Dock Edge
50' Dock Guard Edge - De1009F - 686-1009Ff1
Marine grade flexible white PVC, will not chip or crack under normal usage and is unaffected by gas, oil or saltwater. UV stabilizers prevent yellowing and deterioration. Stainless steel fasteners recommended, sold separately. Unique design allows mounting to suit any application. Mount flat on dock for traditional use, as a heavy-duty double wall fender, and as a corner protector. Can be used on pilings or on docks manufactured from 1 or 2" boards with no side trim. Mounts easily over the edge of deck boards. Prevent boat damage during docking.
Corner Bumper Grey - De1057Gf - 686-1057Gf Superseded By: 686-De1057Gff1
Heavy duty air-filled bumper is constructed from marine grade PVC and features a built-in air valve for inflation or deflation if necessary. Includes UV inhibitors and fungicide.
Dock Edge 1002F Air Cushion™ Double "D" Profile, White, 8' - De1002F - 686-1002Ff1
Provides double the protection with two air-filled channels. Uses small corners, end plugs and connectors. Easily installed horizontally or vertically on any dock or boat house. Requires 2 End Plugs or Connectors for each joint. 1-1/2" Protrusion x 5" Overall height.
Dock Edge 1004F Air Cushion™ Single "D" Profile, White, 8', 10/Pk - De1004F - 686-1004Ff1
Ensures peace of mind for any runabout or personal watercraft owner. Install on any horizontal or vertical surface. 1-1/2" Protrusion x 3-1/8" Overall height.
Dock Edge 1005F Boat Saver 24" White (Includes Screws) - De1005F - 686-1005F Superseded By: 686-De1005Ff1
Developed specifically for AIR CUSHION™ spot protection. Like having a fender mounted where its needed the most. Mount vertically or horizontally on docks or boat houses. Molded in UV inhibitors and fungicides. Combine with other Dock Edge Profiles for total protection. Stainless steel mounting screws included.
Dock Edge 1026F Large Air Cushion™ End Plugs, White, 2/Pk - De1026F - 686-1026Ff1
Seal Air Cushion Profile ends. Use with DockEdge+ Connectors, Corners and PVC solvent for Air Cushion System.
Dock Edge 1027F Small Air Cushion™ End Plugs, White, 4/Pk - De1027F - 686-1027Ff1
Seal Air Cushion Profile ends. Use with DockEdge+ Connectors, Corners and PVC solvent for Air Cushion System.
Dock Edge 1028F Large Air Cushion™ Connectors, White, 2/Pk - De1028F - 686-1028Ff1
Connect Air Cushion™ profiles. Use wth DockEdge+ End Plugs, Corners and PVC solvent for Air Cushion System.
Dock Edge 1048F Large Air Cushion™ Corners, White, 2/Pk - De1048F - 686-1048Ff1
Connect Air Cushion Profiles at any outside 90° angle corner. Use with DockEdge+ Connectors, End Plugs and PVC solvent for Air Cushion System.
Dock Edge 1048Nf Large Air Cushion™ Corners, Navy, 2/Pk - De1048Nf - 686-1048Nff1
Connect Air Cushion Profiles at any outside 90° angle corner. Use with DockEdge+ Connectors, End Plugs and PVC solvent for Air Cushion System.
Dock Edge 1051F Pvc Solvent, 4 Oz. - De1051F - 686-1051Ff1
Ideal for cementing all corners, end plugs and connectors to Air Cushion profiles to create the Air Cushion system. May be subject to shipping restrictions.
Dock Edge 1052F Large Air Cushion™ Outside Corner, White - De1052F - 686-1052Ff1
For use with Single "P" profiles only. Use with DockEdge+ Connectors, End Plugs and PVC solvent for Air Cushion System.
Dock Edge 1104F Full Face Profile Dock Bumper, 8', White, 3/Pk - De1104F - 686-1104Ff1
Heavy-duty. Ideal for larger applications. Double internal channels with cross girder adds additional protection. Easy to install. 4-1/2" Overall height. Highly durable double internal channels and cross girder extrusionProtects against heavy impacts and provides a large contact areaUV Inhibitors and Fungicides prevent fading, yellowing, deterioration from sunlight and unsightly blotchingUnaffected by oil, gas or saltwater3 x 8' Sections totaling 24', with a mounting line, easy to mount
Dock Edge 1106F Slant "P" Profile, 8', White, 3/Pk - De1106F - 686-1106Ff1
Slant "P" Dock Bumper Profile is extruded with flexible PVC material that is excellent for use on all docks. 3 x 8' sections totaling 24', with a mounting line, easy to mount. Slanted face is designed to prevent hanging boat fenders from getting caught underneath the profile in rough watersPerfect for small boats and PWCPVC material with UV and fungicides
Dock Edge 1118F Small "P" Profile, 8', Black, 3/Pk - De1118F - 686-1118Ff1
Extruded with flexible PVC material, designed to be used to trap air and act as an air cushion. Excellent for use on all docks. 3 x 8' sections totaling 24', easy to mount. 1-1/2" Protrusion (2-1/4" Overall w/top tab) x 2-5/8" overall height. Perfect for small outboards or personal watercraftContains molded-in UV inhibitors and fungicidesWill retain resiliency and brilliance for yearsUnaffected by oil, gas or saltwaterInstalls in minutes
Dock Edge 1132F "C" Guard Economy Dock Bumper White - De1132F - 686-1132F Superseded By: 686-De1132Ff1
Economy "C" Shape co-extruded profile is made of marine grade PVC with UV inhibitors to exacting standards. It will not crack or distort with temperature extremes. It can be used on flat surfaces as well as on pilings.
Dock Edge 1133F "C" Guard Economy Dock Bumper, 6' White, 4/Case - De1133F - 686-1133Ff1
Economy "C" Shape co-extruded profile is made of marine grade PVC with UV inhibitors to exacting standards. It will not crack or distort with temperature extremes. It can be used on flat surfaces as well as on pilings. Includes 4ea 6' lengths.
Dock Edge 1134F Economy Dock Guard Profile, 6' White, 4/Case - De1134F - 686-1134Ff1
The economy Dock Guard co-extruded profile can be used in light to medium duty applications. It features a raised lip for gunwale protection on ski and bass boats.
Dock Edge 1153F Small Dockushion, 48", White - De1153 - 686-1153Ff1
The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.
Dock Edge 1154F Small Dockorner, 5-1/2", White - De1154F - 686-1154Ff1
The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.
Dock Edge 1155F Small Dockap, 1-1/4", White - De1155F - 686-1155Ff1
The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.
Dock Edge 1160F Full Face Profile, White, 16' Roll - De1160F - 686-1160F Superseded By: 686-De1160Ff1
Heavy-duty. Ideal for larger applications. Double internal channels with cross girder adds additional protection. Easy to install. 4-1/2" Overall height. Highly durable double internal channels and cross girder extrusionProtects against heavy impacts and provides a large contact areaUV Inhibitors and Fungicides prevent fading, yellowing, deterioration from sunlight and unsightly blotchingUnaffected by oil, gas or saltwater
Dock Edge 2184F Stand Off Roto Dock Ladder 4 Step, Sand - De2184F - 686-De2184Ff1
Tough and durable, this roto-molded ladder swings up and out of the way, locking in place when not in use. The Stand Off roto-molded ladder extends into the water at a 60 degree angle to make getting out of the water easier. Will not corrode with exposure and will not fade or crack. Molded-in U.V. inhibitors and fungicides. 20-1/2" Gable Height19-1/2" Gable Depth4" D x 14" W Tread12-1/2" To First Step10-1/2" Between Treads
Dock Edge 2306F Dock Cleat Open Base High Density Polyethylene, 6" - De2306F - 686-2306Ff1
Injection molded high density polyethylene and U.V. stabilized.
Dock Edge 2308F Dock Cleat Open Base High Density Polyethylene, 8" - De2308F - 686-2308Ff1
Injection molded high density polyethylene and U.V. stabilized.
Dock Edge 2413F "S" Dock Cleat Aluminum, Matte, 13" - De2413F - 686-2413Ff1
Sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an enlarged counter-sunk hole for easy installation with a socket. Can be through bolted or lag bolted.
Dock Edge 2504Wf Classic Dock Cleat, 4-1/2" White Powder Coated Almag - De2504Wf - 686-2504Wff1
Cast from Almag and powder coated to last. Distinctive and highly functional, they are available to suit any requirement.
Dock Edge 2812F Cast Iron Dock Cleat, Galvanized, 12" - De2812F - 686-De2812Ff1
Traditional hot-dip galvanized dock cleats. Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while securing the cleat to a surface.
Dock Edge 2814F Cast Iron Dock Cleat, Galvanized, 14" - De2814F - 686-De2814Ff1
Traditional hot-dip galvanized dock cleats. Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while securing the cleat to a surface.
Dock Edge 59166F Dolphin™ Twin Eye Ribbed Fenders, Black, 4-1/2" X 16" - De59166F - 686-59166Ff1
Featuring specially reinforced heavy-duty integral lugs for added strength and longer durability. These fenders provide maximum protection and value for your dollar.
Dock Edge 73100F 10" Dock Corner, White - De73103F - 686-73103Ff1
Bumpers are manufactured from roto-molded marine grade PVC with UV inhibitors and fungicides. Will not chip or fade and features molded in ribs for strength and angled ends to deflect craft. Provides excellent gunnel protection for bass & ski boats.
Dock Edge 73100F Dock Bumper Kit, White W/ 1Ea Corner And 2Ea Straight Bumpers - De73100F - 686-73100Ff1
Bumpers are manufactured from roto-molded marine grade PVC with UV inhibitors and fungicides. Will not chip or fade and features molded in ribs for strength and angled ends to deflect craft. Provides excellent gunnel protection for bass & ski boats. Kit includes 2ea 17" straight bumpers and 1ea 10" x 10" corner bumper.
Dock Edge 85-205-F Floating Connector Hinge Kit - De85205F - 686-85205Ff1
Includes all mounting hardware required to securely attach Dock 2 Go modular dock sections together. Kit includes 2 Male T connectors, 2 Female T connectors, 2 connector Pins and 4 Backer Plates. 4 Gauge (1/4" nominal) hot dip galvanized steel with 9/16" hole punches on 3-1/2" centers except where indicated. Requires 32 x 2-1/2" x 1/2" carriage bolts, lock washer and nuts.
Dock Edge 85-210-F Floating Dock Inside Corner Kit - De85210F - 686-85210Ff1
For floating dock applications where an outside corner is not necessary. Includes 4 heavy duty inside corners and 4 backer plates. Requires 32 x 2-1/2" x 1/2" carriage bolts, lock washer and nuts (not included).
Dock Edge 85-225-F Stationary Dock Inside Corner Kit - De85225F - 686-85225Ff1
For stationary dock applications where an outside corner is not necessary. Includes 4 heavy duty inside corners and 4 backer plates. Requires 32 x 2-1/2" x 3/8" carriage bolts, lock washer and nuts (not included).
Dock Edge 85-230-F Stationary Side Leg Holder Kit - De85230F - 686-85230Ff1
Securely mount side legs to the inside or outside of the dock frame without deforming wood causing bolt loosening and dock shifting. Kit includes 2 side leg holders and 4 backer plates. 11 Gauge 1/8" (nominal) hot dip galvanized steel with 7/16" holes for 3/8" carriage bolts. Requires 8 x 2-1/2" x 3/8" carriage bolts, lock washer and nuts (not included).
