Evercoat
Woven Roving - 100946 - 75-100946F1
24 oz. Heavyweight fiberglass fabric. Very bulky for stronger repair applications where large build-up is needed.
White Marine Filler - 100574 - 75-100574F1
Quickly, easily and permanently repairs breaks, splits, holes and ruptures or other imperfections caused by accidents or normal wear and tear to fiberglass, wood, some metals and cement. Filler can be tinted with Evercoat Coloring Agents. White cream hardener is included.
Two Part Foam - 105612 - 75-105612F1
Quick curing, 2 pound density foam used for flotation, insulating and filling. Must be mixed 1:1 equal parts. Foam expansion rate is approximately 25:1. Calculate the size of the cavity to be filled to determine the amount of foam needed. Cavity Size Foam Required1 quart (57.75 cu. in.) 1.3 fl. oz.1 gallon (231 cu. in.) 5.2 fl. oz.7.48 gallons (1 cu. ft.) 38.2 fl. oz.
Scratch Patch White 1/2 Fl. Oz. - 105652 - 75-105652F1
Makes easy, permanent, color-matched repairs on hairline cracks, small scratches and chips in gel coat without sanding or using catalyst. Blend for match. Use resin colorant to tint white scratch patch for close match. Repair fiberglass boats, autos, bathtubs, shower stalls and hot tubs. Works on any gel-coated surface. Just clean surface, apply, smooth with plastic tool included, let semi-dry then remove excess. After final drying, wax to smooth into surrounding area. Includes 1/2 fl. oz. liquid patch material, applicator and instructions.
Scratch Patch Buff White 1/2 Fl. Oz. - 105653 - 75-105653F1
Makes easy, permanent, color-matched repairs on hairline cracks, small scratches and chips in gel coat without sanding or using catalyst. Blend for match. Use resin colorant to tint white scratch patch for close match. Repair fiberglass boats, autos, bathtubs, shower stalls and hot tubs. Works on any gel-coated surface. Just clean surface, apply, smooth with plastic tool included, let semi-dry then remove excess. After final drying, wax to smooth into surrounding area. Includes 1/2 fl. oz. liquid patch material, applicator and instructions.
Rage Premium Lightweight Filler - 100106 - 75-100106F1
Has tack- and stain-free characteristics. Cures to non-tacky surface in 15-20 minutes. Requires no cheese grating and won't load or clog sandpaper. Reduces risk of stain with filler under base/clear topcoats. Sands fast and smooth. Reduces pinholing. Blue cream hardener included.
Qt Resin W/Wax - 100553 - 75-100553F1
The perfect polyester resin for marine repairs. An extra-thick, finish coat resin, it cures tack-free. May be used on soft woods, fiberglass and metal. Ideal repair for hulls, decks, cabins and tanks. Seals all boat surfaces, resists impact and protects against dry rot. Use with Sea-Glass fabrics and Evercoat coloring agents. Hardener included.
Qt Gel Kote (5675) - 105675 - 75-105675F1
A polyester paste to permanently repair original, high-gloss gel coat finish. Conceals gouges, chips, scrapes and deep scratches in fiberglass gel coat. Non-run, non-sag formulation for rigid, flexible polyester resins to produce resiliency and toughness. Use resin colorant to tint to desired color. When added to White will produce pastels. When added to neutral will produce bold, bright colors. Easy to sand. Buff with fiberglass rubbing compound and boat wax.
Pva Mold Release - 105685 - 75-105685F1
Used for curing Evercoat Premium Polyester Gel-Kote. Apply by spraying a light "mist coating" over the catalyzed Gel-Kote products. Allows a full cure at the surface and eliminates the tackiness.
Pt Resin W/Wax - 100554 - 75-100554F1
The perfect polyester resin for marine repairs. An extra-thick, finish coat resin, it cures tack-free. May be used on soft woods, fiberglass and metal. Ideal repair for hulls, decks, cabins and tanks. Seals all boat surfaces, resists impact and protects against dry rot. Use with Sea-Glass fabrics and Evercoat coloring agents. Hardener included.
Polyester Glazing Putty 20 Oz. - 100400 - 75-100400F1
The original polyester glazing putty. Can be applied directly to bare metal, body filler, fiberglass and fully cured sanded top coats. Easily fills grind marks, pinholes, low spots and other minor imperfections. Contains ZNX-7™ for superior adhesion to galvanized steel, bare steel, aluminum, SMC, E-Coat and OEM finishes. No shrinkage. Easy dry. Reduces risk of staining. Blue cream hardener included.
