3M
Wool Compounding Pad Dualside - 5753 - 71-05753F1
High performance double sided, 100% wool compounding pad. Refines P1200 and finer sand scratches and other paint surface defects. Quick connect design attachment. For use with 3M™ quick release adaptor (#05752)
Wood Finishing Pad - 7415 - 71-07415F1
For smoothing bare wood, rubbing in furniture oils and denibbing between coats of stain, sealer or varnish. Made from a tough synthetic material that won't rust or splinter like steel wool.Sold in case pack of 10 only.
Wire Marker Tape Dispenser - 49518 - 71-49518F1
Provides a fast convenient system for marking wire, cable, or vacuum hoses. Special end loop for hooking on belt or tool pouch. 10 refillable compartments allow you to choose the exact number or color combinations you need.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 80C - 051144-02018 - 71-02018F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 60C @50 - 051141-24001 - 71-24001F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 600A - 2000 - 71-02000F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 400A - 2002 - 71-02002F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 320A - 2004 - 71-02004F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 220A - 2007 - 71-02007F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 180C - 051144-02014 - 71-02014F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 150C - 051144-02015 - 71-02015F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 120C - 051144-02016 - 71-02016F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Wet Or Dry™ Tri-M-Ite Paper Sheets, 100C - 051144-02017 - 71-02017F1
To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.
Vinyl Duct Tape - #3903 - 6984 - 71-06984F1
Embossed vinyl film coated with rubber adhesive designed for general sealing, color coding, masking, wrapping and bundling, protecting and other light duty applications where easy unwind, easy tear and less adhesive transfer are important
Vapor Resp Assemblylg. 5301 - 5301 - 71-5301F1
NIOSH approved against certain organic vapors. Use in a variety of workplace applications. Protects against a variety of gases and vapors according to NIOSH approvals. Pre-assembled with permanently attached organic vapor cartridges. Low profile design.
Utility Cloth 220G 1-1/2X50Yds - 5025 - 71-05025F1
For light deburring, clean-up and finishing metal surfaces.
Utility Cloth 180G 1-1/2X50Yds - 5026 - 71-05026F1
For light deburring, clean-up and finishing metal surfaces.
Utility Cloth 100G 1-1/2X50Yds - 5029 - 71-05029F1
For light deburring, clean-up and finishing metal surfaces.
Trizact™ P3000 Hookit™ Foam Disc - 2085 - 71-02085F1
Foam disc used in a spot repair system for removing P1200-P1500 grade sand scratches. For hand sanding or machine. No holes. Hookit attachment
Superfine Sanding Sponge 20/Bx - 2602 - 71-02602F1
Provides flexibility and conformability to allow for sanding by hand in areas inaccessible to machine sanding. They feature aluminum oxide mineral coating on a foam pad with a waterproof bonding system. Can be used either wet or dry when sanding on wood, fiberglass/gelcoat, marine paints, metals and plastic.
Superbuff™ Polishing Pad - 5705 - 71-05705F1
Double sided, soft edge polishing pad designed for use with a polisher and glaze. Superbuff™ polishing pad is made with extremely fine fibers to produce a high gloss on paint surfaces. Pad has its own built in, lightweight support system.
Superbuff™ Iii 2 Plus 2 Buffing Pad - 5704 - 71-05704F1
Blended wool. Double sided. For general use with stiffer central hub for more cutting power. Excellent for all paints and clears. Fits all standard (5/8" Shaft) polishers. Use with adaptor 05710.
Superbuff™ Buffing Pad - 5703 - 71-05703F1
100% wool, double-sided, white pad with a stiffer central hub for more cutting power. This pad has untwisted yarn construction, which allows for more surface contact, while giving excellent cut and finish. Excellent for all paints and clear coats.
Superbuff™ Adapter #05710 - 5710 - 71-05710F1
Adaptor for the 3M™ Superbuff™ Buffing Pads (PNs 05700, 05703, 05704, and 05705). Has a 5/8-11 internal thread which turns in to a polisher, and a short 5/8-11 external thread on other end. Works with 3M™ Perfect-It™ Backup Pad (PN 05718).
Super Trim Spray Adhesive - 8090 - 71-08090F1
Aerosol contact adhesive designed for bonding vinyl tops, heavyweight liners and hood silencer pads where high strength and heat resistance are needed. Fast-acting, high-strength, aerosol contact adhesive. Resistant to heat and plasticizing oils. Excellent for attaching vinyl, insulation, foam, padding and rubber parts to metal and other surfaces
Super Duty Rubbing Compound, Gal. - 5955 - 71-05955F1
Recommended for heavy aggressive compounding of paint. Clings to paint surface. Remains wet on the job with little or no mess. Maintains high rate of cut with constant pressure. Buffs to high gloss with minimum swirl marks. For hand or machine.
Super 74 Orange Foam Fast Adhesive - 82242 - 71-82242F1
Industrial grade. Excellent aerosol adhesive for general upholstery form bonding. Ideal for bonding flexible urethane or latex foam together or to many other materials including wood, metal, fabrics and non-vinyl plastics. Fast tack and non-misting; precise spray control and variable width spray.
Stripping Pad - 7413 - 71-07413F1
Designed for use with chemical strippers in removing paint and varnish. Made from a tough, non-woven synthetic material that won't rust or splinter like steel. 4-3/8" x 11".Sold in case pack of 10 only.
Stikit™ Soft Hand Pad - 5530 - 71-05530F1
For use with Stikit™ Sheet Rolls and Imperial color sanding paper sheets. This pad provides a soft controlled touch. Eliminates finger marks and edge cutting into primer and paint. Ideal for contour and light scuff sanding.Sold in a full box of 5 Only.
Stikit™ Soft 8" Disc Pad - 5568 - 71-05568F1
Orange vinyl pad face provides good adhesion and allows easy removal of discs. Soft foam construction and tapered edge offer high degree of conformability, providing uniform finish when sanding contours and curves. Fits all standard (5/8" shaft) slow speed polishers. Max. safe operating speed: 3000 RPM.
Stikit™ Sanding Block, 2-5/8" X 16" - 5696 - 71-05696F1
3M™ Stikit Hand Sanding Blocks help make sanding easier in difficult locations. You can use these products with the 3M Stikit sheet rolls to efficiently complete your repair or used with 3M Wetordry™ abrasives. Bright yellow color.
Stikit™ Sanding Block Kit - 5692 - 71-05692F1
Stikit™ foam sanding block kit contains the top seven most popular blocks packaged in a blister pack. Kit contains: PN#05693, 05694, 05695, 05672, 15669 and two 05668 blocks.
Stikit™ Disc Hand Pad - 5591 - 71-05591F1
For hand sanding. Eliminates finger marks and has excellent conformability when used on contours.
Stikit™ 8" Disc Pad, 45° - 5579 - 71-05579F1
Yellow vinyl pad face provides good adhesion of the discs and allows easy removal. Edges are contoured to allow for sanding curves and close to moldings. Fits all standard 5/8" shaft slow speed polishers. Fits all standard (5/8" shaft) slow speed polishers. Max. safe operating speed is 3000 RPM.
Stikit™ 6" Disc Pad - 5576 - 71-05576F1
Yellow vinyl pad face provides good disc adhesion yet allows easy disc removal. Pad is lightweight, shock resistant and well balanced. Maximum safe operating speed: 7000 RPM.
Stikit™ 5" Disc Pads - 5575 - 71-05575F1
Provides support on dual action sanders for 3M™ Stikit™ discs. Durable foam body. Yellow vinyl pad face provides good disc adhesion yet allows easy disc removal. Max operating speed: 10,000 RPM
Stikit Soft Hand Block - 5442 - 71-05442F1
Soft molded foam block with easy release hook face. Use with Stikit™ 2-3/4 inch wide rolls or sheetsfor leveling of repair area or following contours.