Dock Edge 85-320-F Hybrid Aluminum Dock Kit 4' X 8' - De85320F - 686-85320Ff1
Designed and engineered for safety and stabilityTIG welded aluminum frame (alloy 6005/6061)Aluminum hardwareGalvanized steel posts 1-11/16" (42.9mm) diameterProtective post capsStainless steel (304) nuts and boltsExpandable, just add sections as desired or neededRustproof and corrosion resistant
Dock Edge 85-322-F Hybrid Aluminum Dock Connector - De85322F - 686-85322Ff1
Used to connect Hybrid Dock Kit sections together Strong aluminum constructionRubber insert to alleviate hinge noiseEasily installs on aluminum frame
Dock Edge 86102F Base Plate For Stationary Docks - De86102F - 686-86102Ff1
Used as a footing. May be bolted to a 2" x 6" piece of lumber and joined to an adjacent base plate for stability.
Dock Edge 86103F Connector Hinge For Stationary Docks - De86103F - 686-86103Ff1
Used to join dock sections or a fixed ramp to the dock at varying angles. Includes hinge pin.
Dock Edge 90-815-F 36" W X 48"H Sup/Kayak Rack - De90815F - 686-90815Ff1
32" wide support arms fits 2 kayaks, canoes, pdl, surf boards, etc. Adjustable locking straps, with locking hook at one endSupports many times the weight of an average kayak2' spacing lower rackTop rack open to accommodate any heightRobust powder coated metal square tubing combined with thick metal fabrications & MIG welded for strengthUniversal mount is easy to assemble and take downRemovable bolt detaches assembly for quick storagePowder coated popular grey Hammertone
Dock Edge 90027F Mooring Buoy, Bright Orange, 24" X 8" - De90027F - 686-90027Ff1
Polyethylene and filled with closed cellular foam for long life under the most extreme marine conditions. Resistant to fire, oil and gas. Molded in UV Inhibitors and Fungicides.
Dock Edge 91-112-F Connector Hinge, Heavy Duty, Galvanized - De91112F - 686-91112Ff1
All DockEdge heavy duty floating dock hardware is 5 gauge (1/4" nominal). Hot dip galvanized steel with 9/16" hole. Engineered for use with Howell™ and DockEdge dock floats.
Dock Edge 91111F Plastic Leg Caps For Stationary Docks, 4/Pk - De91111F - 686-91111Ff1
Use to cover raw leg pipe edges. Gives dock the finishing touch. 4-Pack.
Dock Edge 91116F Anchor Tie Down Corner For Stationary Docks - De91116F - 686-91116Ff1
Used to help secure the dock in place. May also replace Corner Plate when extra strength is required.
Dock Edge 91603F Boat Cover Bow, 3', 2/Pk - De91603F - 686-91603Ff1
Made of heavy duty fiberglass, these strong flexible bows will hold up even the heaviest boat covers and prevent pools of water from forming. Easy to cut if a custom fit is desired. 2-Piece slats are 1-13/16" wide and include a stainless steel connector.
Dock Edge 91604F Boat Cover Bow, 4', 2/Pk - De91604F - 686-91604Ff1
Made of heavy duty fiberglass, these strong flexible bows will hold up even the heaviest boat covers and prevent pools of water from forming. Easy to cut if a custom fit is desired. 2-Piece slats are 1-13/16" wide and include a stainless steel connector.
Dock Edge 92104F Inside Corner For Floating Docks - De92104F - 686-92104Ff1
For lighter duty applications where an outside corner is not necessary.
Dock Edge 92116F Inside Anchor Corner For Floating Docks - De92116F - 686-92116Ff1
Use as inside corner. Adds extra strength with its' anchor chain bar. Accepts chain up to 1/2".
Dock Edge 94-102-F Bottom Pad, Galvanized - De94102F - 686-94102Ff1
All stationary dock hardware is 1/8" hot-dip galvanized steel.7/16" holes for 3/8" carriage bolts.All bolts included are stainless steel. Bottom Pad: Large surface area is used in soft bottom areas. Leg pipe can extend through the pad into lake bottom for extra lateral support. The pointed corners also grab when the bottom is rocky. Height of pipe above pad: 2-3/8" Height of pipe below pad: 1-1/2".
Dock Edge 96-282F Solar Piling Dome Light - 96282F - 686-96282Ff1
Ideal for docks, decks, walkways & driveway or slip entriesDesigned for salt or fresh water useUp to 12 hour run timeBright white LED with 360° illuminationPowerful solar charging performanceInstalls easily - no wiresDurable, weatherproofReplaceable, rechargeable Li-Ion 3.7V battery
Dock Edge 96-557-F Polyester Fender Cover, 5-1/2 X 20", Burgundy - 96-557-F - 686-96557Ff1
Dolphin Fender Covers feature a stretch polyester fabric which is antimicrobrial and will not fade, mold, mildew or rot. An elastic top and bottom and included Velcro straps ensure the covers will never fall off.
Dock Edge 96256F Hd Solar Cap Light - De96256F - 686-96256Ff1
Not only attractive, but also adds value and function to your dock or deck. Incorporates stylish, durable solar lighting in an attractive colonial housing. Conveniently mounts to conventional 4" x 4" wooden posts so you can put them wherever you already have a post or wish to put one. Powerful charging performance and bright white LED with 360° illumination. Rechargeable batteries included.
Dock Edge 96306F Starlite Solar Capacitor W/6 Led'S, Charcoal Grey, Model 108 - De96306F - 686-96306F Superseded By: 686-De96306Ff1
These advanced solar lights are built for 10,000 on/off cycles to provide a long and useful life. A capacitor stores solar energy and recharges the battery if needed. On days with insufficient sunlight for charging the battery, the capacitor re-energizes the battery so you don't go without light. Visible up to 1/2 mile. 5-Year warranty. Designed for salt and fresh waterUp to 12 hours run time
Dock Edge 99001F Hd Anchor Chain Corner For Floating Docks - De99001F - 686-99001Ff1
Maximum corner strength when used with 99004F Outside Corner or any Corner Connecting Hinge. Accepts chain up to 1/2".
Dock Edge 99004F Outside Corner For Floating Docks - De99004F - 686-99004Ff1
Use with backer plates or inside corners at outside ends of docks, fingers and swim platforms. Use with backer plates or inside corners at outside ends of dock.
Dock Edge 99006F Washer Plate For Floating Docks - De99006F - 686-99006Ff1
Washer Plate
Dock Edge 99009F Male Corner Hinge For Floating Docks - De99009F - 686-99009Ff1
Can be used with all styles of Female Connector Hinges.
Dock Edge 99010F Female Corner Hinge For Floating Docks - De99010F - 686-99010Ff1
Can be used with all styles of Male Corner Hinge.
Dock Edge 99011F Female T Connector For Floating Docks - De99011F - 686-99011Ff1
Can be used with all styles of Male Connector Hinges.
Dock Edge 99013F Chain Retainer For Floating Docks - De99013F - 686-99013Ff1
Holds chain up to 1/2" to secure the dock in place.
Dock Edge Black Heavy Duty 6" W X 2" D X 6" L Piling Bumper - De1022Bf - 686-1022Bff1
Like all DockEdge+ Profiles, these Premium profiles are specifically constructed to be flexible so that they may be mounted vertically or horizontally on rounded or flat surfaces. This makes these profiles possibly the most versatile and useful addition to your dock as well as the most protective of your water craft. As with all DockEdge+ Premium profiles, each is manufactured from prime, Marine Grade PVC with UV inhibitors and fungicides for years of anti-yellowing and integral protection of your dock bumper system.
Dock Edge Boat Shield 48" Grey (Includes Screws) - De1007F - 686-1007F Superseded By: 686-De1007Ff1
This extruded U.V. stabilized polyethylene foam bumper with UV inhibitors is contoured at the back so it can be mounted both horizontally on your dock or vertically on pilings. The beveled edge helps deflect your boat's fenders so they do not catch under the profile. The light grey color matches up with the color of weathered wood. Stainless steel screws and washers included.
Dock Edge Bright White Howell Galvalume Fixed Dock Ladder With Hardware - De2105F - 686-2105Ff1
These ladders will make a durable and attractive addition to your dock, seawall or any marine application. Heavy 1-1/2" tubing ensures a positive grip and stainless steel hardware is includedRail height: 18-1/2 above dockDistance to the first step from the dock surface: 12"10" between stepsSteps are 3-3/4" deep and 14" wide
Dock Edge Bright White Howell Galvalume Flip-Up Dock Ladder With Hardware - De2113F - 686-2113Ff1
Available in Bright White polyester finished Galvalume or brushed stainless steel, these ladders are durable and attractive. Hinged design allows the ladder to flip up and out of the water when not in use. Easily secured in the up or down position with a handy retainer pin. Unique hinge design has no pinch points.
Dock Edge Cleatlite Solar Rechargeable Dock Light With Stainless Steel Mooring Cleat - De96250F - 686-96250Ff1
Solar light is mounted on top of a sturdy galvanized steel base, housed inside an attractive, Colonial style vinyl pillar. Easy to install and no wires. Will add style to your dock day or night. The lamp is designed to illuminate your boat, dock and stainless steel cleat, and not shine in your eyes. Each kit includes: pillar, stainless steel cleat, galvanized mounting base, solar light and rechargeable batteries. Designed for salt and fresh waterUp to 12 hours run time2 Replaceable, rechargeable AA NiMH 1.2V battery
Dock Edge Corner Bumper With Hardware White - De10571F - 686-10571F Superseded By: 686-De10571Ff1
Heavy duty air-filled bumper is constructed from marine grade PVC and features a built-in air valve for inflation or deflation if necessary. Includes UV inhibitors and fungicide.
Dock Edge De1001F Air Cushion™ Single "P" Profile, White, 8' - De1001F - 686-De1001Ff1
Easily installed on any horizontal or vertical surface. Large "P" section with large air volume provides excellent protection. 2-1/2" Protrusion (4" Overall w/top tab) x 3-3/4" Overall height.
Dock Edge De1005F Boat Saver 24" White (Includes Screws) - De1005F - 686-De1005Ff1
Developed specifically for AIR CUSHION™ spot protection. Like having a fender mounted where its needed the most. Mount vertically or horizontally on docks or boat houses. Molded in UV inhibitors and fungicides. Combine with other Dock Edge Profiles for total protection. Stainless steel mounting screws included.
Dock Edge De1006F Stainless Steel Mounting Screws And Robertson Driver Bit (100/Pk) - De1006F - 686-De1006Ff1
Stainless steel will prevent unsightly staining caused by rusting of regular steel fasteners. Oversized head eliminates need for washers. Recommended for use with all profiles. Comes with square head driver.
Dock Edge De1007F Boat Shield 48" Grey (Includes Screws) - De1007F - 686-De1007Ff1
This extruded U.V. stabilized polyethylene foam bumper with UV inhibitors is contoured at the back so it can be mounted both horizontally on your dock or vertically on pilings. The beveled edge helps deflect your boat's fenders so they do not catch under the profile. The light grey color matches up with the color of weathered wood. Stainless steel screws and washers included.
Dock Edge De1008Bf Ultraguard Black 35" Pvc Bumper - De1008Bf - 686-De1008Bff1
This bumper is manufactured from the same quality marine grade vinyl material as Dolphin Boat fenders and offers the ultimate in cushioning from impacts to your boat. Molded in ribs on the interior of the UltraGard which ensures that it is durable, will not collapse, yet is also very soft.