Polyester Glazing Putty 1/2Gal - 100407 - 75-100407F1
The original polyester glazing putty. Can be applied directly to bare metal, body filler, fiberglass and fully cured sanded top coats. Easily fills grind marks, pinholes, low spots and other minor imperfections. Contains ZNX-7™ for superior adhesion to galvanized steel, bare steel, aluminum, SMC, E-Coat and OEM finishes. No shrinkage. Easy dry. Reduces risk of staining. Blue cream hardener included.
Polyester Gel Paste - 100695 - 75-100695F1
A neutral color polyester paste for permanent gel-coat marine repairs. Neatly covers gouges, scrapes and scratches in fiberglass. Mix paste with Evercoat Coloring Agents to provide correct color match. Hardener included.
Plastic Spreader Kit (3/Cd) - 100381 - 75-100381F1
Long lasting flexible plastic spreaders for fast, smooth application of resins, body filler or crack filler.
One Step Gel Coat Finish - 105671 - 75-105671F1
A resilient, one step, isophthalic polyester coating, which does not require PVA or other air-inhibitor to cure to a hard finish. Permanently repair or replace original, high-glass finish. Fills gouges, chips, scrapes and deep scratches in the fiberglass gel coat. Non-run, non-sag formulation of flexible polyester resins. Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with acetone (10%) to thin for sprayer applications.
One Step Finish Gelkote White Pt - 105670 - 75-105670F1
A resilient, one step, isophthalic polyester coating, which does not require PVA or other air-inhibitor to cure to a hard finish. Permanently repair or replace original, high-glass finish. Fills gouges, chips, scrapes and deep scratches in the fiberglass gel coat. Non-run, non-sag formulation of flexible polyester resins. Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with acetone (10%) to thin for sprayer applications.
Match N' Patch Gelcoat Repair Kit - 100668 - 75-100668F1
A set of materials for gel coat repairs of minor surface damage on boats. Eliminates deep scratches, gouges, cracks, etc. Mixes or matches to any desired color. Kit contains 1/4 pint gel-paste with hardener, six 1/4 ounce tubes of all primary pigment colors, mixing cup and sticks, cleaning solvent, special release film and instructions.
Lite Weight Filler-Gal - 100156 - 75-100156F1
Super lightweight auto body filler that applies without sagging. Lets you file or sand in minutes to even days later. Requires less sanding to reduce dust and clogging. Feather edges superbly. Cures under humid conditions. Blue cream hardener included.
Lite Weight Body Filler Qt - 100157 - 75-100157F1
Super lightweight auto body filler that applies without sagging. Lets you file or sand in minutes to even days later. Requires less sanding to reduce dust and clogging. Feather edges superbly. Cures under humid conditions. Blue cream hardener included.
Liq. Hardener 40Cc For Gallon - 100603 - 75-100603F1
For use with all polyester resins and gel coat. Plastic squeeze tube has graduated measure for mixing convenience. Methyl ethyl ketone peroxide (MEKP). Carded
Liq. Hardener 11Cc For Quart - 100602 - 75-100602F1
For use with all polyester resins and gel coat. Plastic squeeze tube has graduated measure for mixing convenience. Methyl ethyl ketone peroxide (MEKP). Carded
Laminating Resin Gallon No Wax - 100560 - 75-100560F1
A first coat resin for base coat applications. Remains tacky to hold fiberglass fabric in place on vertical surfaces. Needs no sanding between coats. Excellent for saturating fiberglass fabrics. Hardener included.
Kitty Hair® Fiberglass Filler - 100868 - 75-100868F1
A fiberglass filler with reinforcing fibers for fiberglass and sheet metal repairs. Easy to mix and work. Has double the strength of standard fillers. Waterproof. Blue cream hardener included.
Inflatable Boat Repair Kit - 100618 - 75-100618F1
Contains a tough formulation bonding adhesive with cleaning solvent plus 6" X 12' strips of heavy reinforcing fabric. Assures long lasting repairs of nylon life rafts, dinghies and other inflatable craft. Resists cuts, cracks and impact.
Gelcoat Repair Kit - 108000 - 75-108000F1
Permanently repairs nicks, gouges and scratches in fiberglass hulls and decks. Blends hundreds of colors and cures glass-hard in 1 hour. Special release paper and no-run polyester gel makes slick, no-sand finish quick and easy. Mix colors directly against hull or deck for perfect match. Also repairs countertops, appliances, bathroom tubs and sinks. Contains colors, polyester gel paste, hardener, release paper, mixing sticks, blending chart and instructions.