Stikit Goldsheet 4-1/2 P80 - 2698 - 71-02698 Superseded By: 71-02775F1
Coated aluminum oxide abrasive rolls bonded with resin and backed with pressure sensitive adhesive. Cut to desired length for use on vibrator sanders, fairing boards, and sanding blocks.
Stikit 4-1/2 Gold 120A - 2696 - 71-02696 Superseded By: 71-02776F1
Coated aluminum oxide abrasive rolls bonded with resin and backed with pressure sensitive adhesive. Cut to desired length for use on vibrator sanders, fairing boards, and sanding blocks.
Specialty Adhesive Remover - 38984 - 71-38984F1
VOC-compliant (70%) solvent-based liquid specialty adhesive remover is designed to remove reactive adhesives from a variety of substrates. Reactive adhesives include adhesives that require a hardener or catalyst in order for the bond to occur, such as expoxies, urethanes and silicones.
Slip Resistant Protective Film - Pm4N61Whi - 71-99603F1
Designed to be used at boat builders and repair yards to protect the gelcoat deck and hull surfaces. Provides temporary protection of non-skid gelcoat surfaces on decks and other sections of fiberglass boats. During assembly or refurbishment, and in the showroom, this product helps prevent damage and avoids costly repairs and clean-ups. White vinyl material. 4 mils. Non-skid and very tacky. For indoor or outdoor use.
Slip Resistant Protective Film - 99602 - 71-99602F1
Designed to be used at boat builders and repair yards to protect the gelcoat deck and hull surfaces. Provides temporary protection of non-skid gelcoat surfaces on decks and other sections of fiberglass boats. During assembly or refurbishment, and in the showroom, this product helps prevent damage and avoids costly repairs and clean-ups. White vinyl material. 4 mils. Non-skid and very tacky. For indoor or outdoor use.
Silver Duct Tape - #3939 - 6975 - 71-06975F1
Designed for general purpose use in bundling, sealing and holding applications.
Sharpshooter Cleaner Qt W/ - 048011-19344 - 71-19344F1
Designed to remove tough stains such as grease, lipstick, crayon, black heel marks and smoke film from most washable hard surfaces. Use on walls, floors, partitions, vinyl, chrome, grout, stainless steel, formica, fiberglass, ceramic or porcelain.
Scotchlok 314 Electrical Connector - 7100370157 - 71-09230F1
Contains a special compound inside connector to protect against corrosion in damp conditions. Handles 22-14 AWG solid or stranded wire. Wires held with double "U" element to provide much stronger connection while reducing electrical resistance.
Scotchblok Mask Paper 12" X 18"0 - 6732 - 71-06732F1
This superior masking paper offers the ultimate penetration resistance from all solvents used in todays gelcoat and paint systems. This bonded fiber formation reduces contamination of freshly painted and varnished surfaces. Provides excellent conformability and holds up well under wet sanding conditions.
Scotchblock Mask Paper 18X180 - 6738 - 71-06738F1
This superior masking paper offers the ultimate penetration resistance from all solvents used in todays gelcoat and paint systems. This bonded fiber formation reduces contamination of freshly painted and varnished surfaces. Provides excellent conformability and holds up well under wet sanding conditions.
Scotch-Weld™ Polyurethane Reactive Adhesive Ts230 - 511525165 - 71-25165F1
One component, 100% solids, moisture-curing urethane adhesive. Sprayable/extrudable grade adhesive with long set time for wide variety of plastics, including polystyrene and polyacrylic. Bonds aluminum and glass to plastic and wood.
Scotch-Grip™ Rubber & Gasket Adhesive 847 - 19718 - 71-19718F1
A premium quality multi-purpose adhesive. Develops strong flexible bonds very rapidly to a wide variety of substrates, including many plastics and rubbers, gasketing materials and leather. Resistant to most fuels and oil. Heat and solvent reactivatable. Curable with heat.
Scotch-Brite™ Multi Flex Abrasive Sheet Roll - 7521 - 71-07521F1
General Purpose. For very fine finish applications. Ultra flexible and conformable for cleaning or fine finishing. Pop-up dispensing saves time and eliminates waste. Replaces steel wool to eliminate contamination.
Scotch-Brite™ General Purpose Scouring Pad, Coarse - 4801105509 - 71-05509F1
Synthetic fiber scouring pad. It replaces steel wool and metal sponges. Long lasting and rust resistant.Priced individually. Sold in full boxes only.
Scotch-Brite™ General Purpose Scouring Pad - 8293 - 71-08293F1
Synthetic fiber scouring pad. It replaces steel wool and metal sponges. Long lasting and rust resistant.Priced individually. Sold in full boxes only.
Scotch-Brite Stripe Removal Disc Assembly - 7517 - 71-07517F1
Large Area Stripe Removal (LASR). Stacked, solid wafer construction. 16 layer disc assembly that quickly removes vinyl stripes and graphics and their adhesive without damaging gelcoat or marine paint. Designed to be used with a variable speed buffer with a 1,500-3,000 RPM speed range. Attaching a Scotch-Brite LASR adapter is all that is necessary to convert your 5/8"-11" shaft to accommodate the LASR disc assembly.
Scotch-Brite Molding Adhesive And Stripe Removal Disc Roloc+ - 7501 - 71-07501F1
A vinyl, nonabrasive material designed to remove vinyl stripes, letters and graphics from gelcoat and painted marine surfaces without damaging the finish. Required 4000 RPM tool.
Scotch Brite™ Surface Conditioning Disc Pad - 7494 - 71-07494F1
Disc pad connects quickly and easily to any power tool while holding Scotch-Brite™ hook and loop surface conditioning discs securely and safely. 1/4" shank size.
Sand Disc 6" 360L P800 100/Bo - 20805 - 71-20805F1
An aluminum oxide, open coat, load resistant Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing.
Sand Disc 6" 360L P600 100/Bo - 20804 - 71-20804F1
An aluminum oxide, open coat, load resistant Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing.
Sand Disc 6" 360L P400 100/Bo - 20802 - 71-20802F1
An aluminum oxide, open coat, load resistant Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing.
Sand Disc 6" 360L P320 100/Bo - 20801 - 71-20801F1
An aluminum oxide, open coat, load resistant Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing.
Sand Disc 6" 360L P220 100/Bx - 20798 - 71-20798F1
An aluminum oxide, open coat, load resistant Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing.
Sand Disc 6" 360L P1000 100/B - 20806 - 71-20806F1
An aluminum oxide, open coat, load resistant Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing.
Sand Disc 5" 360L P600 100/Bx - 1710 - 71-01710F1
An aluminum oxide, open coat, load resistant Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing.
Sand Disc 5" 360L P1000 100/B - 1712 - 71-01712F1
An aluminum oxide, open coat, load resistant Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing.
Rubbing Compound, Qt. - 5954 - 71-05954F1
Recommended for heavy aggressive compounding of paint. Clings to paint surface. Remains wet on the job with little or no mess. Maintains high rate of cut with constant pressure. Buffs to high gloss with minimum swirl marks. For hand or machine.
Rubber Sanding Block - 9292 - 71-09292F1
Made of pliable rubber for use on flat or contoured surfaces. Use with regular sandpaper.
Roloc Clean 'N' Strip Disc - 7466 - 71-07466F1
Discs are constructed of a three-dimensional, durable web. The perfect alternative to wire brushes for removing paint, rust and light grinding.
