Attwood Marine
Complete Trailer Wiring Kit - 2089736 - 23-76217F1
(1) Receptical and harness, 4 ft. (1.2 m) (1) Plug and harness, 25 ft. (7.6m)
Coupler Security Lock - 12044-6 - 23-120446F1
One piece. For maintenance-free trailer security. Solid brass with rustproof stainless steel shackle pin. Includes two keys. Shank length: 5/8" x 1/4" diameter.
Deluxe Deck Brush Kit - 11807-2 - 23-118072F1
Kit includes: Soft brush with squeegee end for gentle, scratch-free cleaningTelescoping aluminum pole with flow-through design has water on/off switch and comfortable foam gripsNylon boat hook attachmentNylon boat hook attachment
Economy Rod Holder-Black 2/Pk - Rh-4646 - 23-Rh4646F1
Features fixed vertical angle to optimize rod positioning. Smaller size is perfect for medium and light action gear. Rod throat opening fits most standard and ultra-light rods up to 1-3/16" diameter. Locking ring fits spinning reel handle shanks up to 7/16" diameter.
Fuel Demand Valve - 9300Fdv7 - 23-9300Fdv7F1
Fuel Demand Valve Prevents engine flooding due to new pressurized fuel systems and eliminates fuel spray when connecting or disconnecting fittings at the engine. Prevents fuel spill and engine damage associated with pressurized fuel. Compatible with ethanol fuel.
Fuel Hose Fitting 1/4" Merc - 2546990 - 23-88736F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Fuel Kit Mercury 6'X3/8 Usc - 93806Mus7 - 23-93806Mus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Fuel Kit Omc 6'X3/8 Usc - 93806Eus7 - 23-93806Eus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Fuel Kit Univ 6'X3/8 Usc - 93806Uus7 - 23-93806Uus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Fuel Kit Yamaha 6'X3/8 Usc - 93806Yus7 - 23-93806Yus7F1
EPA COMPLIANTFuel kit with multi-layer primer bulb and universal sprayless connector. Ethanol compatible. EPA certified compliant hose. Attwood universal sprayless connector prevents fuel spray when connecting or disconnecting fuel line from the fuel tank. Includes male 1/4" NPT tank connector for use with all marine fuel tanks. Multi-layer primer bulb prevents evaporation of fuel, saving gas and money. The universal sprayless connector now comes with pre-applied thread sealant.
Fuel Tank Fitting 1/4" Je/Omc - 2550642 - 23-88836F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Fuel Tank Fitting Yamaha 1/4" - 2555756 - 23-88976F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Gear Lube Pump - 11891D7 - 23-11891D7F1
The pump fits any outboard or sterndrive and includes one Yamaha® adapter.
Gimballed Drink Holder Mug Size - 11672-4 - 23-116724F1
Formed, chrome-plated steel wire drink holders are ideal for boats, cars, and RVs. Gimbaled surface-mounting bracket keeps drinks level to prevent spills. Includes mounting screws.
Group 24 Battery Holder - 2626947 - 23-90925F1
A simple-to-install battery tray that fits into a limited space. For batteries up to 10-1/2" in height. Provides simple installation for changing or replacing batteries. The polypropylene hold-down strap has a positive locking, quick disconnect buckle. Molded base mounts with four #10 panhead screws.
Group 27 Battery Holder - 2627312 - 23-90935F1
A simple-to-install battery tray that fits into a limited space. For batteries up to 10-1/2" in height. Provides simple installation for changing or replacing batteries. The polypropylene hold-down strap has a positive locking, quick disconnect buckle. Molded base mounts with four #10 panhead screws.
Hollow Base Cleat 6 (1 Pair) - 1587132 - 23-62456F1
The clean lines and modern look of these cleats are in tune with styling of today's boats. Enhanced 316 Stainless Steel construction.
In-Line Fuel Splice Kit - 11822-6 - 23-118226F1
Kit includes brass hose mender and 2 stainless steel hose clamps. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Kayak Roof Carrier - J Style - 11441-4 - 23-114414F1
Easy to install kayak carrier mounts on most standard roof racks. J-style open design allows for easy loading and unloading of kayaks. Durable powder-coated steel construction holds up to 120 lbs. Foam rubber protection pads and detailed instructions included.
Ladder 3-Step Semi-Auto Oem For Boat Builders Only - 19902-36 - 23-1990236F1
Led 3" Oval Spot/Underwater Light - 6343Ss7 - 23-6343Ss7F1
These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12 VDC systems. 1.5 watts at 12 VDC. Aside from efficiency and performance, Attwood's underwater light is unmatched in ease of installation. Today's underwater lighting products are extremely heavy, require a large thru-hull cut below the water line and involve several additional steps for installation. With only a small hole for wiring and 2 screws for attachment, Attwood's LED surface mount design makes installation as quick and effortless as possible. Backed by a 10-year warranty, Attwood's LED underwater light is designed with the most extreme conditions in mind. Attwood uses only the highest grade stainless components to ensure the product will be resistant to corrosion. To ensure the light is watertight, all electrical components are fully sealed with a proprietary potting compound. These features translate into a lighting product that the customer will likely never have to replace or service as long as they own their boat!
Led Micro Lights, Blue - 6350B7 - 23-6350B7F1
Extremely compact, just 1.63" long. With electro-polished 316 Stainless covers and fully sealed electronics. Perfect for step, accent, and courtesy lighting; the Micro Light can be used in rod storage boxes without risk of water damage, under hardtops, or even mounted to rails! .75 watts at 12 VDC. Comes with both horizontal and vertical bezels.10-year warranty.