Dock Edge De1008F Protect Straight Hd 12" White Pvc - De1008F - 686-De1008Ff1
These heavy duty bumpers are manufactured from PVC with UV Inhibitors and Fungicides, have excellent shock absorption qualities and will not mark or mar the hull of your boat. The Protect™ bumpers also have many industrial applications where cushioning and protection are required.
Dock Edge De1020Bf Piling Bumper - De1020Bf - 686-De1020Bff1
Like all DockEdge+ Profiles, these Premium profiles are specifically constructed to be flexible so that they may be mounted vertically or horizontally on rounded or flat surfaces. This makes these profiles possibly the most versatile and useful addition to your dock as well as the most protective of your water craft. As with all DockEdge+ Premium profiles, each is manufactured from prime, Marine Grade PVC with UV inhibitors and fungicides for years of anti-yellowing and integral protection of your dock bumper system.
Dock Edge De1020F Piling Bumper - De1020F - 686-De1020Ff1
Like all DockEdge+ Profiles, these Premium profiles are specifically constructed to be flexible so that they may be mounted vertically or horizontally on rounded or flat surfaces. This makes these profiles possibly the most versatile and useful addition to your dock as well as the most protective of your water craft. As with all DockEdge+ Premium profiles, each is manufactured from prime, Marine Grade PVC with UV inhibitors and fungicides for years of anti-yellowing and integral protection of your dock bumper system.
Dock Edge De1054F Heavy Slant "P" Corner - De1054F - 686-De1054Ff1
Constructed of marine grade flexible PVC, resists chipping and cracking under normal use. Resistant to oil, gas and salt water. UV inhibitors prevent fading, sunlight degradation, blotching. Fungicides suppress the growth of mold, bacteria and mildew. Roto-molded for even wall thicknessFits heavy slant "P" profiles
Dock Edge De10571F Corner Bumper With Hardware White - De10571F - 686-De10571Ff1
Heavy duty air-filled bumper is constructed from marine grade PVC and features a built-in air valve for inflation or deflation if necessary. Includes UV inhibitors and fungicide.
Dock Edge De1057Gf Corner Bumper With Hardware Grey - De1057Gf - 686-De1057Gff1
Heavy duty air-filled bumper is constructed from marine grade PVC and features a built-in air valve for inflation or deflation if necessary. Includes UV inhibitors and fungicide.
Dock Edge De1058F Protect Straight Hd 12" White Pvc - De1058F - 686-De1058Ff1
These heavy duty bumpers are manufactured from PVC with UV Inhibitors and Fungicides, have excellent shock absorption qualities and will not mark or mar the hull of your boat. The Protect™ bumpers also have many industrial applications where cushioning and protection are required.
Dock Edge De1059F Protect Corner Hd 8" White Pvc - De1059F - 686-De1059Ff1
These heavy duty bumpers are manufactured from PVC with UV Inhibitors and Fungicides, have excellent shock absorption qualities and will not mark or mar the hull of your boat. The Protect™ bumpers also have many industrial applications where cushioning and protection are required.
Dock Edge De1060Wf Dock-Side Dock Bumper White - De1060Wf - 686-De1060Wff1
Rugged, air filled heavy wall molded PVC & integral inflation valve constructionThe ultimate in heavy impact protectionAngled ends to deflect craftCan be used in pairs to form inside cornersExcellent gunnel protection
Dock Edge De1062Wf Dock-Side Dock Bumper White - De1062Wf - 686-De1062Wff1
Rugged, air filled heavy wall molded PVC & integral inflation valve constructionThe ultimate in heavy impact protectionAngled ends to deflect craftCan be used in pairs to form inside cornersExcellent gunnel protection
Dock Edge De1064Wf Dock-Side Dock Bumper Corner White 12" X 12" - De1064Wf - 686-De1064Wff1
Rugged, air filled heavy wall molded PVC & integral inflation valve constructionThe ultimate in heavy impact protectionAngled ends to deflect craftCan be used in pairs to form inside cornersExcellent gunnel protection
Dock Edge De1116F Full Face Profile Dock Bumper, 8', Black, 3/Pk - De1116F - 686-De1116Ff1
Heavy-duty. Ideal for larger applications. Double internal channels with cross girder adds additional protection. Easy to install. 4-1/2" Overall height. Highly durable double internal channels and cross girder extrusionProtects against heavy impacts and provides a large contact areaUV Inhibitors and Fungicides prevent fading, yellowing, deterioration from sunlight and unsightly blotchingUnaffected by oil, gas or saltwater3 x 8' Sections totaling 24', with a mounting line, easy to mount
Dock Edge De1117F Slant "P" Profile, 8', Black, 3/Pk - De1117F - 686-De1117Ff1
Slant "P" Dock Bumper Profile is extruded with flexible PVC material that is excellent for use on all docks. 3 x 8' sections totaling 24', with a mounting line, easy to mount. Slanted face is designed to prevent hanging boat fenders from getting caught underneath the profile in rough watersPerfect for small boats and PWCPVC material with UV and fungicides
Dock Edge De1132F "C" Guard Economy Dock Bumper White, 10' Roll - De1132F - 686-De1132Ff1
Economy "C" Shape co-extruded profile is made of marine grade PVC with UV inhibitors to exacting standards. It will not crack or distort with temperature extremes. It can be used on flat surfaces as well as on pilings.
Dock Edge De1136F Economy Dock Guard Profile, 10' Roll, White - De1136F - 686-De1136Ff1
The economy Dock Guard co-extruded profile can be used in light to medium duty applications. It features a raised lip for gunwale protection on ski and bass boats.
Dock Edge De1150F Large Dockushion 48", White - De1150F - 686-De1150Ff1
The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.
Dock Edge De1151F Large Dockorner, White - De1151F - 686-De1151Ff1
The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.
Dock Edge De1152F Large Dockap, 2", 2/Pk, White - De1152F - 686-De1152Ff1
The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.
Dock Edge De1156G Dockushion Hd, 48", Black - De1156G - 686-De1156Gf1
The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.DocKushion HD is 20% thicker than our regular DocKushion. The revamped robust bullnose outside corner and inside corner make the DocKushion HD ideal for heavier-duty applications.
Dock Edge De1157G Outside Dockorner Hd, 8-3/8", Black - De1157G - 686-De1157Gf1
The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.DocKushion HD is 20% thicker than our regular DocKushion. The revamped robust bullnose outside corner and inside corner make the DocKushion HD ideal for heavier-duty applications.
Dock Edge De1158G Dockap Hd, 2", 2/Pk, Black - De1158G - 686-De1158Gf1
The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.DocKushion HD is 20% thicker than our regular DocKushion. The revamped robust bullnose outside corner and inside corner make the DocKushion HD ideal for heavier-duty applications.
Dock Edge De1159G Inside Dockorner Hd, 6-3/8", Black - De1159G - 686-De1159Gf1
The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.DocKushion HD is 20% thicker than our regular DocKushion. The revamped robust bullnose outside corner and inside corner make the DocKushion HD ideal for heavier-duty applications.
Dock Edge De1160F Full Face Profile, White, 16' Roll - De1160F - 686-De1160Ff1
Heavy-duty. Ideal for larger applications. Double internal channels with cross girder adds additional protection. Easy to install. 4-1/2" Overall height. Highly durable double internal channels and cross girder extrusionProtects against heavy impacts and provides a large contact areaUV Inhibitors and Fungicides prevent fading, yellowing, deterioration from sunlight and unsightly blotchingUnaffected by oil, gas or saltwater
Dock Edge De1170F Small "P" Profile, White, 16' Roll - De1170F - 686-De1170Ff1
Extruded with flexible PVC material, designed to be used to trap air and act as an air cushion. Excellent for use on all docks. 16' roll, easy to mount. 1-1/2" Protrusion (2-1/4" Overall w/top tab) x 2-5/8" overall height. Perfect for small outboards or personal watercraftContains molded-in UV inhibitors and fungicidesWill retain resiliency and brilliance for yearsUnaffected by oil, gas or saltwaterInstalls in minutes
Dock Edge De1180F Slant "P" Profile, White, 16' Roll - De1180F - 686-De1180Ff1
Slant "P" Dock Bumper Profile is extruded with flexible PVC material that is excellent for use on all docks. 16' roll, with a mounting line, easy to mount. Slanted face is designed to prevent hanging boat fenders from getting caught underneath the profile in rough watersPerfect for small boats and PWCPVC material with UV and fungicides
Dock Edge De1190F Standard "D" Profile White 16' Roll - De1190F - 686-De1190Ff1
Heavy-duty. Without a lip can mount vertically or horizontally anywhere on the dock face. Great for pilings. Color: White.
Dock Edge De1200F Prodock Commercial Grade Heavy P Profile, White, 8', 3/Pk - De1200F - 686-De1200Ff1
This exceptionally strong Profile is further reinforced by two internal supports. like all Dock Edge+ Profiles, it is constructed of marine grade flexible PVC, developed not to chip or crack under normal usage. Unaffected by oil, gas or salt water. UV and Fungus Inhibitors prevent fading, yellowing, deterioration from sunlight and unsightly blotching.
Dock Edge De1205F Prodock Commercial Grade Heavy D Profile, White, 8', 3/Pk - De1205F - 686-De1205Ff1
This exceptionally strong Profile is further reinforced by two internal supports. like all Dock Edge+ Profiles, it is constructed of marine grade flexible PVC, developed not to chip or crack under normal usage. Unaffected by oil, gas or salt water. UV and Fungus Inhibitors prevent fading, yellowing, deterioration from sunlight and unsightly blotching.
Dock Edge De1210F Prodock Commercial Grade Heavy Slant P Profile, White, 8', 3/Pk - De1210F - 686-De1210Ff1
This exceptionally strong Profile is further reinforced by two internal supports. like all Dock Edge+ Profiles, it is constructed of marine grade flexible PVC, developed not to chip or crack under normal usage. Unaffected by oil, gas or salt water. UV and Fungus Inhibitors prevent fading, yellowing, deterioration from sunlight and unsightly blotching.