Respirator Cleaning Wipes - 504 - 71-504F1
Individually wrapped wipes designed for use with half mask and full facepiece respirators. Dispenser box can be wall mounted. Alcohol free. 8" x 10".
Red Hookit Film 6 P1500 25/Bx - 1184 - 71-01184F1
A reattacheable abrasive disc used for color sanding and paint finishing.
Red Hookit Film 6 P1200 25/Bx - 1185 - 71-01185F1
A reattacheable abrasive disc used for color sanding and paint finishing.
Red Hookit Film 6 P1000 25/Bx - 1186 - 71-01186F1
A reattacheable abrasive disc used for color sanding and paint finishing.
Red Hookit Disc 8 P80D 25/Bx - 1677 - 71-01677 Superseded By: 71-09271F1
A reattacheable abrasive disc used for color sanding and paint finishing.
Red Hookit Disc 6 P800A 50/Bx - 1187 - 71-01187F1
A reattacheable abrasive disc used for color sanding and paint finishing.
Red Hookit Disc 6 P600A 50/Bx - 1189 - 71-01189F1
A reattacheable abrasive disc used for color sanding and paint finishing.
Red Hookit Disc 6 P400A 50/Bx - 1218 - 71-01218F1
A reattacheable abrasive disc used for color sanding and paint finishing.
Red Hookit Disc 6 P320A 50/Bx - 1219 - 71-01219F1
A reattacheable abrasive disc used for color sanding and paint finishing.
Red Hookit Disc 6 P220A 50/Bx - 1221 - 71-01221F1
A reattacheable abrasive disc used for color sanding and paint finishing.
Red Hookit Disc 6 P150A 50/Bx - 1223 - 71-01223F1
A reattacheable abrasive disc used for color sanding and paint finishing.
Red Hookit Disc 6 P120A 50/Bx - 1224 - 71-01224F1
A reattacheable abrasive disc used for color sanding and paint finishing.
Red Hookit Disc 6 40D 25/Bx - 1262 - 71-01262 Superseded By: 71-09250F1
A reattacheable abrasive disc used for color sanding and paint finishing.
Red Hookit 2.75X16.5 P80 (25) - 1181 - 71-01181 Superseded By: 71-02768F1
Abrasive sheets used for blocking primer and putty that can be cut desired length for use on file shoes and sanding blocks.
Red Hookit 2.75X16.5 P220 (25) - 1178 - 71-01178F1
Abrasive sheets used for blocking primer and putty that can be cut desired length for use on file shoes and sanding blocks.
Red Hookit 2.75X16.5 P180 (25) - 1179 - 71-01179 Superseded By: 71-02771F1
Abrasive sheets used for blocking primer and putty that can be cut desired length for use on file shoes and sanding blocks.
Red Hookit 2.75X16.5 P150 (25) - 1180 - 71-01180 Superseded By: 71-02770F1
Abrasive sheets used for blocking primer and putty that can be cut desired length for use on file shoes and sanding blocks.
Red Hookit 2.75X16.5 40D (25) - 1182 - 71-01182 Superseded By: 71-02767F1
Abrasive sheets used for blocking primer and putty that can be cut desired length for use on file shoes and sanding blocks.
Red Abr 2-3/4X16.5 P80D 25/Bx - 1679 - 71-01679 Superseded By: 71-02798F1
Abrasive sheets used for blocking primer and putty that can be cut to the desired length for use on file shoes and sanding blocks.
Quick Connect Adaptor - 5752 - 71-05752F1
Polisher adaptor used to quickly connect and disconnect double sided buffing pads. Fits with 3M™ Perfect-It™ brand polishing pads. Easy to change between compound and polishing pads. 5/8 inch threads.
Professional Caulking Gun - 8993 - 71-08993F1
For use with adhesive, sealants and glazing compound cartridges.
Prod. Paper Sheets 80D Pkg/5 - 32115 - 71-32115F1
An aluminum oxide sheet. Paper backing. Dry sanding only on machine or by hand. Used for finishing plastic filler and scratch refinement of bare metal.
Premium Filler - Quart - 46005 - 71-46005F1
A two-component vinyl-ester filler designed for marine filling and fairing applications above and below the waterline. Resists water absorption into hulls, decks, and other fiberglass parts. Hardener included.
Premium Filler - Gallon - 46006 - 71-46006F1
A two-component vinyl-ester filler designed for marine filling and fairing applications above and below the waterline. Resists water absorption into hulls, decks, and other fiberglass parts. Hardener included.
Precision Masking Tape, 3/4" X 60 Yards - 6526 - 71-06526F1
Precision masking tape is a mint green paper masking tape made with a strong yet ultra-thin, ultra-smooth paper backing producing sharp paint lines with both solvent and waterborne paint systems. Removes easily without tearing or adhesive transfer.
Precision Masking Tape, 2" X 60 Yards - 6528 - 71-06528F1
Precision masking tape is a mint green paper masking tape made with a strong yet ultra-thin, ultra-smooth paper backing producing sharp paint lines with both solvent and waterborne paint systems. Removes easily without tearing or adhesive transfer.
Precision Masking Tape, 1/4" X 60 Yards - 6525 - 71-06525F1
Precision masking tape is a mint green paper masking tape made with a strong yet ultra-thin, ultra-smooth paper backing producing sharp paint lines with both solvent and waterborne paint systems. Removes easily without tearing or adhesive transfer.
Precision Masking Tape, 1" X 60 Yards - 6620 - 71-06620F1
Precision masking tape is a mint green paper masking tape made with a strong yet ultra-thin, ultra-smooth paper backing producing sharp paint lines with both solvent and waterborne paint systems. Removes easily without tearing or adhesive transfer.
Precision Masking Tape, 1-1/2" X 60 Yards - 6527 - 71-06527F1
Precision masking tape is a mint green paper masking tape made with a strong yet ultra-thin, ultra-smooth paper backing producing sharp paint lines with both solvent and waterborne paint systems. Removes easily without tearing or adhesive transfer.
Polyurethane Adhesive Sealant 550 Fast Cure - 62791 - 71-62791F1
A fast curing polyurethane designed to cosmetically seal and bond many applications including marine and specialty vehicle markets. Excellent adhesion to concrete, wood, aluminum, most lacquered metals, polyester, glass, and stone. Good for both above and below the water line in marine applications.Not for retail / consumer use
Perfect-It™ Wool Compounding Pad - 5719 - 71-05719F1
100% wool, single sided, compounding pad. Hookit attachment. For use with 3M™ Rubbing Compounds.
