applications to allow more squeegee pressure and protect the lay-up from contamination. Peels easily and leaves a smooth textured surface, ready for bonding or finishing. Not recommended for post-cure temps over 120°F .
Release Fabric 60 X9 - 879-18 - 655-87918F1
Economical but tough, finely woven nylon fabric treated with a release agent. Used to separate the absorber, breather and vacuum bag from the laminate in vacuum bagging operations. Also used in hand lay-up applications to allow more squeegee pressure and protect the lay-up from contamination. Peels easily and leaves a smooth textured surface, ready for bonding or finishing. Not recommended for post-cure temps over 120°F .
Release Fabric 60 X 2 Yd - 879-2 - 655-8792F1
Economical but tough, finely woven nylon fabric treated with a release agent. Used to separate the absorber, breather and vacuum bag from the laminate in vacuum bagging operations. Also used in hand lay-up applications to allow more squeegee pressure and protect the lay-up from contamination. Peels easily and leaves a smooth textured surface, ready for bonding or finishing. Not recommended for post-cure temps over 120°F .
Rebuild Kit For All Pumps - 306Kit - 655-306Kitf1
For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. Reduces mixing time and waste on large projects. Carry handle allows you to move the pump where the work is. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0.5 fl oz of resin/hardener per pump stroke (about 1 qt per minute). Can be converted to a 3:1 ratio.Rebuild Kit (306KIT): Includes: seals, balls, gaskets, springs, high-rise tubes with ferrules, new resin and hardener reservoirs with lids.
Plastic Spreaders, 2/Pk - 808-2 - 655-8082F1
Lightweight and reusable. For fairing and filling applications.Double edged. 3-1/2" x 6".
Plastic Spreaders, 12/Pk - 808-12 - 655-80812F1
Lightweight and reusable. For fairing and filling applications.Double edged. 3-1/2" x 6".
Mini Pump Set 300 For Group A, B, Or C - 300 - 655-300F1
The 300 Mini Pump Set, containing three pumps-the 105 Resin pump, a 205/206 Hardener pump (5:1 ratio), and a 207/209 Hardener pump (3:1 ratio). Designed for convenient and accurate metering of group size A, B and C. As packaged, the pumps are ready to go into the Group Size B containers. A package of extension tubes for Group Size A containers is included with the set. Group Size C extension tubes are included in the 105-C Resin and in the 207-SC or 209-SC packages. Made of durable polypropylene, the pumps give years of dependable service. Read and follow the priming, ratio verification and operating instructions that come with the pumps.
Microlight Filler - 5 Oz. - C-410-7 - 655-C4107F1
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than 407 Low-Density filler or microballoons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color.
Microlight Filler - 5 Oz. - 410-7 - 655-4107F1
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than 407 Low-Density filler or microballoons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color.
Microlight Filler - 4 Lb - C-410-B - 655-C410Bf1
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than 407 Low-Density filler or microballoons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color.
Microlight Filler - 4 Lb - 410-B - 655-410Bf1
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than 407 Low-Density filler or microballoons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color.
Microlight Filler - 2 Oz. - C-410-2 - 655-C4102F1
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than 407 Low-Density filler or microballoons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color.
Microlight Filler - 2 Oz. - 410-2 - 655-4102F1
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than 407 Low-Density filler or microballoons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color.
Low Density Filler - 4 Oz. - C-407-5 - 655-C4075F1
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color.
Low Density Filler - 4 Oz. - 4075 - 655-4075F1
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color.
Low Density Filler - 14 Lb - 407-B - 655-407Bf1
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color.
Low Density Filler - 12 Oz. - 407-15 - 655-40715F1
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color.
High-Density Filler-15.2 Oz. - 404-15 - 655-40415F1
A thickening additive developed for maximum physical properties in hardware bonding where high cyclic loads are anticipated. It can also be used for filleting and gap filling where maximum strength is necessary. Cures to an Off-White color.