Dock Edge De2003F Aluminum Kwik Release Dock Ladder With Hardware - De2003F - 686-De2003Ff1
This ladder is manufactured with 1" heavy wall aluminum tubing. All assembly hardware is stainless steel and assembly is quick and easy. Quick release kit included. Simply tilt the ladder up and slide it out for storage and cleaning, or mount the ladder permanently with its pre-drilled holes. Rail height :24 1/2'' above the dockDistance to first step from dock surface :12''Distance between steps: 10 1/2''Steps are 15'' W x 4 3/4'' D
Dock Edge De2004F Aluminum Kwik Release Dock Ladder With Hardware - De2004F - 686-De2004Ff1
This ladder is manufactured with 1" heavy wall aluminum tubing. All assembly hardware is stainless steel and assembly is quick and easy. Quick release kit included. Simply tilt the ladder up and slide it out for storage and cleaning, or mount the ladder permanently with its pre-drilled holes. Rail height :24 1/2'' above the dockDistance to first step from dock surface :12''Distance between steps: 10 1/2''Steps are 15'' W x 4 3/4'' D
Dock Edge De2005F Aluminum Kwik Release Dock Ladder With Hardware - De2005F - 686-De2005Ff1
This ladder is manufactured with 1" heavy wall aluminum tubing. All assembly hardware is stainless steel and assembly is quick and easy. Quick release kit included. Simply tilt the ladder up and slide it out for storage and cleaning, or mount the ladder permanently with its pre-drilled holes. Rail height :24 1/2'' above the dockDistance to first step from dock surface :12''Distance between steps: 10 1/2''Steps are 15'' W x 4 3/4'' D
Dock Edge De2043F Welded Aluminum Fixed Wide 3-Step Ladder - De2043F - 686-De2043Ff1
These durable ladders are ideal for sure-footed access to and from the water or boat. These rugged ladders will stand the test of time. Perfect for seawalls or dock applications with varying water levels. Rail Height: 21" above the dockDistance to the first step from the dock surface: 12"12" Between StepsSteps are 4" deep and 14" wide
Dock Edge De2044F Welded Aluminum Fixed Wide 4-Step Ladder - De2044F - 686-De2044Ff1
These durable ladders are ideal for sure-footed access to and from the water or boat. These rugged ladders will stand the test of time. Perfect for seawalls or dock applications with varying water levels. Rail Height: 21" above the dockDistance to the first step from the dock surface: 12"12" Between StepsSteps are 4" deep and 14" wide
Dock Edge De2045F Welded Aluminum Fixed Wide 5-Step Ladder - De2045F - 686-De2045Ff1
These durable ladders are ideal for sure-footed access to and from the water or boat. These rugged ladders will stand the test of time. Perfect for seawalls or dock applications with varying water levels. Rail Height: 21" above the dockDistance to the first step from the dock surface: 12"12" Between StepsSteps are 4" deep and 14" wide
Dock Edge De2047F Welded Aluminum Fixed Wide 7-Step Ladder - De2047F - 686-De2047Ff1
These durable ladders are ideal for sure-footed access to and from the water or boat. These rugged ladders will stand the test of time. Perfect for seawalls or dock applications with varying water levels. Rail Height: 21" above the dockDistance to the first step from the dock surface: 12"12" Between StepsSteps are 4" deep and 14" wide
Dock Edge De2064F Polyethylene Flip Up Dock Ladder 4 Step Grey - De2064F - 686-De2064Ff1
Tough and durable, this rotomolded polyethylene ladder swings up and out of the way, locking in place when not in use. Will not corrode with exposure and will not fade or crack. Molded-in U.V. inhibitors and fungicidesStainless Steel assembly hardwareRail Height: 20-1/2"Tread: 4" D x 14" W
Dock Edge De2073F Eco Fixed Dock Ladder, Weld Free Aluminum - De2073F - 686-De2073Ff1
These durable ladders have been designed to make a minimum carbon footprint. It is manufactured with no welding processes involved. Easily assembled in a few minutes with stainless steel fasteners. Wider steps make for a sure grip and a safe climb. Rail Height: 18-1/2" above the dockDistance to first step from dock surface: 11"Distance between steps: 11"Steps: 2-1/2" deep x 14" wide
Dock Edge De2075F Eco Fixed Dock Ladder, Weld Free Aluminum - De2075F - 686-De2075Ff1
These durable ladders have been designed to make a minimum carbon footprint. It is manufactured with no welding processes involved. Easily assembled in a few minutes with stainless steel fasteners. Wider steps make for a sure grip and a safe climb. Rail Height: 18-1/2" above the dockDistance to first step from dock surface: 11"Distance between steps: 11"Steps: 2-1/2" deep x 14" wide
Dock Edge De2084F Stand Off Roto Dock Ladder 4 Step, Grey - De2084F - 686-De2084Ff1
Tough and durable, this roto-molded ladder swings up and out of the way, locking in place when not in use. The Stand Off roto-molded ladder extends into the water at a 60 degree angle to make getting out of the water easier. Will not corrode with exposure and will not fade or crack. Molded-in U.V. inhibitors and fungicides. 20-1/2" Gable Height19-1/2" Gable Depth4" D x 14" W Tread12-1/2" To First Step10-1/2" Between Treads
Dock Edge De2103F Bright White Howell Galvalume Fixed Dock Ladder With Hardware - De2103F - 686-De2103Ff1
These ladders will make a durable and attractive addition to your dock, seawall or any marine application. Heavy 1-1/2" tubing ensures a positive grip and stainless steel hardware is includedRail height: 18-1/2 above dockDistance to the first step from the dock surface: 12"10" between stepsSteps are 3-3/4" deep and 14" wide
Dock Edge De2104F Bright White Howell Galvalume Fixed Dock Ladder With Hardware - De2104F - 686-De2104Ff1
These ladders will make a durable and attractive addition to your dock, seawall or any marine application. Heavy 1-1/2" tubing ensures a positive grip and stainless steel hardware is included.Rail height: 18-1/2 above dock.Distance to the first step from the dock surface: 12"10" between stepsSteps are 3-3/4" deep and 14" wide
Dock Edge De2123F Aluminum Flip Up Wide Step Ladder, 3-Step - De2123F - 686-De2123Ff1
With 4" x 16.75" ribbed anti-slip steps, this ladder flips up and out of the water when not in use, and is easily secured in the up or down position with a handy retainer pin. Clean, smooth, mill finish aluminum and welded construction. Large diameter gables and rails for strength and a sure grip. Easy to assemble, includes stainless steel hardware. Perfect for seawalls or dock applications with varying water levels. 19-1/2" Rail Height11" To First Step12" Between Treads4"D x 16-3/4"W Tread
Dock Edge De2124F Aluminum Flip Up Wide Step Ladder, 4-Step - De2124F - 686-De2124Ff1
With 4" x 16.75" ribbed anti-slip steps, this ladder flips up and out of the water when not in use, and is easily secured in the up or down position with a handy retainer pin. Clean, smooth, mill finish aluminum and welded construction. Large diameter gables and rails for strength and a sure grip. Easy to assemble, includes stainless steel hardware. Perfect for seawalls or dock applications with varying water levels. 19-1/2" Rail Height11" To First Step12" Between Treads4"D x 16-3/4"W Tread
Dock Edge De2125F Aluminum Flip Up Wide Step Ladder, 5-Step - De2125F - 686-De2125Ff1
With 4" x 16.75" ribbed anti-slip steps, this ladder flips up and out of the water when not in use, and is easily secured in the up or down position with a handy retainer pin. Clean, smooth, mill finish aluminum and welded construction. Large diameter gables and rails for strength and a sure grip. Easy to assemble, includes stainless steel hardware. Perfect for seawalls or dock applications with varying water levels. 19-1/2" Rail Height11" To First Step12" Between Treads4"D x 16-3/4"W Tread
Dock Edge De2127F Aluminum Flip Up Wide Step Ladder, 7-Step - De2127F - 686-De2127Ff1
With 4" x 16.75" ribbed anti-slip steps, this ladder flips up and out of the water when not in use, and is easily secured in the up or down position with a handy retainer pin. Clean, smooth, mill finish aluminum and welded construction. Large diameter gables and rails for strength and a sure grip. Easy to assemble, includes stainless steel hardware. Perfect for seawalls or dock applications with varying water levels. 19-1/2" Rail Height11" To First Step12" Between Treads4"D x 16-3/4"W Tread
Dock Edge De2153F Stand Off Welded Aluminum Ladder With Quick Release, 3-Step - De2153F - 686-De2153Ff1
This sturdy, lightweight ladder is manufactured from 1" square marine grade aluminum tubing. Quick Release systems are ideal for easy off-season or not-in-use storage. Angled design and large aluminum steps for a sure footing. Stainless Steel assembly hardware is included. Ideal for Pontoon boats as well as docks. 9-1/8" To First Step11" Between Treads5-1/4"D x 16"W Tread
Dock Edge De2154F Stand Off Welded Aluminum Ladder With Quick Release, 4-Step - De2154F - 686-De2154Ff1
This sturdy, lightweight ladder is manufactured from 1" square marine grade aluminum tubing. Quick Release systems are ideal for easy off-season or not-in-use storage. Angled design and large aluminum steps for a sure footing. Stainless Steel assembly hardware is included. Ideal for Pontoon boats as well as docks. 9-1/8" To First Step11" Between Treads5-1/4"D x 16"W Tread
Dock Edge De2155F Stand Off Welded Aluminum Ladder With Quick Release, 5-Step - De2155F - 686-De2155Ff1
This sturdy, lightweight ladder is manufactured from 1" square marine grade aluminum tubing. Quick Release systems are ideal for easy off-season or not-in-use storage. Angled design and large aluminum steps for a sure footing. Stainless Steel assembly hardware is included. Ideal for Pontoon boats as well as docks. 9-1/8" To First Step11" Between Treads5-1/4"D x 16"W Tread
Dock Edge De2157F Stand Off Welded Aluminum Ladder With Quick Release, 7-Step - De2157F - 686-De2157Ff1
This sturdy, lightweight ladder is manufactured from 1" square marine grade aluminum tubing. Quick Release systems are ideal for easy off-season or not-in-use storage. Angled design and large aluminum steps for a sure footing. Stainless Steel assembly hardware is included. Ideal for Pontoon boats as well as docks. 9-1/8" To First Step11" Between Treads5-1/4"D x 16"W Tread
Dock Edge De2175F Eco Flip-Up Dock Ladder - De2175F - 686-De2175Ff1
Designed to make a minimum carbon footprint, these ladders are manufactured with no welding processes involved to reduce material waste and save energy. Easy to assemble & includes stainless steel hardware. Ribbed anti-slip steps for a sure footing. Rail Height: 18-1/2" (47,0cm)Tread Depth: 2-1/2" (6,4cm)Tread Width: 14" (35,6cm)Distance to first step: 11" (27,9cm)Distance between treads: 11" (27,9cm)
Dock Edge De2411F "S" Dock Cleat Aluminum, Matte, 11" - De2411F - 686-De2411Ff1
Sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an enlarged counter-sunk hole for easy installation with a socket. Can be through bolted or lag bolted.
Dock Edge De2603Pf Flip-Up Ring Dock Cleat, Polished - De2603Pf - 686-De2603Pff1
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. Made from marine grade aluminum and white polyester powder coated. Use on small runaboats or personal watercraft. Cast aluminum cleats are sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength.
Dock Edge De2603Wf Flip-Up Ring Dock Cleat, White - De2603Wf - 686-De2603Wff1
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. Made from marine grade aluminum and white polyester powder coated. Use on small runaboats or personal watercraft. Cast aluminum cleats are sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength.
Dock Edge De2606Pf Flip-Up Dock Cleat, Polished - De2606Pf - 686-De2606Pff1
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. Made from marine grade aluminum and white polyester powder coated. Use on small runaboats or personal watercraft. Cast aluminum cleats are sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength.
Dock Edge De2608Bf Flip-Up Dock Cleat, Black - De2608Bf - 686-De2608Bff1
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. Made from marine grade aluminum and white polyester powder coated. Use on small runaboats or personal watercraft. Cast aluminum cleats are sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength.
Dock Edge De2608Pf Flip-Up Dock Cleat, Polished - De2608Pf - 686-De2608Pff1
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. Made from marine grade aluminum and white polyester powder coated. Use on small runaboats or personal watercraft. Cast aluminum cleats are sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength.
Dock Edge De2616Pf Premium Flip Up™ Cleat, 6", Polished - De2616Pf - 686-De2616Pff1
Double pivot design allows for easier rope attachment and added strength. These cleats are cast from solid Marine Grade Almag 35 aluminum. Polished using a special process to give a traditional metallic finish.