Led Micro Lights, White - 6350W7 - 23-6350W7F1
Extremely compact, just 1.63" long. With electro-polished 316 Stainless covers and fully sealed electronics. Perfect for step, accent, and courtesy lighting; the Micro Light can be used in rod storage boxes without risk of water damage, under hardtops, or even mounted to rails! .75 watts at 12 VDC. Comes with both horizontal and vertical bezels.10-year warranty.
Lift 'N' Lock Anchor Control - 13700-7 - 23-137007F1
Supports anchors up to 20 lbs. with 1/4" to 1/2" dia. line. Controls anchor from any position. Zinc-plated steel.
Louver Vent Stainless Steel - 1488-5 - 23-14885F1
All-welded 304 stainless steel construction with polished finish. Adapts to 3" or 4" ventilation systems. Predrilled with six mounting holes to accommodate #8 screws. Dimensions: 11-5/16" L x 4-3/8" H x 3/4" D
Louver Vent Venturi/White/Bulk - 1494F1 - 23-1494F1F1
A clean, contemporary, louver designed vent. Corrosion-resistant paintable ABS plastic. Install with #8 fasteners. For use with collector boxes 13411 for 3" systems. Sized for installation even on highly contoured decks. Dimensions: 17-9/16" L x 2-3/4" H x 11/16" D
Mercfemale Tankfitting Lp - 8890Lp6 - 23-8890Lp6F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Oil To Gas Mixing Container - 11873-1 - 23-118731F1
Allows the addition of the exact amount of oil required for a 2-cycle engine Oil level marks are in gallons and liters
Omc Female Tankfitting Lp - 8889Lp6 - 23-8889Lp6F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP = Low Permeation
Oval 2-Pin Base For Angled Pole - 91022-7 - 23-910227F1
A Plug-In Base for Angled Locking Collar Poles. This tough, resilient 2-pin base is used for angled pole lights with locking collars. Ideal for installation in close quarters, such as narrow gunwales or deck areas. Narrow base has a soft rubber cover with a gasket to seal the socket. Contacts are nickel-plated to resist corrosion and multi-crimped for durability. Wire leads are tinned for corrosion-resistance. Base fits these pole lights. Frosted Globe: 5110 Series w/locking collar pole; Anti-glare: 5310, 5330, 5340 Series; Pulsar Bi-Color 5091-10-7 pole.
Pole Light Storage Clips - 7571L7 - 23-75717F1
New design holds larger dia. anti-glare pole lights. Resilient plastic clip holds standard 3/4" dia. poles. Ideal for storing and protecting plug-in pole lights. 2" L x 1-1/2" H. One hole for #8 screws.
Primer Bulb Low-Perm 3/8 - 93038Lp7 - 23-93038Lp7F1
EPA COMPLIANT / CARB CERTIFIED.Multi layer bulb designed for high performance priming in the harsh marine environment. Multi-layer design prevents over-pressure bursting and vacuum collapse preventing proper fuel flow. Low permeation bulb prevents fuel evaporation saving gas and money. High performance check valves for quick priming and unrestricted flow ensuring proper engine performance and minimizing engine wear. Bulb is firm but not stiff like other newer EPA/CARB compliant primer bulbs.
Primer Bulb Low-Perm 5/16 - 93516Lp7 - 23-93516Lp7F1
EPA COMPLIANT / CARB CERTIFIED.Multi layer bulb designed for high performance priming in the harsh marine environment. Multi-layer design prevents over-pressure bursting and vacuum collapse preventing proper fuel flow. Low permeation bulb prevents fuel evaporation saving gas and money. High performance check valves for quick priming and unrestricted flow ensuring proper engine performance and minimizing engine wear. Bulb is firm but not stiff like other newer EPA/CARB compliant primer bulbs.
Rectangular 2-Pin Chrome Zamak Base, Bulk - 911339-1 - 23-9113391F1
Die-cast ZAMAK with chrome finish. 2-pin base for 12 degree angled pole. Swivel cover protects the socket. Includes 7-1/2" wire leads for connection to 12 VDC power supply. Dimensions: 4" x 1-5/8". Can also be used with locking-collar series when locking collar is removed.
Rectangular 2-Pin Chrome Zamak Base, Packaged - 911339-7 - 23-9113397F1
Die-cast ZAMAK with chrome finish. 2-pin base for 12 degree angled pole. Swivel cover protects the socket. Includes 7-1/2" wire leads for connection to 12 VDC power supply. Dimensions: 4" x 1-5/8". Can also be used with locking-collar series when locking collar is removed.
Replacement Bolt For Battery Tray - 911352 - 23-911352F1
Replacement bolt for battery tray.
Rod Holder Extension - 1138157 - 23-50163F1
Increase your odds with easier access to your rod and reel. Extends the height of the rod holder by 6", allowing for faster access when that fish strikes. Made from super tough glass filled nylon. Works with Attwood post mount rod holders.
S3 Digital Bilge Switch 12V - 1059752 - 23-48017F1
The S3 uses a proprietary electronic sensing technology and is engineered to operate in any bilge water mixture without failure and reduce continuous cycling. Fully sealed electronics are protected from water or chemical damage. It can be mounted on the floor of the bilge or directly to a stringer. Compatible with all competitive products with no moving parts. 5-Year warranty. 2.73" H x 3.16" W x 1.68" D.