Gel Kote- White Pint - 105673 - 75-105673F1
A polyester paste to permanently repair original, high-gloss gel coat finish. Conceals gouges, chips, scrapes and deep scratches in fiberglass gel coat. Non-run, non-sag formulation for rigid, flexible polyester resins to produce resiliency and toughness. Use resin colorant to tint to desired color. When added to White will produce pastels. When added to neutral will produce bold, bright colors. Easy to sand. Buff with fiberglass rubbing compound and boat wax.
Gel Kote White Gallon - 105677 - 75-105677F1
A polyester paste to permanently repair original, high-gloss gel coat finish. Conceals gouges, chips, scrapes and deep scratches in fiberglass gel coat. Non-run, non-sag formulation for rigid, flexible polyester resins to produce resiliency and toughness. Use resin colorant to tint to desired color. When added to White will produce pastels. When added to neutral will produce bold, bright colors. Easy to sand. Buff with fiberglass rubbing compound and boat wax.
Gel Kote Neutral Quart - 105676 - 75-105676F1
A polyester paste to permanently repair original, high-gloss gel coat finish. Conceals gouges, chips, scrapes and deep scratches in fiberglass gel coat. Non-run, non-sag formulation for rigid, flexible polyester resins to produce resiliency and toughness. Use resin colorant to tint to desired color. When added to White will produce pastels. When added to neutral will produce bold, bright colors. Easy to sand. Buff with fiberglass rubbing compound and boat wax.
Gal Resin W/Wax - 100552 - 75-100552F1
The perfect polyester resin for marine repairs. An extra-thick, finish coat resin, it cures tack-free. May be used on soft woods, fiberglass and metal. Ideal repair for hulls, decks, cabins and tanks. Seals all boat surfaces, resists impact and protects against dry rot. Use with Sea-Glass fabrics and Evercoat coloring agents. Hardener included.
Formula 27-Quart - 100570 - 75-100570F1
The finest quality, extra-white plastic waterproof filler for filling dents, scrapes and gouges in wood, metal, fiberglass and concrete. A true miracle mender that won't shrink, crack or pop out. A long time favorite of consumers everywhere. Hardener included.
Formula 27-Pint - 100571 - 75-100571F1
The finest quality, extra-white plastic waterproof filler for filling dents, scrapes and gouges in wood, metal, fiberglass and concrete. A true miracle mender that won't shrink, crack or pop out. A long time favorite of consumers everywhere. Hardener included.
Formula 27-Half Pint - 75-100572 - 75-100572F1
The finest quality, extra-white plastic waterproof filler for filling dents, scrapes and gouges in wood, metal, fiberglass and concrete. A true miracle mender that won't shrink, crack or pop out. A long time favorite of consumers everywhere. Hardener included.
Fiberglass Tape 4" X 10 Yd - 100932 - 75-100932F1
6 oz. cloth-woven tape in narrow widths with non-raveling edges. Perfect for fiberglassing seams, chines, keels, small patch jobs and on corner and edges.
Fiberglass Repair Kit Quart - 100370 - 75-100370F1
Fast and easy permanent repairs of fiberglass, most woods and metals. Strengthens, repairs and rebuilds. Repair cracks and holes in fiberglass and wood. Kits may be used for small lay-up jobs or fabricating missing fiberglass panels.Includes: Fiberglass fabric, spreader stick, polyester resins (or resin gel) and liquid hardener.
Fiberglass Cloth 44" X 3 Yd - 100912 - 75-100912F1
Fine quality 6 oz. fiberglass fabric. Becomes transparent when completely saturated with resin. High strength and designed for super repairs and rebuilding of cracks, breaks and holes.
Fiberglass Cloth 44" X 1 Yd - 100911 - 75-100911F1
Fine quality 6 oz. fiberglass fabric. Becomes transparent when completely saturated with resin. High strength and designed for super repairs and rebuilding of cracks, breaks and holes.
Fiberglass Cloth 38" X 3 Yd 6 Oz. - 100918 - 75-100918F1
Fine quality 6 oz. fiberglass fabric. Becomes transparent when completely saturated with resin. High strength and designed for super repairs and rebuilding of cracks, breaks and holes.
Fiberglass Cloth 38" X 1 Yd 6 Oz. - 100917 - 75-100917F1
Fine quality 6 oz. fiberglass fabric. Becomes transparent when completely saturated with resin. High strength and designed for super repairs and rebuilding of cracks, breaks and holes.