Perfect-It™ Gelcoat Medium Cutting Compound/Wax, Qt. - 051131-36106 - 71-36106F1
Specifically formulated for boats, RVs, and industrial gelcoats, this polish is ideal for one-step processes. Use whenever you want a durable wax finish. One step compound and waxCombines medium cutting power with a glossy finish and durable waxRemoves P1000 and finer scratches and protects the surfaceGreat for marine, RV, and industrial gelcoat surfacesStays wet longer so operators can use less, and see easier cleanup
Perfect-It™ Gelcoat Medium Cutting Compound/Wax, Gal. - 051131-36107 - 71-36107F1
Specifically formulated for boats, RVs, and industrial gelcoats, this polish is ideal for one-step processes. Use whenever you want a durable wax finish. One step compound and waxCombines medium cutting power with a glossy finish and durable waxRemoves P1000 and finer scratches and protects the surfaceGreat for marine, RV, and industrial gelcoat surfacesStays wet longer so operators can use less, and see easier cleanup
Perfect-It™ Gelcoat Light Cutting Compound/Wax, Qt. - 36110 - 71-36110F1
Specifically formulated for boats, RVs, and industrial gelcoats, this polish is ideal for one-step processes. Use whenever you want a durable wax finish. One step compound and waxCombines light cutting power with a glossy finish and durable waxRemoves P1500 and finer scratches and protects the surfaceGreat for marine, RV, and industrial gelcoat surfacesStays wet longer so operators can use less, and see easier cleanup
Perfect-It™ Gelcoat Light Cutting Compound/Wax, Gal. - 36111 - 71-36111F1
Specifically formulated for boats, RVs, and industrial gelcoats, this polish is ideal for one-step processes. Use whenever you want a durable wax finish. One step compound and waxCombines light cutting power with a glossy finish and durable waxRemoves P1500 and finer scratches and protects the surfaceGreat for marine, RV, and industrial gelcoat surfacesStays wet longer so operators can use less, and see easier cleanup
Perfect-It™ Gelcoat Heavy Cutting Compound, Qt. - 051131-36102 - 71-36102F1
This fast-cutting compound removes heavy oxidation, scratches, and other defects. Use 3M™ Perfect-It™ Gelcoat Heavy Cutting Compound for any P800 and finer scratches. Its improved formula has longer wet times for easier clean up and less dust. This formula works better in warm climates and allows you to use less material than before.
Perfect-It™ Gelcoat Heavy Cutting Compound, Gal. - 051131-36103 - 71-36103F1
This fast-cutting compound removes heavy oxidation, scratches, and other defects. Use 3M™ Perfect-It™ Gelcoat Heavy Cutting Compound for any P800 and finer scratches. Its improved formula has longer wet times for easier clean up and less dust. This formula works better in warm climates and allows you to use less material than before.
Perfect-It™ Foam Polishing Pad - 5738 - 71-05738F1
Black foam polishing pad that utilizes a 3M patented convoluted foam face. Reduced diameter loop attachment backing for added edge protection. Attaches to either backup pads (#05717 or 05718). Fits all 5/8" shafts on slow speed polishers.
Perfect-It™ Foam Compounding Pad, Single Sided, Flat Back - 5723 - 71-05723F1
Single sided foam compounding pad used to refine P1200 or finer sand scratches. Flat back design. Coarse foam compounding pad used to apply compound to remove sanding scratches and swirls. Medium cut. Convoluted foam face design holds compounds better to reduce slinging of compound. Suggested for use with Perfect-It™ Rubbing Compound (39060, 06085, 06086). Use backup pads 05717 or 05718.
Perfect-It™ Foam Compounding Pad - 5737 - 71-05737F1
Foam polishing pad utilizing 3M's patented convoluted foam face. New reduced diameter loop attachment backing for added edge protection. Fits all standard 5/8 inch shaft slow-speed polishers. Attaches to either Hookit™ Backup Pad - #05717, or 3M™ Perfect-It™ Backup Pad - #05718.
Perfect-It™ Ex Rubbing Compound - 36061 - 71-36061F1
3M™'s best rubbing compound when looking for EXtra performance: EXtra cuttingEXtra smooth handlingEXtremely easy to use and clean upPerforms better than other compounds in all conditions, especially EXtreme conditions
Perfect-It™ Ex Rubbing Compound - 36060 - 71-36060F1
3M™'s best rubbing compound when looking for EXtra performance: EXtra cuttingEXtra smooth handlingEXtremely easy to use and clean upPerforms better than other compounds in all conditions, especially EXtreme conditions
Perfect-It™ Boat Wax, Qt. - 36113 - 71-36113F1
Safe for gelcoat, paint, fiberglass, and metals and has a pleasant tropical scent. The pure wax finish protects against the elements. Leaves a brilliant, pure wax finishLong lasting protection for gelcoat, paint, fiberglass, & metalsImportant final step in refinishing your surfaces
Perfect-It™ Boat Wash, Qt. - 9035 - 71-09035F1
3M™ Perfect-It™ Boat Wash high-sudsing formula is gentle enough to clean without stripping wax. Cleans grime, algae, dirt, and other common marine contaminants from stem to stern. This Prep-Step allows for superior refinishing results. Concentrate, mix one ounce per gallon.
Perfect-It™ Backup Pad - 5718 - 71-05718F1
Specially designed backup pad for use with the 3M™ Superbuff™ Adaptor (PN 05710). This backup pad enables 3M™ Superbuff™ Pad users to use the 3M™ Perfect-It™ Foam Polishing Pad without having to remove the 3M™ Superbuff™ Adaptor from the shaft of the polisher. Fits all standard 5/8 in shaft slow-speed polishers.
Perfect-It Foam Polishing Pad - 5725 - 71-05725F1
Convoluted black, single sided foam face produces wheel/swirl free paint finish when used with 3M™ Perfect-It™ Foam Polishing Pad Glazes. Attaches to either 3M™ Hookit™ Back Up Pad (05717) or 3M™ Perfect-It™ Back Up Pad (05718).
Perfect It™ Ultrafine Foam Polishing Pad - 5708 - 71-05708F1
High performance double sided blue foam quick connect polishing pad. Eliminates swirl marks on painted surfaces; even on difficult dark colored cars. Unique quick connect design. Use with Perfect-It™ ultrafine machine polish and 3M™ quick connect adaptor (#05752).
Perfect It™ Foam Polishing Pad - 5707 - 71-05707F1
High performance double sided black foam polishing pad with quick connect. Provides high-gloss shine. For use with Quick Connect Adaptor (#05752).
Perfect It™ Foam Compounding Pad - 5706 - 71-05706F1
High performance double sided foam compounding pad. Refines P1200 or finer sand scratches. Unique quick connect design. For use with 3M™ compounds and 3M™ quick release adaptor (#05752).
Particulate Respirator 8511, N95 - 8511 - 71-8511F1
Designed for applications such as welding, soldering and other operations in which metal fumes are present, including those present with ozone and nuisance levels of organic vapors. It can also be used in grinding, sanding, sweeping, bagging and other dusty/hot operations. Features the 3M™ Cool Flow™ Exhalation Valve, a cake-resistant media, and adjustable straps. NIOSH certified to have at least a 95% filter efficiency at removing solid and liquid particles (excluding those containing oil). The innovative "M" nose clip helps provide a good seal against the face. The 3M cool flow exhalation valve reduces heat and humidity build up inside the respirator.
Particulate Respirator 8247, R95 W/Nuisance Level Organic Vapor Relief - 5113854358 - 71-8247R95F1
Designed to help provide comfortable protection against certain oil and non-oil based particles including those present with nuisance levels of organic vapors, such as solvents, degreasers, and resins. 3M recommended for relief against nuisance levels of organic vapors. Nuisance level refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower. Charcoal gray color.
Particulate Respirator 8210, N95 - 8210N95 - 71-8210N95F1
Designed to help provide comfortable, reliable worker protection against certain non-oil based particles. Its lightweight construction helps promote greater worker acceptance and comfort and increased wear time. Applications include grinding, sanding, sweeping, bagging and other dusty operations. Soft nose foam and adjustable noseclip help provide a custom fit and secure seal.
Particulate Respirator - 8577 - 71-8577F1
Use in settings that involve heat, humidity and long wear periods and where particles and nuisance levels of organic vapors may be present. Features the 3M™ Cool Flow™ Exhalation Valve for cool, dry comfort, and M-noseclip to help provide a custom fit and secure seal.
Paint Prep System Mini Cups & Collars - 16115 - 71-16115F1
Calibrated mixing cups, flexible liners, lids with built-in 200 micron filters, and locking rings. As freshly filtered paint is dispensed, the liner collapses. This allows the spray gun to be operated at any angle in any plane through 360°, including fully inverted. Expensive, unused paint can be saved in capped liner for storage and re-use. One pot for mixing and spraying. Up to 70% savings of cleaning solvent. Faster system from mixing to disposal. Less operator exposure to solvents.Liners sold separately.