Dock Edge De2616Wf Premium Flip Up™ Cleat, 6", White - De2616Wf - 686-De2616Wff1
Double pivot design allows for easier rope attachment and added strength. These cleats are cast from solid Marine Grade Almag 35 aluminum and white powder coated.
Dock Edge De2804F Cast Iron Dock Cleat, Galvanized, 4" - De2804F - 686-De2804Ff1
Traditional hot-dip galvanized dock cleats. Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while securing the cleat to a surface.
Dock Edge De2806F Cast Iron Dock Cleat, Galvanized, 6" - De2806F - 686-De2806Ff1
Traditional hot-dip galvanized dock cleats. Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while securing the cleat to a surface.
Dock Edge De2808F Cast Iron Dock Cleat, Galvanized, 8" - De2808F - 686-De2808Ff1
Traditional hot-dip galvanized dock cleats. Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while securing the cleat to a surface.
Dock Edge De2810F Cast Iron Dock Cleat, Galvanized, 10" - De2810F - 686-De2810Ff1
Traditional hot-dip galvanized dock cleats. Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while securing the cleat to a surface.
Dock Edge De3050F Wake Watcher Mooring System, 1 Pr. - De3050F - 686-De3050Ff1
Protects your boat from dock contact and allows it to come close to the dock for easy passenger boarding. Includes 2ea: Base Stand Assemblies, Arm Assemblies, Spring Assemblies including Safety Sleeve, Line Assemblies, Shoulder Bolt with Nuts and Washers Automatically repositions your boat safely 3 ft. away from the dockSecurely moors boats up to 3500lb (1500kg)Adjustable tensionResists lateral, vertical and horizontal motion
Dock Edge De3400F Dock-Side Premium Mooring Whips (2/Box) - De3400F - 686-De3400Ff1
Ideal for protecting boats up to 33' in non-tidal areas from damage caused by wind and wake. These fiberglass whips act as a spring to maintain your boat at a safe convenient distance from your dock. Manufactured from solid fiberglass rod and wrapped in three additional multi-stage, cross wound fiber layers. Impervious to UV degradation, cold or heat. Unique line tensioner for easy, one handed operation. Complete set of two Premium Mooring Whips Mounting hardware and spring lines included. Sold as pair
Dock Edge De3850F Dock-Side Ultimate Mooring Whips (2/Box) - De3850F - 686-De3850Ff1
Manufactured from the same materials and to the same quality standards of the Premium Whips, these Ultimate Whips include rocker bases to compensate for most tidal fluctuations and to clear flying bridges and towers when not in use. Each whip set includes a pair of whips, rocker bases, whip and spring lines and one handed line tensioners. Easy set-up. Sold as pair.
Dock Edge De53131F Pvc Toon Fender, 6" X 36", Creme - De53131F - 686-De53131Ff1
The Toon Fender™ is the first fender designed especially for pontoon boatsIt is a complete system - There is no need to buy extra attachment devices or ropeNo need to remove - Double hook attachment will keep the fender from rolling around or popping upProtects below the water line - This is the only fender that can protect below the water line and does not float up like typical round fenders wouldProtects above th attachment point - This is the only fender that can protect above the attachment point leaving no area for docks or boats to catchTapered design - The shape of this fender sheds water and other objects off or away from the boatThin top stainless steel hook allows it to be attached between cushion upholstery - impossible with a typical rope attachmentOver 36" Long, adjusts from 17" to 34". Attachment - Protects from above the top railing to 4 to 5 inches below the floor trim, or can be adjusted to protect the pontoons themselves.
Dock Edge De53134F Pvc Toon Fender, 6" X 36", Beige - De53134F - 686-53134Ff1
The Toon Fender™ is the first fender designed especially for pontoon boatsIt is a complete system - There is no need to buy extra attachment devices or ropeNo need to remove - Double hook attachment will keep the fender from rolling around or popping upProtects below the water line - This is the only fender that can protect below the water line and does not float up like typical round fenders wouldProtects above th attachment point - This is the only fender that can protect above the attachment point leaving no area for docks or boats to catchTapered design - The shape of this fender sheds water and other objects off or away from the boatThin top stainless steel hook allows it to be attached between cushion upholstery - impossible with a typical rope attachmentOver 36" Long, adjusts from 17" to 34". Attachment - Protects from above the top railing to 4 to 5 inches below the floor trim, or can be adjusted to protect the pontoons themselves.
Dock Edge De53136F Pvc Toon Fender, 6" X 36", Black - De53136F - 686-De53136Ff1
The Toon Fender™ is the first fender designed especially for pontoon boatsIt is a complete system - There is no need to buy extra attachment devices or ropeNo need to remove - Double hook attachment will keep the fender from rolling around or popping upProtects below the water line - This is the only fender that can protect below the water line and does not float up like typical round fenders wouldProtects above th attachment point - This is the only fender that can protect above the attachment point leaving no area for docks or boats to catchTapered design - The shape of this fender sheds water and other objects off or away from the boatThin top stainless steel hook allows it to be attached between cushion upholstery - impossible with a typical rope attachmentOver 36" Long, adjusts from 17" to 34". Attachment - Protects from above the top railing to 4 to 5 inches below the floor trim, or can be adjusted to protect the pontoons themselves.
Dock Edge De55123F 20" Life Ring Orange Ccg Approved - De55123F - 686-De55123Ff1
CCG ApprovedRotomolded, polyethylene outer shell filled with closed cellular foam for long life under extreme marine conditions. Design allows easy rope replacement. Seven year warranty for ring body.
Dock Edge De55141F 24" Life Ring White Ccg Approved - De55141F - 686-De55141Ff1
CCG ApprovedRotomolded, polyethylene outer shell filled with closed cellular foam for long life under extreme marine conditions. Design allows easy rope replacement. Seven year warranty for ring body.
Dock Edge De55143F 24" Life Ring Orange Ccg Approved - De55143F - 686-De55143Ff1
CCG ApprovedRotomolded, polyethylene outer shell filled with closed cellular foam for long life under extreme marine conditions. Design allows easy rope replacement. Seven year warranty for ring body.
Dock Edge De55223F Dolphin Hardshell Life Ring Buoy - De55223F - 686-De55223Ff1
USCG Approved"DOLPHIN" Life Rings are U.S. Coast Guard and DOT approved. The Ring bodies are warranted for seven years under all climatic conditions and are resistant to fire, oil and gas. The hard shell prevents tearing and ripping and is virtually vandal proof.
Dock Edge De55243F Dolphin Hardshell Life Ring Buoy - De55243F - 686-De55243Ff1
USCG Approved"DOLPHIN" Life Rings are U.S. Coast Guard and DOT approved. The Ring bodies are warranted for seven years under all climatic conditions and are resistant to fire, oil and gas. The hard shell prevents tearing and ripping and is virtually vandal proof.
Dock Edge De56103F 30" Life Ring Orange Ccg Approved - De56103F - 686-De56103Ff1
CCG ApprovedRotomolded, polyethylene outer shell filled with closed cellular foam for long life under extreme marine conditions. Design allows easy rope replacement. Seven year warranty for ring body.
Dock Edge De56203F Dolphin Hardshell Life Ring Buoy Solas 30" Orange - De56203F - 686-De56203Ff1
USCG Approved"DOLPHIN" Life Rings are U.S. Coast Guard and DOT approved. The Ring bodies are warranted for seven years under all climatic conditions and are resistant to fire, oil and gas. The hard shell prevents tearing and ripping and is virtually vandal proof.
Dock Edge De58421F Recreational Decorative Ring Buoy 19" White With Red/White/Blue Rope - De58421F - 686-De58421Ff1
Dolphin™ life ring buoys are made of a rotomolded polyethylene shell for durability. These colorful and decorative buoys have excellent weather resistance and are completely mildew-proof. Not US Coast Guard approved.
Dock Edge De650F Dock-Side Ultimate Mooring Whips (2/Box) - De3650F - 686-De3650Ff1
Manufactured from the same materials and to the same quality standards of the Premium Whips, these Ultimate Whips include rocker bases to compensate for most tidal fluctuations and to clear flying bridges and towers when not in use. Each whip set includes a pair of whips, rocker bases, whip and spring lines and one handed line tensioners. Easy set-up. Sold as pair.
Dock Edge De73071F Oceanus Bumpers Dock Fender, 35" L, White - De73071F - 686-De73071Ff1
These heavy duty rotomolded bumpers incorporate all the benefits of a multi-usage product. Due to its design it will not only protect the lower bow but anywhere you install an Oceanus bumper. Fabricated to be permanently secured in place, it also has grooves which act as reinforcing ribs and can be used for temporary strapping in places where fastening isn't allowed.Ideal for commercial & marina applications. Fabricated with UV Inhibitors and Fungicides. Includes screw-in inflation valve.
Dock Edge De77301F Dolphin™ Twin Eye Fenders W/Lines & Covers, 5-1/2" X 20" White Fenders W/Black Covers, 2/Pk - De77301F - 686-De77301Ff1
Dolphin™ Premium twin-eye marine grade vinyl, ribbed fenders conveniently available in multi-packs. Includes 2 fenders with 3/8" x 5' double braided MFP fender lines with a reinforced nylon mesh loop on one end and 2 black fender covers.
Dock Edge De77331F Dolphin™ Twin Eye Fenders W/Lines & Covers, 6-1/2" X 23" White Fenders W/Black Covers, 2/Pk - De77231F - 686-De77331Ff1
Dolphin™ Premium twin-eye marine grade vinyl, ribbed fenders conveniently available in multi-packs. Includes 2 fenders with 3/8" x 5' double braided MFP fender lines with a reinforced nylon mesh loop on one end and 2 black fender covers.
Dock Edge De85-215-F Floating Joist Corner Kit - De85215F - 686-De85215Ff1
For floating dock applications where an outside corner is not necessary. Kit includes 2 joist corners and 4 washer plates. 1/4" Hot dip galvanized steel. Requires 8 x 2-1/2" x 1/2" carriage bolts, lock washer and nuts (not included).
Dock Edge De85-220-F Stationary Connector Hinge Kit - De85220F - 686-De85220Ff1
Join dock sections or a fixed ramp to the dock at varying angles. Kit includes 2 hinge sets and 4 backer plates. 11 Gauge 1/8" (nominal) hot dip galvanized steel with 7/16" holes for 3/8" carriage bolts. Requires 16 x 2-1/2" x 3/8" carriage bolts, lock washer and nuts (not included).
Dock Edge De85328F Dock Hinge Coupler For 3/8" Carriage Bolts. - De85328F - 686-De85328Ff1
Mounts to wood or aluminum and utlizes a standard mounting pattern for 3/8" carriage bolts. Self-contained: never drop or lose a pin againSelf-supporting: easy for dock owners to set-up & take-down their own docksSelf-aligning: functions from above, one 3/4" socket, secures in secondsPatented bushing system means no metal-on-metal squeaking - virtually silentWide range of motion allows for fluctuating water levels and wave action with less noiseEasy to install & align, works with existing corner brackets, backing plates and hardwareSafer for dock builders & owners: carries the heavy loads & no fingers between heavy docks
Dock Edge De85329F Dock Hinge Coupler For 1/2" Carriage Bolts. - De85329F - 686-De85329Ff1
Mounts to wood or aluminum and utlizes a standard mounting pattern for 1/2" carriage bolts. Self-contained: never drop or lose a pin againSelf-supporting: easy for dock owners to set-up & take-down their own docksSelf-aligning: functions from above, one 3/4" socket, secures in secondsPatented bushing system means no metal-on-metal squeaking - virtually silentWide range of motion allows for fluctuating water levels and wave action with less noiseEasy to install & align, works with existing corner brackets, backing plates and hardwareSafer for dock builders & owners: carries the heavy loads & no fingers between heavy docks
Dock Edge De87108F Mooring Ring White - De87108F - 686-De87108Ff1
Traditional mooring ring with white polyester powder coated finish to prevent rusting. 2-1/4" Ring.