Fiber Glass-Evercoat 100903 Fiberglass Cloth, 38" X 60 Yd, 6 Oz. - 100903 - 75-100903F1
Fine quality 6 oz. fiberglass fabric. Becomes transparent when completely saturated with resin. High strength and designed for super repairs and rebuilding of cracks, breaks and holes.100903 is priced by the yard and sold by the full roll only.
F/G Tape 4" X 50 Yd 6 Oz. - 100922 - 75-100922F1
6 oz. cloth-woven tape in narrow widths with non-raveling edges. Perfect for fiberglassing seams, chines, keels, small patch jobs and on corner and edges.
F/G Repair Kit-8 Oz. - 100637 - 75-100637F1
Fast and easy permanent repairs of fiberglass, most woods and metals. Strengthens, repairs and rebuilds. Repair cracks and holes in fiberglass and wood. Kits may be used for small lay-up jobs or fabricating missing fiberglass panels.Includes: Fiberglass fabric, spreader stick, polyester resins (or resin gel) and liquid hardener.
Everglass® Body Filler - 100632 - 75-100632F1
Short strand, fiberglass reinforced body filler. High strength, high build and waterproof. Excellent for repairing holes, rusted metal, body seams and shattered fiberglass. Blue cream hardener included.
Evercoat 100942 Fiberglass Mat, 38" X 30" - 100942 - 75-100942F1
100% 1.5 oz. fiberglass in a non-woven state. For bulk build up when repairing holes and badly damaged areas. Also molds and builds fiberglass objects (bait, water tanks, etc.).
Evercoat 100941 Fiberglass Mat, 1 Sq Yard - 100941 - 75-100941F1
100% 1.5 oz. fiberglass in a non-woven state. For bulk build up when repairing holes and badly damaged areas. Also molds and builds fiberglass objects (bait, water tanks, etc.).
Evercoat 100940 Fiberglass Mat, 38" X 34" - 100940 - 75-100940F1
100% 1.5 oz. fiberglass in a non-woven state. For bulk build up when repairing holes and badly damaged areas. Also molds and builds fiberglass objects (bait, water tanks, etc.).
Cream Hardener - White - 101607 - 75-101607F1
Hardening agent for use with all polyester fillers. White BPO formula maintains color of filler to minimize excessive priming.
Coloring Agent-Yellow 1 Oz. - 100505 - 75-100505F1
Popular gel-matched coloring agents that blend with polyester resins, gel paste, epoxy resins, Formula 27, Skid-No-More and putty.1 oz. tube
Coloring Agent-White 1 Oz. - 100509 - 75-100509F1
Popular gel-matched coloring agents that blend with polyester resins, gel paste, epoxy resins, Formula 27, Skid-No-More and putty.1 oz. tube
Coloring Agent-Tropical Red - 100503 - 75-100503F1
Popular gel-matched coloring agents that blend with polyester resins, gel paste, epoxy resins, Formula 27, Skid-No-More and putty.1 oz. tube
Coloring Agent-Brown 1 Oz. - 100506 - 75-100506F1
Popular gel-matched coloring agents that blend with polyester resins, gel paste, epoxy resins, Formula 27, Skid-No-More and putty.1 oz. tube
Coloring Agent-Black 1 Oz. - 100508 - 75-100508F1
Popular gel-matched coloring agents that blend with polyester resins, gel paste, epoxy resins, Formula 27, Skid-No-More and putty.1 oz. tube
Coloring Agent-Admiral Blue - 100507 - 75-100507F1
Popular gel-matched coloring agents that blend with polyester resins, gel paste, epoxy resins, Formula 27, Skid-No-More and putty.1 oz. tube
Boatyard Resin Gallon W/Wax - 100517 - 75-100517F1
A general purpose polyester resin. Economical. Thixotropic. Has excellent wettability and good strength. Hardener included.
Boaters Choice Resin W/Wax - 105501 - 75-105501F1
A general purpose polyester resin. Contains wax for a tack free finish. Includes MEKP hardener.
Boat Yard Resin Quart W/Wax - 100518 - 75-100518F1
A general purpose polyester resin. Economical. Thixotropic. Has excellent wettability and good strength. Hardener included.
Boat Yard Resin 5 Gl W/Wax - 100519 - 75-100519F1
A general purpose polyester resin. Economical. Thixotropic. Has excellent wettability and good strength. Hardener included.
3 X 4 Spreaders - Bulk 72/Bx - 100524 - 75-100524F1
Long lasting flexible plastic spreaders for fast, smooth application of resins, body filler or crack filler.