Paint Prep System Large Cup & Collar 1/Bx - 16023 - 71-16023F1
Calibrated mixing cups, flexible liners, lids with built-in 200 micron filters, and locking rings. As freshly filtered paint is dispensed, the liner collapses. This allows the spray gun to be operated at any angle in any plane through 360°, including fully inverted. Expensive, unused paint can be saved in capped liner for storage and re-use. One pot for mixing and spraying. Up to 70% savings of cleaning solvent. Faster system from mixing to disposal. Less operator exposure to solvents.Liners sold separately.
Paint Prep System Cups & Collar Std (2/Bx) - 16001 - 71-16001F1
Calibrated mixing cups, flexible liners, lids with built-in 200 micron filters, and locking rings. As freshly filtered paint is dispensed, the liner collapses. This allows the spray gun to be operated at any angle in any plane through 360°, including fully inverted. Expensive, unused paint can be saved in capped liner for storage and re-use. One pot for mixing and spraying. Up to 70% savings of cleaning solvent. Faster system from mixing to disposal. Less operator exposure to solvents.Liners sold separately.
Paint Buster Hand Cleaner, 9.75 Oz. - 5975 - 71-05975F1
Cream type and offers superior performance in removal of marine bottom and topside paints, primers, varnishes, fairing compounds, putties, adhesive and sealants from skin. Non-toxic and non-caustic, enabling quick removal of marine repair and refinish materials from hands without the use of skin damaging solvents.
P80 2 3/4 X 25 Yd Stikit Gold - 2599 - 71-02599 Superseded By: 71-02781F1
Coated aluminum oxide abrasive rolls bonded with resin and a pressure-sensitive adhesive backing. Cut to desired length for use on file shoes and sanding blocks.
P400 2 3/4 X 45 Yd Stikit Gold - 2590 - 71-02590 Superseded By: 71-02788F1
Coated aluminum oxide abrasive rolls bonded with resin and a pressure-sensitive adhesive backing. Cut to desired length for use on file shoes and sanding blocks.
P320 2-3/4 Gold Sheet Rolls - 2591 - 71-02591 Superseded By: 71-02787F1
Coated aluminum oxide abrasive rolls bonded with resin and a pressure-sensitive adhesive backing. Cut to desired length for use on file shoes and sanding blocks.
P220 2-3/4 Gold Sheet Rolls - 2594 - 71-02594 Superseded By: 71-02785F1
Coated aluminum oxide abrasive rolls bonded with resin and a pressure-sensitive adhesive backing. Cut to desired length for use on file shoes and sanding blocks.
P180 2 3/4 X 45 Yd Stikit Gold - 2595 - 71-02595 Superseded By: 71-02784F1
Coated aluminum oxide abrasive rolls bonded with resin and a pressure-sensitive adhesive backing. Cut to desired length for use on file shoes and sanding blocks.
P150 2 3/4 X 45 Yd Stikit Gold - 2596 - 71-02596 Superseded By: 71-02783F1
Coated aluminum oxide abrasive rolls bonded with resin and a pressure-sensitive adhesive backing. Cut to desired length for use on file shoes and sanding blocks.
P120 2-3/4 Gold Sheet Rolls - 2597 - 71-02597 Superseded By: 71-02782F1
Coated aluminum oxide abrasive rolls bonded with resin and a pressure-sensitive adhesive backing. Cut to desired length for use on file shoes and sanding blocks.
P100 2 3/4 X 30 Yd Stikit Gold - 2598 - 71-02598F1
Coated aluminum oxide abrasive rolls bonded with resin and a pressure-sensitive adhesive backing. Cut to desired length for use on file shoes and sanding blocks.
Overspray Protective Sheeting - 6727 - 71-06727F1
High density, tear resistant, clear film that is treated on both sides for paint overspray adhesion. Folded to 3' for easy one-person application.
Orbital Sander Dust Exhaust - 051141-20453 - 71-20453F1
Use on 3M™ Orbital/Random Orbital sanders with self-generated vacuum.
Orbit Sander 6" Non Vac 5/16" - 51141203249 - 71-20324F1
The 3M™ Random Orbital Sanders are high quality, powerful .28hp tools pneumatically powered, light weight with a low profile. Along with 3M's high quality abrasives, produce superior finishes with long abrasive life and good cut rates. One sanding pad is included.3M™ No-Hole, Non-Vac Tool: with Stikit™ Disc Pad.3M™ Central Vacuum-Ready Orbital Sander: with Clean Sanding Hookit™ Disc Pad and threaded attachment feature that allows a 1" external threaded vacuum hose to be securely attached to the tool without having to worry about the hose becoming disconnected.3M™ Self-Generated Vacuum Orbital Sander: designed to work with 3M's proprietary clean sanding dust collection system, the self-generated vacuum model works harder to trap and contain airborne particles during the finishing process. The central vacuum-ready unit easily attaches and detaches to your central vacuum system. With Clean Sanding Hookit™ Disc Pad. Easily attaches & detaches to central vacuum system.
Oil & Fuel Absorbent Bilge Pillow - 29026 - 71-29026F1
Toss it in the bilge, and it soaks up oil and gasoline, but repels water. The bilge water can then be pumped overboard legally.
Non-Skid Cleaner, Qt. - 9063 - 71-09063F1
Designed to clean hard to reach ground dirt and stains on non-skid decks. Safe for use on fiberglass, metal and painted surfaces.
Multi-Purpose Boat Soap, 16 Oz. - 9034 - 71-09034F1
Cleans anything from dirty decks to soiled fabrics to degreasing engines. Cleans grease, oil, grime and algae. Mix concentrate with water for desired cleaning strength.
Mildew Stain Remover, 16.9 Oz. - 9067 - 71-09067F1
Quickly removes mildew stains on vinyl, covers, cushions and other marine surfaces.
Mildew Res.Silicone(White)Cart - 8027 - 71-08027F1
Adheres to metal, fiberglass, glass, non-oily woods and many plastics and abraded rubbers. Ideal for head and galley sealing applications. It forms a mildew-resistant, non-yellowing seal that remains flexible even after years of exposure.
Mildew Res.Silicone(Clr)Cart - 8029 - 71-08029F1
Adheres to metal, fiberglass, glass, non-oily woods and many plastics and abraded rubbers. Ideal for head and galley sealing applications. It forms a mildew-resistant, non-yellowing seal that remains flexible even after years of exposure.
Mildew Res. Silicone-White 3 Oz. - 8017 - 71-08017F1
Adheres to metal, fiberglass, glass, non-oily woods and many plastics and abraded rubbers. Ideal for head and galley sealing applications. It forms a mildew-resistant, non-yellowing seal that remains flexible even after years of exposure.
Mildew Res. Silicone-Clear 3 Oz. - 8019 - 71-08019F1
Adheres to metal, fiberglass, glass, non-oily woods and many plastics and abraded rubbers. Ideal for head and galley sealing applications. It forms a mildew-resistant, non-yellowing seal that remains flexible even after years of exposure.
Microfine Sanding Sponge 20/Bx - 2600 - 71-02600F1
Provides flexibility and conformability to allow for sanding by hand in areas inaccessible to machine sanding. They feature aluminum oxide mineral coating on a foam pad with a waterproof bonding system. Can be used either wet or dry when sanding on wood, fiberglass/gelcoat, marine paints, metals and plastic.