Dock Edge De90-024-F 24" Rolling Wheel - De90024F - 686-De90024Ff1
For use at roll-in docks or boat lifts, this tough, rigid wheel offers stress, crack and impact resistance. At 24" (61,0cm) in diameter and an 800lb (362,9kg) capacity per wheel, it rolls easily over virtually any terrain and will not rust on the axle. Wheel accepts a 1-7/8" (4,8cm) O.D. axle.
Dock Edge De90302F Mooring Snubber Black - De90302F - 686-De90302Ff1
Ideal for both motor and sailing boats. The forces the line is exposed to are taken up by the elongation of the mooring snubber, reducing the shock load on the line as well as the boat's hardware.
Dock Edge De90304F Mooring Snubber Black - De90304F - 686-De90304Ff1
Ideal for both motor and sailing boats. The forces the line is exposed to are taken up by the elongation of the mooring snubber, reducing the shock load on the line as well as the boat's hardware.
Dock Edge De90306F Mooring Snubber Black - De90306F - 686-De90306Ff1
Ideal for both motor and sailing boats. The forces the line is exposed to are taken up by the elongation of the mooring snubber, reducing the shock load on the line as well as the boat's hardware.
Dock Edge De90600F Powder Coated Steel Frame Icart Dock Cart With Removable Poly Bucket & Pneumatic Tires - De90600F - 686-De90600Ff1
A rugged and useful addition to your dock arsenalPowder coated steel frameConvenient, removable heavy-wall (6.24 cubic ft) poly bucketE-Z-Roll inflatable pneumatic tires easily traverse the most irregular surfacesQuick and simple assembly
Dock Edge De90605F Powder Coated Steel Frame Icart Dock Cart With Removable Poly Bucket & Solid Tires - De90605F - 686-De90605Ff1
A rugged and useful addition to your dock arsenalPowder coated steel frameConvenient, removable heavy-wall (6.24 cubic ft) poly bucketLoad capacity up to 300 lbs.Solid tires roll easily on docks and hard surfacesQuick and simple assembly
Dock Edge De90700F Aluminum Collapsible Smartcart Dock Cart - De90700F - 686-De90700Ff1
Attractive, functional, the SmartCart may be your new best friend docksideCorrosion resistant aluminumCollapsible for quick and easy storageRemovable ends for long loads8.77 cubic ft. bucket - load capacity up to 300 lbs.E-Z-Roll inflatable pneumatic tires easily traverse the most irregular surfacesMinimal assembly required
Dock Edge De90800F Boarding Buddy Hand Rail - De90800F - 686-De90800Ff1
Safe, convenient access on and off a boat or dock. Ideal for any docking platform to help prevent accidents. Textured, high gloss powder coated finish. Simple lag or thru-bolt installation.
Dock Edge De91104F Torpedo Bumper 5" X 18", Navy Blue - De91104F - 686-De91104Ff1
Large, durable bumper adds an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from quality marine grade vinyl. Each torpedo bumper also includes a molded-in air valve for easy inflation or deflation as desired. When placed over dock leg pipes and mounting brackets, they prevent damage to your craft from protruding bolts. Designed to fit pipe up to 2" (5.1cm) O.D. and 2" x 6" or 2" x 8" frame docks.
Dock Edge De91107F Portacleat White - De91107F - 686-De91107Ff1
Dock cleat you can take along! Easy to store and use, powder coated cleat with rope ring fits in between dock timbers. Twists 90° to lock in place. Position lines exactly where needed regardless of where existing dock cleats may be located.
Dock Edge De91110F Torpedo Bumper 5" X 18", White - De91110F - 686-De91110Ff1
Large, durable bumper adds an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from quality marine grade vinyl. Each torpedo bumper also includes a molded-in air valve for easy inflation or deflation as desired. When placed over dock leg pipes and mounting brackets, they prevent damage to your craft from protruding bolts. Designed to fit pipe up to 2" (5.1cm) O.D. and 2" x 6" or 2" x 8" frame docks.
Dock Edge De91113F Torpedo Bumper 5" X 18", Royal Blue - De91113F - 686-De91113Ff1
Large, durable bumper adds an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from quality marine grade vinyl. Each torpedo bumper also includes a molded-in air valve for easy inflation or deflation as desired. When placed over dock leg pipes and mounting brackets, they prevent damage to your craft from protruding bolts. Designed to fit pipe up to 2" (5.1cm) O.D. and 2" x 6" or 2" x 8" frame docks.
Dock Edge De91114F Torpedo Bumper 5" X 18", Beige - De91114F - 686-De91114Ff1
Large, durable bumper adds an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from quality marine grade vinyl. Each torpedo bumper also includes a molded-in air valve for easy inflation or deflation as desired. When placed over dock leg pipes and mounting brackets, they prevent damage to your craft from protruding bolts. Designed to fit pipe up to 2" (5.1cm) O.D. and 2" x 6" or 2" x 8" frame docks.
Dock Edge De91117F Torpedo Bumper 5" X 18", Grey - De91117F - 686-De91117Ff1
Large, durable bumper adds an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from quality marine grade vinyl. Each torpedo bumper also includes a molded-in air valve for easy inflation or deflation as desired. When placed over dock leg pipes and mounting brackets, they prevent damage to your craft from protruding bolts. Designed to fit pipe up to 2" (5.1cm) O.D. and 2" x 6" or 2" x 8" frame docks.
Dock Edge De91118F Torpedo Bumper 5" X 18", Black - De91118F - 686-De91118Ff1
Large, durable bumper adds an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from quality marine grade vinyl. Each torpedo bumper also includes a molded-in air valve for easy inflation or deflation as desired. When placed over dock leg pipes and mounting brackets, they prevent damage to your craft from protruding bolts. Designed to fit pipe up to 2" (5.1cm) O.D. and 2" x 6" or 2" x 8" frame docks.
Dock Edge De91120F Torpedo Bumper 6" X 23", White - De91120F - 686-De91120Ff1
Large, durable bumper adds an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from quality marine grade vinyl. Each torpedo bumper also includes a molded-in air valve for easy inflation or deflation as desired. When placed over dock leg pipes and mounting brackets, they prevent damage to your craft from protruding bolts. Designed to fit pipe up to 2" (5.1cm) O.D. and 2" x 10" or 2" x 12" frame docks.
Dock Edge De91122F Torpedo Bumper 6" X 23", Royal Blue - De91122F - 686-De91122Ff1
Large, durable bumper adds an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from quality marine grade vinyl. Each torpedo bumper also includes a molded-in air valve for easy inflation or deflation as desired. When placed over dock leg pipes and mounting brackets, they prevent damage to your craft from protruding bolts. Designed to fit pipe up to 2" (5.1cm) O.D. and 2" x 10" or 2" x 12" frame docks.
Dock Edge De91126F Torpedo Bumper 6" X 23", Black - De91126F - 686-De91126Ff1
Large, durable bumper adds an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from quality marine grade vinyl. Each torpedo bumper also includes a molded-in air valve for easy inflation or deflation as desired. When placed over dock leg pipes and mounting brackets, they prevent damage to your craft from protruding bolts. Designed to fit pipe up to 2" (5.1cm) O.D. and 2" x 10" or 2" x 12" frame docks.
Dock Edge De91200F Shore Power Clip For 30 Amp Cords Yellow (4/Bag) - De91200F - 686-De91200Ff1
The safe and reliable way to secure electrical shore power cords in high traffic areas. Easy to install and use, the Shore Power Clip is designed to hold a sturdy 30 Amp marine power cord.
Dock Edge De91201F Shore Power Clip, For 50Amp Cord, White - De91201F - 686-De91201Ff1
The safe and reliable way to secure electrical shore power cords in high traffic areas. Easy to install and use, the Shore Power Clip is designed to hold a sturdy marine power cord in its' low profile "toe-friendly" shape.
Dock Edge De91205F Shore Power Clip, For 50Amp Cord, Yellow - De91205F - 686-De91205Ff1
The safe and reliable way to secure electrical shore power cords in high traffic areas. Easy to install and use, the Shore Power Clip is designed to hold a sturdy marine power cord in its' low profile "toe-friendly" shape.
Dock Edge De91206F Shore Power Clip, For 50Amp Cord, Black - De91206F - 686-De91206Ff1
The safe and reliable way to secure electrical shore power cords in high traffic areas. Easy to install and use, the Shore Power Clip is designed to hold a sturdy marine power cord in its' low profile "toe-friendly" shape.
Dock Edge De91409F Polyethylene Line Holder, 1Ea, Black, 1Ea - De91409F - 686-De91409Ff1
Made from high impact polyethylene (HDPE) with UV stabilizers to prevent cracking or deteriorating and ensure a longer life. Mounts easily with three screws. Use 1.5" or 2" screws for secure mount.
Dock Edge De91500F Fender Lok Kwik Adjust White - De91500F - 686-De91500Ff1
Ratcheted strap allows quick, easy attaching. Simply squeeze tabs to release fender for storage. One finger height adjuster allows quick adjustment from 4"-24".
Dock Edge De91561F Mfp Fender Line (2/Bag) - De91561F - 686-De91561Ff1
Strong and will float along the surface of the water. May be used for twin eye or center hole fender applications, are easily adjustable and will remain soft and pliable. Nylon mesh reinforced loop.
Dock Edge De91562F Mfp Fender Line (2/Bag) - De91562F - 686-De91562Ff1
Strong and will float along the surface of the water. May be used for twin eye or center hole fender applications, are easily adjustable and will remain soft and pliable. Nylon mesh reinforced loop.
Dock Edge De91566F Mfp Fender Line (2/Bag) - De91566F - 686-De91566Ff1
Strong and will float along the surface of the water. May be used for twin eye or center hole fender applications, are easily adjustable and will remain soft and pliable. Nylon mesh reinforced loop.
Dock Edge De91569F Mfp Fender Line (2/Bag) - De91569F - 686-De91569Ff1
Strong and will float along the surface of the water. May be used for twin eye or center hole fender applications, are easily adjustable and will remain soft and pliable. Nylon mesh reinforced loop.
Dock Edge De91571F Mfp Fender Line (2/Bag) - De91571F - 686-De91571Ff1
Strong and will float along the surface of the water. May be used for twin eye or center hole fender applications, are easily adjustable and will remain soft and pliable. Nylon mesh reinforced loop.
Dock Edge De91572F Mfp Fender Line (2/Bag) - De91572F - 686-De91572Ff1
Strong and will float along the surface of the water. May be used for twin eye or center hole fender applications, are easily adjustable and will remain soft and pliable. Nylon mesh reinforced loop.
Dock Edge De91576F Mfp Fender Line (2/Bag) - De91576F - 686-De91576Ff1
Strong and will float along the surface of the water. May be used for twin eye or center hole fender applications, are easily adjustable and will remain soft and pliable. Nylon mesh reinforced loop.
Dock Edge De91579F Mfp Fender Line (2/Bag) - De91579F - 686-De91579Ff1
Strong and will float along the surface of the water. May be used for twin eye or center hole fender applications, are easily adjustable and will remain soft and pliable. Nylon mesh reinforced loop.