Metal Restorer & Polish Paste, 18 Oz. - 9019 - 71-09019F1
Designed to restore and polish stainless steel, brass, bronze, copper, chrome, aluminum and other marine metals. Restores luster.
Metal Finishing Pad - 7414 - 71-07414F1
Designed for removing light rust and cleaning and brightening metal. Made from a tough, non-woven synthetic material that won't rust or splinter like steel wool. 4-3/8" x 11".Sold in case pack of 10 only.
Med. Organic Vapor Respirator - 52P71 - 71-52P71F1
When properly fitted, helps provide respiratory protection from certain organic vapors and particulates at concentrations up to 10 times the permissible exposure limit (PEL). Do not use in environments that are immediately dangerous to life or health (IDLH). NIOSH approved against certain organic vapors and particulates. Use for a variety of applications including spray painting, pesticides, agriculture, construction and transportation.
Med Sanding Sponges 20/Box - 2606 - 71-02606F1
Provides flexibility and conformability to allow for sanding by hand in areas inaccessible to machine sanding. They feature aluminum oxide mineral coating on a foam pad with a waterproof bonding system. Can be used either wet or dry when sanding on wood, fiberglass/gelcoat, marine paints, metals and plastic.
Mask Paper Scotchblok 12" X750 - 6712 - 71-06712F1
This superior masking paper offers the ultimate penetration resistance from all solvents used in todays gelcoat and paint systems. This bonded fiber formation reduces contamination of freshly painted and varnished surfaces. Provides excellent conformability and holds up well under wet sanding conditions.
Marine Finesse-It™ Roloc Finishing Disc Pad - 14736 - 71-14736F1
Yellow pad is made with soft foam, Roloc™ button, and mushroom headed hooks. Use with 3 inch soft Roloc™ Disc Pad. Holds the Finesse-it™ Buffing Pad (red and white) firmly in place. Soft foam provides good conformability. Attaches to finesse-it roloc disc assembly (05540)
Low Mist Super 77 Spray Adhesive - 21210 - 71-21210F1
High-tack, high coverage, fast drying, transparent adhesive aerosol for permanently attaching foils, carpeting, foams, paper, cardboard, cloth, etc. to painted or unpainted metals, wood, hardboard, and other base materials. Two actuators for standard spray and wide spray pattern. High initial "grab" with sufficient open time to allow for positioning of materials. Reformulated to reduce VOC emissions.
Lightweight Body Filler -Quart - 5800 - 71-05800F1
Cures to a tack-free state in 15 to 20 minutes. This filler has a creamy texture, spreads smoothly, easy to sand and is vacuum processed to minimize pinholing.
Lightweight Body Filler - Gl - 5801 - 71-05801F1
Cures to a tack-free state in 15 to 20 minutes. This filler has a creamy texture, spreads smoothly, easy to sand and is vacuum processed to minimize pinholing.
Large Organic Vapor Respirator - 53P71 - 71-53P71F1
When properly fitted, helps provide respiratory protection from certain organic vapors and particulates at concentrations up to 10 times the permissible exposure limit (PEL). Do not use in environments that are immediately dangerous to life or health (IDLH). NIOSH approved against certain organic vapors and particulates. Use for a variety of applications including spray painting, pesticides, agriculture, construction and transportation.
Imperial™ Hand Glaze - 5990 - 71-05990F1
A non-silicone, non-wax hand glaze, with high filling characteristics, excellent depth of shine and superior luster. Recommended for use by hand to fill swirl marks after compounding acrylic lacquer, it may also be applied to completely cured enamels and urethane paints. Specially formulated to work on all colors, and can be painted over. Do not apply in direct sunlight or onto a hot surface.
Imperial Wetordry P800 Pkg/5 - 32035 - 71-32035F1
Used in wet sanding. Use for scuffing the blend area prior to painting. Most flexible backing with more consistent scratch pattern.
Imperial Wetordry P400 Pkg/5 - 32038 - 71-32038F1
Used in wet sanding. Use for scuffing the blend area prior to painting. Most flexible backing with more consistent scratch pattern.
Imperial Wet Or Dry™ Paper Sheets, 9" X 11" Grade P800 50/Pack - 2035 - 71-02035F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Wet Or Dry™ Paper Sheets, 9" X 11" Grade P600 50/Pack - 2036 - 71-02036F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Wet Or Dry™ Paper Sheets, 9" X 11" Grade P400 50/Pack - 2038 - 71-02038F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Wet Or Dry™ Paper Sheets, 9" X 11" Grade P320 50/Pack - 2040 - 71-02040F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Wet Or Dry™ Paper Sheets, 9" X 11" Grade P220 50/Pack - 2043 - 71-02043F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Wet Or Dry™ Paper Sheets, 9" X 11" Grade 1500 50/Pack - 2032 - 71-02032F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Wet Or Dry™ Paper Sheets, 9" X 11" Grade 1200 50/Pack - 2033 - 71-02033F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Wet Or Dry™ Paper Sheets, 9" X 11" Grade 1000 50/Pack - 2034 - 71-02034F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Wet Or Dry™ Paper Sheets, 5-1/2" X 9" Grade 2500 50/Pack - 7000028117 - 71-02045F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Wet Or Dry™ Paper Sheets, 5-1/2" X 9" Grade 2000 50/Pack - 2044 - 71-02044F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Wet Or Dry™ Paper Sheets, 5-1/2" X 9" Grade 1500 50/Pack - 2023 - 71-02023F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Wet Or Dry™ Paper Sheets, 5-1/2" X 9" Grade 1200 50/Pack - 2022 - 71-02022F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Wet Or Dry™ Paper Sheets, 5-1/2" X 9" Grade 1000 50/Pack - 2021 - 71-02021F1
Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints. Most flexible backing with more consistant scratch pattern make this 3Ms best wet sanding product.
Imperial Stikit 8 X 50/P120F - 21785 - 71-21785F1
Tough and durable aluminum oxide mineral bonded with heat resistant resin to a strong "F" weight backing. Excellent for scratch refinement after coarse sanding. Color is Gold.
Imperial Stikit 8 X 50/80F - 21787 - 71-21787F1
Tough and durable aluminum oxide mineral bonded with heat resistant resin to a strong "F" weight backing. Excellent for scratch refinement after coarse sanding. Color is Gold.
Imperial Stikit 6 X 100/80F - 21793 - 71-21793F1
Tough and durable aluminum oxide mineral bonded with heat resistant resin to a strong "F" weight backing. Excellent for scratch refinement after coarse sanding. Color is Gold.
Imperial Stikit 6 X 100/60F - 21794 - 71-21794F1
Tough and durable aluminum oxide mineral bonded with heat resistant resin to a strong "F" weight backing. Excellent for scratch refinement after coarse sanding. Color is Gold.
Imp W/D P220 Sandpaper 5/Pk - 32043 - 71-32043F1
Used in wet sanding. Use for scuffing the blend area prior to painting. Most flexible backing with more consistent scratch pattern.
Hookit™ Wool Polishing Pad - 5713 - 71-05713F1
Single sided, yellow wool polishing pad with hook and loop attachment. Designed for compounding, polishing and providing exceptional finishes on today's paint systems. Fits 7" Back-up pad # 05717
Hookit™ Wool Compounding Pad - 5711 - 71-05711F1
Single sided white wool pad with Hookit™ attachment. 2000 Max RPM. Fits 7" Back-up pad # 05717.
Hookit™ Soft Interface Pad - 5777 - 71-05777F1
Designed for 3M™ Hookit™ abrasives. Improves abrasive cut and finish. Reduces vibration on dual action random orbital sanders using 3M™ Hookit™ disc pads.