Dock Edge De91801F Cone Head Piling Cap, Pvc - De91801F - 686-De91801Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge De91802F Cone Head Piling Cap, Pvc - De91802F - 686-De91802Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge De91811F Cone Head Piling Cap, Pvc - De91811F - 686-De91811Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge De91812F Cone Head Piling Cap, Pvc - De91812F - 686-De91812Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge De91821F Cone Head Piling Cap, Pvc - De91821F - 686-De91821Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge De91822F Cone Head Piling Cap, Pvc - De91822F - 686-De91822Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge De91871F Cone Head Piling Cap, Pvc - De91871F - 686-De91871Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge De91872F Cone Head Piling Cap, Pvc - De91872F - 686-De91872Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge De91881F Cone Head Piling Cap, Pvc - De91881F - 686-De91881Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge De91882F Cone Head Piling Cap, Pvc - De91882F - 686-De91882Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge De91891F Cone Head Piling Cap, Pvc - De91891F - 686-De91891Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge De91892F Cone Head Piling Cap, Pvc - De91892F - 686-De91892Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge De93122F Backer Plate For Floating Docks - De93122F - 686-De93122Ff1
Used to sandwich wood framing when another piece of hardware isn't used. Prevents bolt loosening or pull-thru.
Dock Edge De95072F Inflatable Dock Wheel Corner Mount, 12" White - De95072F - 686-De95072Ff1
Smooth rolling wheels offer substantial dock cushioning and feature molded-in valves to adjust the level of firmness. Heavy-duty, hot-dip galvanized hardware mounts securely to the dock. Guides boats into your slip easily, regardless of wind and current conditions.
Dock Edge De95078F Inflatable Dock Wheel Corner Mount, 9" White - De95078F - 686-De95078Ff1
Smooth rolling wheels offer substantial dock cushioning and feature molded-in valves to adjust the level of firmness. Heavy-duty, hot-dip galvanized hardware mounts securely to the dock. Guides boats into your slip easily, regardless of wind and current conditions.
Dock Edge De96111F Connector Pin For Floating Docks - De96111F - 686-De96111Ff1
Used to join male and female connectors.
Dock Edge De96255F Docklite Solar Rechargeable Dock And Deck Light - De96255F - 686-De96255Ff1
The wireless solar DockLite™ is easy to install. It's durable, weatherproof low profile construction makes it an attractive and functional addition to docks, walkways, decks and landings. Ideal for illuminating trouble spots on pathways or transition areas such as from dock to shore. With extended duty solar charged batteries the DockLite™ will last until sunrise. Automatic on-at-dusk.
Dock Edge De96263F Solar Rechargeable Heavy Duty Aluminum Docklite - De96263F - 686-De96263Ff1
Light up your dock, deck or pathways with this attractive, matte finish hi intensity aluminum Solar Dock Lite. Corrosion resistant aluminumDesigned for salt and fresh waterAutomatic on-at-duskEasy to install with no wiresBrite white LEDsTraffic tolerant, toe friendly designRechargeable batteries5 Lumens (emitted light)
Dock Edge De96268F Solar Rechargeable Piling Caplite With 6 Preinstalled Led Colors - De96268F - 686-De96268Ff1
6 Preinstalled LED colors allow you to change colors any time with a built-in color changing switch. Piling cap lights automatically come on at dusk, turn off at dawn, and provide 360° illumination for docking your boat or just dock safety at night. They are completely waterproof, made of durable UV resistant ABS and have a wildlife deterrent spike on top so they will look good for years. Installs easily in minutes and includes a rechargeable AAA Ni-Cad battery. Piling cap not included. Designed for salt and fresh waterUp to 12 hours run timeReplaceable, rechargeable AAA NiCD 1.2V battery
Dock Edge De96280F Solar Light W/Motion Sensor - De96280F - 686-De96280Ff1
Stainless steel light mounts on posts or any vertical servicePowerful solar charging performanceUp to 3 metres and 90° detection angle vertically and horizontallyWhite LED illuminates for 15 seconds when motion is detectedBlue LED illuminates in standbyReplaceable, rechargeable battery40 lumens (emitted light)
Dock Edge De96283F Solar Underwater Dock Light Set, 3/Pk - De96283F - 686-De96283Ff1
^Mounts to floating and stationary docks7 individual colors and 3 color mixes to choose from using remote controlIncludes 3 waterproof lights and wiringLarge solar panel, battery with on/off switch and remote control, heavy-duty mounting brackets and hardware are includedExtends up to 24 ft. between lightsUp to 80 lumens
Dock Edge De96286F Solar Panoramic Docklite - De96286F - 686-De96286Ff1
Perfect for docks and decksAutomatic on-at-duskWeatherproof, durableWorks 8 hours on a full chargeReplaceable, rechargeable battery4-5 lumens (emitted light)
Dock Edge De96287F Solar Dock And Deck Light, Ultra - De96287F - 686-De96287Ff1
Runs for 20 hours on a full chargeInstalls easily in minutesMade from polycarbonateAutomatic on-at-dusk2V, 200mA solar panelNi-MH 1200mAh batteryIP 68 Waterproof Rating
Dock Edge De96306F Starlite Solar Capacitor W/6 Led'S, Charcoal Grey, Model 108 - De96306F - 686-De96306Ff1
These advanced solar lights are built for 10,000 on/off cycles to provide a long and useful life. A capacitor stores solar energy and recharges the battery if needed. On days with insufficient sunlight for charging the battery, the capacitor re-energizes the battery so you don't go without light. Visible up to 1/2 mile. 5-Year warranty. Designed for salt and fresh waterUp to 12 hours run time
Dock Edge De96307F Starlite Solar Capacitor W/4 Led'S, Charcoal Grey, Model 120 - De96307F - 686-De96307Ff1
These advanced solar lights are built for 10,000 on/off cycles to provide a long and useful life. A capacitor stores solar energy and recharges the battery if needed. On days with insufficient sunlight for charging the battery, the capacitor re-energizes the battery so you don't go without light. Visible up to 1/2 mile. 5-Year warranty. Designed for salt and fresh waterUp to 12 hours run time
Dock Edge De96310F Solar Dock And Deck Light, Thin - De96310F - 686-De96310Ff1
Runs for 20 hours on a full chargeInstalls easily in minutesMade from polycarbonateAutomatic on-at-dusk5V, 60mA solar panelNi-MH 1200mAh batteryIP 68 Waterproof Rating
Dock Edge De96529F Polyester Fender Cover, 12 X 34", Navy Blue - De96529F - 686-96529Ff1
Dolphin Fender Covers feature a stretch polyester fabric which is antimicrobrial and will not fade, mold, mildew or rot. An elastic top and bottom and included Velcro straps ensure the covers will never fall off.
Dock Edge De96556F Polyester Fender Cover, 5-1/2 X 20", Black - De96556F - 686-96556Ff1
Dolphin Fender Covers feature a stretch polyester fabric which is antimicrobrial and will not fade, mold, mildew or rot. An elastic top and bottom and included Velcro straps ensure the covers will never fall off.
Dock Edge De96559F Polyester Fender Cover, 5-1/2 X 20", Navy Blue - De96559F - 686-96559Ff1
Dolphin Fender Covers feature a stretch polyester fabric which is antimicrobrial and will not fade, mold, mildew or rot. An elastic top and bottom and included Velcro straps ensure the covers will never fall off.
Dock Edge De96560F Polyester Fender Cover, 6-1/2 X 23", Red - De96560F - 686-96560Ff1
Dolphin Fender Covers feature a stretch polyester fabric which is antimicrobrial and will not fade, mold, mildew or rot. An elastic top and bottom and included Velcro straps ensure the covers will never fall off.
Dock Edge De99012F Male T Connector For Floating Docks - De99012F - 686-De99012Ff1
Can be used with all styles of Female Connector Hinges. Male T connector (DE99012F) has one welded 1/2" tab and to be used with the female T connector (DE99011F) to attach finers and ramps
Dock Edge Dedock Cleat Open Base Aluminum, Matte - De2406F - 686-De2406Ff1
Sand blasted to give a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an enlarged counter-sunk hole for easy installation with a socket. Can be through bolted or lag bolted.
Dock Edge Dedock Cleat Open Base Aluminum, Matte - De2408F - 686-De2408Ff1
Sand blasted to give a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an enlarged counter-sunk hole for easy installation with a socket. Can be through bolted or lag bolted.
Dock Edge Dedock Cleat Open Base Aluminum, Matte - De2410F - 686-De2410Ff1
Sand blasted to give a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an enlarged counter-sunk hole for easy installation with a socket. Can be through bolted or lag bolted.
Dock Edge Desolar Rechargeable Postlite 4" (2/Box) - De96258F - 686-De96258Ff1
Powerful solar charging performance and super bright LED's offer 6 possible color choices which can be changed with the flip of a switch. Lenticular light diffusing lens and domed reflector maximize light output. Installs easily with no wires. Patent pending universal fittings for 1-5/8", 1-7/8", 2-3/8", Brock Post, and 3-1/4" ID posts, as well as flat surfaces. Designed for fresh waterUp to 12 hours run timeReplaceable, rechargeable AAA NiCD 1.2V battery
Dock Edge Dock Guard™ Dock Bumper, 18" Straight, Black - De73107F - 686-73107Ff1
Roto-molded soft vinyl with UV Inhibitors and Fungicides. Each piece has angled ends to deflect craft and molded-in ribs for additional strength. The contours of each piece protects above as well as the dock face, providing excellent gunnel protection for bass and ski boats.
Dock Edge Dock Guard™ Dock Corner, 12", Black - De73104F - 686-73104Ff1
Roto-molded soft vinyl with UV Inhibitors and Fungicides. Each piece has angled ends to deflect craft and molded-in ribs for additional strength. The contours of each piece protects above as well as the dock face, providing excellent gunnel protection for bass and ski boats.
Dock Edge Dock-Side Dock Bumper Corner White 12" X 12" - De1064Wf - 686-1064Wf Superseded By: 686-De1064Wff1
Rugged, air filled heavy wall molded PVC & integral inflation valve construction The ultimate in heavy impact protectionAngled ends to deflect craftCan be used in pairs to form inside cornersExcellent gunnel protection
Dock Edge Dock-Side Dock Bumper White - De1062Wf - 686-1062Wf Superseded By: 686-De1062Wff1
Rugged, air filled heavy wall molded PVC & integral inflation valve construction The ultimate in heavy impact protectionAngled ends to deflect craftCan be used in pairs to form inside cornersExcellent gunnel protection
Dock Edge Dock-Side Premium Mooring Whips (2/Box) - De3600F - 686-De3600Ff1
Ideal for protecting boats up to 33' in non-tidal areas from damage caused by wind and wake. These fiberglass whips act as a spring to maintain your boat at a safe convenient distance from your dockManufactured from solid fiberglass rod and wrapped in three additional multi-stage, cross wound fiber layersImpervious to UV degradation, cold or heatUnique line tensioner for easy, one handed operationComplete set of two Premium Mooring WhipsMounting hardware and spring lines includedSold as pair
Dock Edge Dock-Side Premium Mooring Whips (2/Box) - De3800F - 686-3800Ff1
Ideal for protecting boats up to 33' in non-tidal areas from damage caused by wind and wake. These fiberglass whips act as a spring to maintain your boat at a safe convenient distance from your dockManufactured from solid fiberglass rod and wrapped in three additional multi-stage, cross wound fiber layersImpervious to UV degradation, cold or heatUnique line tensioner for easy, one handed operationComplete set of two Premium Mooring WhipsMounting hardware and spring lines includedSold as pair
Dock Edge Dock-Side Ultimate Mooring Whips (2/Box) - De3450F - 686-3450Ff1
Manufactured from the same materials and to the same quality standards of the Premium Whips, these Ultimate Whips include rocker bases to compensate for most tidal fluctuations and to clear flying bridges and towers when not in use. Each whip set includes a pair of whips, rocker bases, whip and spring lines and one handed line tensioners. Easy set-up. Sold as pair.
Dock Edge Dolphin Hardshell Life Ring Buoy - De55233F - 686-55233Ff1
USCG Approved"DOLPHIN" Life Rings are U.S. Coast Guard and DOT approved. The Ring bodies are warranted for seven years under all climatic conditions and are resistant to fire, oil and gas. The hard shell prevents tearing and ripping and is virtually vandal proof.
Dock Edge Flared Galvalume Chain Collar 1-7/8" Dia. - De90030F - 686-90030Ff1
Flared Galvalume™ collar to prevent chain wear or chaffing. One piece, weld-free construction and corrosion resistance you can rely on to last and last. Fits 1 7/8" dia. (2" nominal) collar/spindle openings. Galvalume™ steel alloy has 10X the corrosion resistance of hot-dip galvanized steel.
Dock Edge Flat Head Piling Cap, Pvc, Black - De91902F - 686-91902Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge Flat Head Piling Cap, Pvc, Black - De91922F - 686-91922Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge Flat Head Piling Cap, Pvc, Black - De91982F - 686-91982Ff1
Prevents piling tops from splintering and weathering. Made from Marine Grade PVC.
Dock Edge Howell Mooring Whips (2/Box) - De3100F - 686-3100Ff1
These fiberglass whips are exceptionally strong, attractive and will not obstruct your waterfront view. Acting as a spring, each whip is comprised of a solid, fiberglass rod, durable cast aluminum bases with a tough 3/8" thick mounting footprint and molded-in cleat and ring and thumb screw for securing the whip into position. Unaffected by UV, each whip also includes a unique tip with functional roller to allow easier access to your boat. Great for PWC's also. Sold as pair.
Dock Edge Howell Mooring Whips (2/Box) - De3120F - 686-3120Ff1
These fiberglass whips are exceptionally strong, attractive and will not obstruct your waterfront view. Acting as a spring, each whip is comprised of a solid, fiberglass rod, durable cast aluminum bases with a tough 3/8" thick mounting footprint and molded-in cleat and ring and thumb screw for securing the whip into position. Unaffected by UV, each whip also includes a unique tip with functional roller to allow easier access to your boat. Great for PWC's also. Sold as pair.
Dock Edge Instacleat Classic 5" White, Almag 35 - De2705Wf - 686-2705Wff1
Strong yet lightweight, cast aluminum. Features a bright, white, polyester poly coat finish and stainless steel T-bar. Installs securely in seconds.
Dock Edge Oceanus Bumpers Dock Fender, 35" L, Navy Blue - De73079F - 686-73079Ff1
These heavy duty rotomolded bumpers incorporate all the benefits of a multi-usage product. Due to its design it will not only protect the lower bow but anywhere you install an Oceanus bumper. Fabricated to be permanently secured in place, it also has grooves which act as reinforcing ribs and can be used for temporary strapping in places where fastening isn't allowed.Ideal for commercial & marina applications. Fabricated with UV Inhibitors and Fungicides. Includes screw-in inflation valve.
Dock Edge Piling Bumper - De1020Bf - 686-1020Bf Superseded By: 686-De1020Bff1
Like all DockEdge+ Profiles, these Premium profiles are specifically constructed to be flexible so that they may be mounted vertically or horizontally on rounded or flat surfaces. This makes these profiles possibly the most versatile and useful addition to your dock as well as the most protective of your water craft. As with all DockEdge+ Premium profiles, each is manufactured from prime, Marine Grade PVC with UV inhibitors and fungicides for years of anti-yellowing and integral protection of your dock bumper system.
Dock Edge Protect Corner Hd 8" White Pvc - De1059F - 686-1059F Superseded By: 686-De1059Ff1
These heavy duty bumpers are manufactured from PVC with UV Inhibitors and Fungicides, have excellent shock absorption qualities and will not mark or mar the hull of your boat. The Protect™ bumpers also have many industrial applications where cushioning and protection are required.
Dock Edge Protect Straight Hd 12" White Pvc - De1058F - 686-1058F Superseded By: 686-De1058Ff1
These heavy duty bumpers are manufactured from PVC with UV Inhibitors and Fungicides, have excellent shock absorption qualities and will not mark or mar the hull of your boat. The Protect™ bumpers also have many industrial applications where cushioning and protection are required.
Dock Edge Sentinel Solar Rechargeable Lite 35" With Tapered Pillar - De96252F - 686-96252Ff1
The Solar Sentinel™ is a solar station which incorporates stylish, durable solar lighting on an attractive, broad-based, tapered pillar to illuminate docking areas. It is also capable of acting as a life ring station with the addition of "J" hook ring holder. The Solar Sentinel™ includes solar light, tapered pillar and rechargeable batteries. Designed for salt and fresh waterUp to 12 hours run time2 Replaceable, rechargeable AA NiMH 1.2V battery
Dock Edge Solar Docklite, 2/Pk - De96262F - 686-96262Ff1
The durable, weatherproof low profile construction makes them an attractive and functional addition to docks, walkways, decks and landings. Ideal for illuminating trouble spots on pathways or transition areas such as from dock to shore. 10 Hour run time. Automatic on-at-duskWeatherproof and durableInstall easily with no wiresTraffic tolerant, toe friendly design
Dock Edge Solar Marker Light, Amber - De96503F - 686-96503Ff1
These automatic on-at-dusk lights are great for pilings and docks. Visible for 1000mConstant/Flashing/Off switchFlashes 35 times/minuteRuns for 45 hrs flashing or 20 hrs constant on a full chargeLithium 1000mAh non-replaceable batteryWaterproof IP44
Dock Edge Solar Marker Light, White - De96501F - 686-96501Ff1
These automatic on-at-dusk lights are great for pilings and docks. Visible for 1000mConstant/Flashing/Off switchFlashes 35 times/minuteRuns for 45 hrs flashing or 20 hrs constant on a full chargeLithium 1000mAh non-replaceable batteryWaterproof IP44
Dock Edge Solar Rechargeable Adjustable Angle Rod Holder Lite With 6 Preinstalled Led Colors With Replaceable Battery - De96285F - 686-96285Ff1
The rod holder light tapered design allows it to fit several sizes of rod holder and adjustable angle means you can position it to where it will be the most benefit. Six preinstalled color LEDs mean that you can change the color any time and it will illuminate 360° around it. Great for night fishing and an added bonus is that it can be used as a torch light when boarding and docking. Rechargeable, replaceable battery included. 10 Lumens emitted light. Designed for salt and fresh waterUp to 12 hours run timeReplaceable, rechargeable AAA NiCD 1.2V batter
Dock Edge Solar Rechargeable Dock Box Light - De96270F - 686-96270Ff1
Solar powered light is ideal for dock boxes or any compartment you want to brighten up. Includes a remote mount solar panel for charging and 4 bright white LEDs. Installs in minutes and has a weatherproof seal. Automatically turns on when the lid is opened beyond 60°. 6 Lumens emitted light.
Dock Edge Solar Rechargeable Dock Cleat 10" Cast Aluminum Alloy With Replaceable Battery - De96288F - 686-96288Ff1
Attractive and functional with solar charging performance and mooring strength Cast aluminum alloy chassisWide, sturdy base footprint5 Super bright white LEDs for side and base illuminationPolycarbonate side lensesRechargeable, replaceable AAA (Ni-MH) batteryWaterproof to standard IP65Up to 12 hours illumination from a single chargeAutomatic on-at-duskViewing distance up to 325'
Dock Edge Solar Rechargeable Piling Light With Replaceable Battery - De96264F - 686-96264Ff1
Each Piling Lite is a stylish, durable, heavy duty solar light on a corrosion free, broad-based, mini tower. Designed ideally for mounting to the top of pilings however, they are an attractive addition to any dock surface or entry. Includes bright white LED solar light, mini tower and replacable rechargable batteries. Designed for salt and fresh water2 Replaceable, rechargeable AA NiMH 1.2V batteriesUp to 10 hours run time
Dock Edge Stainless Steel Mounting Screws And Robertson Driver Bit (100/Pk) - De1006F - 686-1006F Superseded By: 686-De1006Ff1
Stainless steel will prevent unsightly staining caused by rusting of regular steel fasteners. Oversized head eliminates need for washers. Recommended for use with all profiles. Comes with square head driver.
Dock Edge Universal Profile 25' Roll, White - De1010F - 686-1010Ff1
Marine grade flexible white PVC, will not chip or crack under normal usage and is unaffected by gas, oil or saltwater. UV stabilizers prevent yellowing and deterioration. Stainless steel fasteners recommended, sold separately. Unique design allows mounting to suit any application. Mount flat on dock for traditional use, as a heavy-duty double wall fender, and as a corner protector. Can be used on pilings or on docks manufactured from 1" or 2" boards with no side trim. Mounts easily over the edge of deck boards. Prevent boat damage during docking.
Dock Edge Welded Aluminum Fixed Dock Ladder - De2013F - 686-2013Ff1
These rugged ladders are ideal for sure-footed access to and from the water or boat and will stand the test of time. Perfect for seawalls or dock applications with varying water levels.Distance to first step is 14 Distance between steps is 12" Steps are 15-3/4"W x 1-3/4" D665 lb. Capacity
Dock Edge Welded Aluminum Flip Up Dock Ladder - De2023F - 686-2023F Superseded By: 686-De2123Ff1
These rugged ladders are ideal for sure-footed access to and from the water or boat and will stand the test of time. Perfect for seawalls or dock applications with varying water levels. Ladders flip-up and out of the water when not in use and is easily secured in the up or down position with a retainer pin.Distance to first step is 14Distance between steps is 12"Steps are 15-3/4" W x 1-3/4" D665 lb. Capacity
Dockedge De965069F Fender Cover, Large, Black/Blue - Reversible - De965069F - 686-De965069Ff1
Fits: Twin eye: 10" x 30", Center hole: 10" x 25" Fits: Twin eye: 10" x 30", Center hole: 10" x 25"Fully reversible black/blue with durable double cordlock fastener with heavy elastic drawstring.Highly durable, colorfast and water repellent.UV resistant, antibacterial, dry-wick fabric for quick dryingDouble layer for superior abrasion resistance
Dockedge De965669F Fender Cover, Small, Black/Blue - Reversible - De965669F - 686-De965669Ff1
Fits: Twin eye: 6.5" x 23" , Center hole: 6.5" x 15"
Dockedge De965869F Fender Cover, Medium, Black/Blue - Reversible - De965869F - 686-De965869Ff1
Fits: Twin eye: 8.5" x 27", Center hole: 8" x 20"
Low Freeboard Fenders, White - De53311F - 686-53311Ff1
Made from 3/8" thick, tough, super soft PVC with UV Inhibitors and fungicides. Easy, positive attachment to the gunwale with P.V.C. coated hook. Twice as much protection over other fenders. Patented