Hookit™ Sanding Block, 2-5/8" X 5-1/4" - 5686 - 71-05686F1
3M™ Hand Sanding Blocks help make sanding easier in difficult locations. You can use this with the 3M Purple Clean Sand sheet roll to efficiently complete your repair.
Hookit™ Sanding Block Kit - 5684 - 71-05684F1
Hookit™ foam sanding block kit contains the top seven most popular blocks packaged in a blister pack. Kit contains: PN#05685, 05686, 05687, 05689, 15691 and 05690 blocks.
Hookit™ Purple Finishing Film Discs, 50/Box - 30666 - 71-30666F1
The 3M™ Purple Finishing Film Hookit™ P2000 Grade Disc, is a long-lasting abrasive that produces fewer pigtails and a finer finish - It cuts similar in speed to a traditional 1500, but finishes at a 2000 grade scratch. Whether you scratch refine with 3M™ Trizact™ Discs or compound with 3M™ Perfect-It™ EX PN36060, the new 3M™ Purple Finishing Film Hookit™ P2000 Grade Disc helps save you time and money, Purple Finishing Film Hookit P2000 Grade Discs level orange peel, dust nibs or paint runs on all types of automotive paints. Appropriate for light sanding on refinish lacquer.
Hookit™ Purple Finishing Film Discs, 50/Box - 30566 - 71-30566F1
The 3M™ Purple Finishing Film Hookit™ P2000 Grade Disc, is a long-lasting abrasive that produces fewer pigtails and a finer finish - It cuts similar in speed to a traditional 1500, but finishes at a 2000 grade scratch. Whether you scratch refine with 3M™ Trizact™ Discs or compound with 3M™ Perfect-It™ EX PN36060, the new 3M™ Purple Finishing Film Hookit™ P2000 Grade Disc helps save you time and money, Purple Finishing Film Hookit P2000 Grade Discs level orange peel, dust nibs or paint runs on all types of automotive paints. Appropriate for light sanding on refinish lacquer.
Hookit™ Purple Dust-Free Finishing Film Discs, 50/Box - 30766 - 71-30766F1
The 3M™ Purple Finishing Film Hookit™ P2000 Grade Disc, is a long-lasting abrasive that produces fewer pigtails and a finer finish - It cuts similar in speed to a traditional 1500, but finishes at a 2000 grade scratch. Whether you scratch refine with 3M™ Trizact™ Discs or compound with 3M™ Perfect-It™ EX PN36060, the new 3M™ Purple Finishing Film Hookit™ P2000 Grade Disc helps save you time and money, Purple Finishing Film Hookit P2000 Grade Discs level orange peel, dust nibs or paint runs on all types of automotive paints. Appropriate for light sanding on refinish lacquer. Fewer PigtailsFiner Faster FinishLess Compounding
Hookit™ Hand File Board - 5744 - 71-05744F1
Firm plastic hand file board with easy release hook face. Use with Hookit™ abrasives sheets 2-3/4 inch x 16 inch for leveling of repair area. Has 3 handles. Provides true flat surface.
Hookit™ Foam Hand Sanding Pad - 5612 - 71-05612F1
Rectangular foam hand sanding pad. Use as an accessory item with 3M Hookit™ abrasive products for sanding filler, primer and other substrates.
Hookit™ Backup Pad - 5717 - 71-05717F1
Enables 3M™ Superbuff™ Compound Pad users to use the 3M™ Perfect-It™ Foam Polishing Pad without having to remove the 3M™ Superbuff™ Adaptor 05710 from the shaft of the polisher. Fits all standard 5/8 in shaft slow-speed polishers.
Highland™ Masking Tape - #2727 - 6541 - 71-06541F1
The unique balance of adhesive and backing provides a high degree of resistance to tearing or slivering on removal. This tape has excellent conformability and easy tear and can be used at bake temperatures up to 250°F (121°C) for one hour. Tape 2727 should not be subjected to outdoor exposure or prolonged periods of sunlight exposure because the tape may become very difficult to remove.
High Strength Repair Filler-Qt - 46013 - 71-46013F1
A two-component vinyl-ester filler formulated with short strand fiberglass for blister and other semistructural repairs. This high performance reinforced filler is designed to reduce water transmission and absorption into repaired areas, reducing the possibility of future osmotic blister damage. Hardener included.
High Strength Repair Filler-Gl - 46014 - 71-46014F1
A two-component vinyl-ester filler formulated with short strand fiberglass for blister and other semistructural repairs. This high performance reinforced filler is designed to reduce water transmission and absorption into repaired areas, reducing the possibility of future osmotic blister damage. Hardener included.
Green Corps™ 36518 Perfect It™ Foam Polishing Pad, 1/2" X 18", 80 Grit, 20/Box - 36518 - 71-36518F1
Sanding belt for spot weld and hem flange removal Aluminum oxide minerals deliver a fast cut rateAbrasive belt made for increased durability and long-lasting serviceResin bonded for heat resistanceFor use with quality file belt sanders
Green Corps™ 36517 Perfect It™ Foam Polishing Pad, 1/2" X 18", 60 Grit, 20/Box - 36517 - 71-36517F1
Sanding belt for spot weld and hem flange removal Aluminum oxide minerals deliver a fast cut rateAbrasive belt made for increased durability and long-lasting serviceResin bonded for heat resistanceFor use with quality file belt sanders
Green Corps™ 36516 Perfect It™ Foam Polishing Pad, 1/2" X 18", 40 Grit, 20/Box - 36516 - 71-36516F1
Sanding belt for spot weld and hem flange removal Aluminum oxide minerals deliver a fast cut rateAbrasive belt made for increased durability and long-lasting serviceResin bonded for heat resistanceFor use with quality file belt sanders
Gn Cps Stk Disc. 8" 40E Pkg - 31550 - 71-31550F1
More durable and longer lasting discs. Pressure-sensitive backing for easy application.
General Trim Adhesive - 8088 - 71-08088F1
Low VOC, clear, high strength adhesive for bonding automotive materials such as carpeting, jute pads, fabrics and plastics to metal and other surfaces. High heat resistance. Lace spray pattern and controlled spray width. Good soak in control, minimizing possibility of bleed through.
General Purpose Scuffing Discs - 7467 - 71-07467F1
Constructed of a durable, three dimensional, non-woven Scotch-Brite web. Designed for use on a random orbital sander. Attaches to 3M™ Hookit™ Disc Pad 05776. Color: Maroon.
G.P. Masking Tape 1 1/2 X 60Yd - 5619 - 71-05619F1
This tape can be removed cleanly for up to 3 days. It is a medium-high adhesion tape that is ideal for use on previously painted or varnished surfaces.
Foam Ultrafine Polishing Pad - 5733 - 71-05733F1
Single sided blue foam pad provides high gloss shine and helps eliminate swirl marks on painted surfaces, even on difficult dark colors. For attachment to Hookit pads.
Foam Polishing Pad, 3" - 5726 - 71-05726F1
High Performance 3" single sided foam polishing pad designed to be used with 3M™ machine polishes. Use with Hookit™ 3" pad, 20427. The Perfect-It brand means this is 3M's highest-performing single-sided 3" foam polishing pad.
Finesse-It™ Finishing Material Easy Clean Up - 13084 - 71-13084F1
Specially designed compounds and polishes to be used on OEM and baked refinish paints to remove sand scratches or to remove swirl marks from previously compounded areas.
Finesse-It Marine Paste Compound - 6039 - 71-06039F1
Well suited for boat reconditioning of heavily oxidized surfaces/finishes and removing P800 sand scratches on production gelcoat and grade 1000 or 1200 sand scratches on tooling gelcoat.White color reduces the potential for staining of light-colored boats. Has long-working time, requiring less compound to be used per application.
Fine Sanding Sponges 20/Box - 2604 - 71-02604F1
Provides flexibility and conformability to allow for sanding by hand in areas inaccessible to machine sanding. They feature aluminum oxide mineral coating on a foam pad with a waterproof bonding system. Can be used either wet or dry when sanding on wood, fiberglass/gelcoat, marine paints, metals and plastic.
Fastbond™ Contact Adhesive - 20272 - 71-20272F1
Air drying neutral-colored contact adhesive used for bonding decorative laminates, aluminum, steel, wallboard, plywood, panels, wood and other materials. Bonds immediately and permanently eliminating the need for clamping. Brushable or rollable.
Dual Lock Reclosable Fastener - 6463 - 71-06463F1
Consists of two types of continuous plastic strips with mushroom shaped stems. Designed to lock together to provide reclosable fastening for a wide range of applications. UV and plasticizer resistant. Very high bond Scotch adhesive. Withstands heat up to 200'F. Clear. Two rolls 1" wide, one roll each of both sides.
Dry Guide Coat Refill, 50G - 5860 - 71-05860F1
Identifies surface imperfections such as pinholes and deep scratches in primer. Requires no masking and there is no dry time involved. Can be used for both wet and dry sanding. Contains no solvents. When sanding polyester filler, it ensures the filler is flat (no ripples) and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating.
Dry Guide Coat Cartridge & Kit - 5861 - 71-05861F1
A method for identifying surface imperfections such as pinholes and deep scratches in primer. Requires no masking and there is no dry time involved. Can be used for both wet and dry sanding. Contains no solvents. Kit contains an applicator pad. Used in the 3M™ Dry Primer Sanding System. When sanding polyester filler, it ensures the filler is flat (no ripples) and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating.
Double Sided Wool Compound Pad - 33280 - 71-33280F1
Economical 100% wool pad. Provides excellent cut and finish on all composite surfaces.
Doodlebug Pad Holder Kit - 6472 - 71-6472F1
Swivel head holder for doodlebug pads. Most commonly used with 1-1/8" by 5' wooden garage handle (not included). Kit includes: 1 pad holder, 1 brown coarse pad and 1 white fine pad.
Cubitron™ Ii File Belt - 33446 - 71-33446F1
A great alternative to spot weld drilling and metal grinding applications. Provides a very fast cut, improved control and is ideal for hard to reach spots. Contains 3M™ precision-shaped abrasive grain, coated on a heavy duty backing. Resin bonded for heat resistance. Coated with a dry grinding aid to help reduce heat build up. 3M™ precision shaped ceramic grain continuously fractures into sharp points that cut exceptionally fast, helping increase productivityPrecision shaped ceramic grain is engineered to run cooler, reducing metal discoloration/oxidation and the chance of heat related stress cracksCoated with a dry grinding aid to further enhance the product's ability to run cooler and cut faster
Cubitron™ Ii File Belt - 33443 - 71-33443F1
A great alternative to spot weld drilling and metal grinding applications. Provides a very fast cut, improved control and is ideal for hard to reach spots. Contains 3M™ precision-shaped abrasive grain, coated on a heavy duty backing. Resin bonded for heat resistance. Coated with a dry grinding aid to help reduce heat build up. 3M™ precision shaped ceramic grain continuously fractures into sharp points that cut exceptionally fast, helping increase productivityPrecision shaped ceramic grain is engineered to run cooler, reducing metal discoloration/oxidation and the chance of heat related stress cracksCoated with a dry grinding aid to further enhance the product's ability to run cooler and cut faster
Cubitron™ Ii Cut-Off Wheel - 33456 - 71-33456F1
This premium cut-off wheel contains precision shaped grain for ultra fast cool cutting action and long life. Auto body technicians are impressed by the outstanding cutting performance on both mild steel and ultra high strength steel. Must be used with ansi-approved flanges for type 1 cut-off wheels and a wheel guard that fits the size of the cut-off wheel. Maximum operating speed 25,000 RPM. 3M™ Cubitron™ II cut-off wheels with precision-shaped grain are engineered to cut faster than competitive ceramic products, offering significant productivity gainsTriangular shaped ceramic grain wears evenly, runs cool, and optimizes mineral breakdown, for extra long lifeRigid, reinforced resin-bonded wheel slices through almost all automotive materials including mild steel and ultra high strength steelWheel must have a maximum operating speed greater than or equal to the maximum speed of the power tool used
Crème Hardener - Blue - 5766 - 71-05766F1
Hardening agent designed to be used with Zebra tack-free lightweight body filler, Lightweight body filler, Piranha putty, Marine high strength repair filler, or Marine premium filler. Its creamy consistency mixes easily and quickly with any of the above products.
Clean Sanding Hookit™ Discs 236U - 55598 - 71-55598F1
An aluminum oxide Hookit™ disc with precise hole design for improved dust extraction constructed on a C weight, intermediate paper backing. CW Array Hole Pattern.
Clean Sanding Hookit™ Discs 236U - 55514 - 71-55514F1
An aluminum oxide Hookit™ disc with precise hole design for improved dust extraction constructed on a C weight, intermediate paper backing. CW Array Hole Pattern.
Clean Sanding Hookit™ Discs 236U - 55513 - 71-55513F1
An aluminum oxide Hookit™ disc with precise hole design for improved dust extraction constructed on a C weight, intermediate paper backing. CW Array Hole Pattern.
Clean Sanding Hookit™ Discs 236U - 55511 - 71-55511F1
An aluminum oxide Hookit™ disc with precise hole design for improved dust extraction constructed on a C weight, intermediate paper backing. CW Array Hole Pattern.
Clean Sanding Hookit™ Discs 236U - 55509 - 71-55509F1
An aluminum oxide Hookit™ disc with precise hole design for improved dust extraction constructed on a C weight, intermediate paper backing. CW Array Hole Pattern.
Clean Sanding Hookit™ Discs 236U - 55508 - 71-55508F1
An aluminum oxide Hookit™ disc with precise hole design for improved dust extraction constructed on a C weight, intermediate paper backing. CW Array Hole Pattern.
Clean Sanding Hookit™ Discs 236U - 55506 - 71-55506F1
An aluminum oxide Hookit™ disc with precise hole design for improved dust extraction constructed on a C weight, intermediate paper backing. CW Array Hole Pattern.
Clean Sanding 3" Hookit™ Disc Pad Kit - 20427 - 71-20427F1
Dust extraction back up pad constructed on foam material. Designed for use with Clean Sanding Hookit™ discs. Includes 5 adaptors: 1/4-20 Ext x 5/16-24 Ext, 1/4-20 INT x 5/16-24 Ext, 1/4-28 Ext x 5/16-24 Ext, 5/16-24 Ext x 5/16-24 Ext, 5/16-24 Ext x 6mm-1.0 Ext
Citrus Base Cleaner, 24 Oz. - 76394 - 71-76394F1
Aerosol cleaner which can dissolve and flush away dirt, grease, tar, most non-curing type adhesive films, and similar substances. It is a citrus oil based cleaner that emulsifies when flushed with water. It contains no petroleum distillates. Can be used to clean and degrease metal parts, motors, tools, printing presses, concrete, or almost any dirty or greasy surface. Not for sale or use in California.
Citrus Adhesive Remover, 24 Oz. - 49048 - 71-49048F1
Multi-purpose aerosol or bulk cleaner effective in removing many partially dried and some types of fully cured adhesives without leaving a residue.
Cartridge Applicator Gun - 8992 - 71-08992F1
For use with adhesive, sealants and glazing compound cartridges.
