Forespar
Liquid Marelube - 770055 - 108-770055F1
Liquid MareLube™ is designed for valves where access is difficult or convenience is desired. Simply pour Liquid MareLube into the system through the valve tailpipe or hose, and activate the handle of the valve. This is a true Readily Biodegradable and biorenewable liquid lubricant developed for the regular maintenance of marine valves and seacocks. This valve service should be performed several times a season to reduce marine growth and keep seals lubricated.
Forespar Vent Barb - 903004 - 108-903004F1
The MF-846 vent barb assembly option can be used in lieu of the standard MF-841 vent cap/duckbill. This option allows venting to the outside of the hull via a 1/4"(6.35mm) hose.
Forespar Tri-Reacher Whisker Pole - 408201 - 108-408201F1
The whisker pole will allow deeper sailing angles and eliminate the need for constant jibing downwind. On long downwind legs, the additional rigging of fore and after guys (attached to the outboard end) will further stabilize the pole. This will also allow emergency furling of the headsail without the need to go forward and deal with the pole first. The inboard ends are Forespar's time proven 'UTS' style socket end or 'UXP' piston style. The outboard end is our 'UXP' style. The 'UTS' end will only fit the Forespar toggle mast car (#333004). The 'UXP' style fits #331000 RC-125 Ring Car or FC-125 (#332002) mast cars and #332025 fixed mast mounts. For use on boats 31'-40': Stows at just 7', telescopes to 21'. Weighs just 19 pounds.
Forespar T150 Marelon Raw Water Strainer, 1-1/2" - 906166 - 108-906166F1
Consists of a Marelon head and a polycarbonate bucket with a stainless steel screen. The screw on clear bucket has a replaceable gasket for a positive seal and ease of cleaning. The T-Stainer allows lower installations. Includes a mounting bracket that allows ports to face any direction, Flow rate is 40 GPM+
Forespar Sta-Plug Foam Emergency Plug - 150110 - 108-150110F1
The StaPlug is the modern solution for emergency leaks on any boat and for maintenance of valves and thruhulls. The StaPlug is a soft, cone shaped plug solid, spongy and coated with a flexible sealer to deal with any hull breach from a small hole or a large tear from a collision. Unlike old fashioned wooden plugs, StaPlug's soft cone shape form allows it to be compressed by hand or cut to fit into any hole whether in the hull or even in leaky or damaged pipes and other thru-hulls. Keep a couple on hand as the near perfect "just in case". Not for fuel leaks.
Forespar Nova Davit™ - 153302 - 108-153302F1
Reinforced Marelon™ gussets to allow each arm to lift 175lbs for a total davit lift weight of 350lbs. Longer 45" lift arms also extend farther away from the transom allowing the system to accommodate larger dinghies. 4 sheaves for easy lifting and 2 cleats. Each arm is mounted independently using a stainless steel support bracket that is removable and allows the davit arms to swing into the boat. Each kit contains two, 4 to 1 lifting bridles, 4 cleats and all necessary components for mounting the davit system on a boat that has a 23"-32" high stern rail.
Forespar Motor Mate™ - 153100 - 108-153100F1
Features heavy duty anodized aluminum, powder coated white for added corrosion resistance. The unit stores in its own 31" x 6" bag. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for SCUBA tanks, ice, duffel bags, groceries, etc. The Motor Mate™ uses a Railfast® mounted ring on the rail and a 'toe' on the cockpit coaming directly under the rail. Ideal for lifting outboard motors, sea bags, SCUBA gear, etc.Boom length: 20"Assembled height: 54"Weight: 12 lbs.
Forespar Mf850 Marelon Ptfe Ball Valve - 905105 - 108-905105F1
Precision molded in high strength glass-reinforced Marelon. Their strength, light weight, and complete freedom from corrosion and electrolysis make them the ideal valve for controlling inlet and outlet water requirements above and below the waterline.
Forespar Mf850 Marelon Ptfe Ball Valve - 905104 - 108-905104F1
Precision molded in high strength glass-reinforced Marelon. Their strength, light weight, and complete freedom from corrosion and electrolysis make them the ideal valve for controlling inlet and outlet water requirements above and below the waterline.
Forespar Mf850 Marelon Ptfe Ball Valve - 905103 - 108-905103F1
Precision molded in high strength glass-reinforced Marelon. Their strength, light weight, and complete freedom from corrosion and electrolysis make them the ideal valve for controlling inlet and outlet water requirements above and below the waterline.
Forespar Mf850 Marelon Ptfe Ball Valve - 905102 - 108-905102F1
Precision molded in high strength glass-reinforced Marelon. Their strength, light weight, and complete freedom from corrosion and electrolysis make them the ideal valve for controlling inlet and outlet water requirements above and below the waterline.
Forespar Mf850 Marelon Ptfe Ball Valve - 905101 - 108-905101F1
Precision molded in high strength glass-reinforced Marelon. Their strength, light weight, and complete freedom from corrosion and electrolysis make them the ideal valve for controlling inlet and outlet water requirements above and below the waterline.
Forespar Mf850 Marelon Ptfe Ball Valve - 905100 - 108-905100F1
Precision molded in high strength glass-reinforced Marelon. Their strength, light weight, and complete freedom from corrosion and electrolysis make them the ideal valve for controlling inlet and outlet water requirements above and below the waterline.
Forespar Mf849 3/4" Marelon Flange Mounting Ptfe Seacock - 904010 - 108-904010F1
Molded from lightweight, high-strength glass-reinforced Marelon™ composite, these flanged seacocks don't corrode, and are highly resistant to UV degradation and abrasion. Their NPS parallel threads can be sealed with PTFE tape or even plumber's putty. These seacocks can also be fitted to mate with bronze fittings. Marelon is UV stabilized and will not deteriorate in sunlight.
Forespar Mf849 1/2" Marelon Flange Mounting Ptfe Seacock - 904009 - 108-904009F1
Molded from lightweight, high-strength glass-reinforced Marelon™ composite, these flanged seacocks don't corrode, and are highly resistant to UV degradation and abrasion. Their NPS parallel threads can be sealed with PTFE tape or even plumber's putty. These seacocks can also be fitted to mate with bronze fittings. Marelon is UV stabilized and will not deteriorate in sunlight.
Forespar Mf849 1-1/2" Marelon Flange Mounting Ptfe Seacock - 904011 - 108-904011F1
Molded from lightweight, high-strength glass-reinforced Marelon™ composite, these flanged seacocks don't corrode, and are highly resistant to UV degradation and abrasion. Their NPS parallel threads can be sealed with PTFE tape or even plumber's putty. These seacocks can also be fitted to mate with bronze fittings. Marelon is UV stabilized and will not deteriorate in sunlight.
Forespar Mf810 Marelon Water Strainer, 1-1/2" - 906066 - 108-906066F1
Made of Marelon® and features an integral mounting bracket and clear polycarbonate lid for ready inspection. The stainless steel strainer basket can be easily removed for cleaning. Flow rate is 40 GPM.
Forespar Mast Pad Eye, Curved Base - 400002 - 108-400002F1
To compliment our medium size Whisker Poles (7-15 and smaller), Forespar® designed the stainless steel PE-3SF & PE-3SC mast pad eyes. Measuring 2-3/4" x 2", pad eyes have inside ring diameters of 1-5/8". PE-3SF is for flat mast surfaces. PE-3SC is slightly bent to better accommodate a curved mast.
Forespar Marelube™ Tef45™, 4 Oz. Jar - 770067 - 108-770067F1
A highly water-resistant synthetic lubricant grease containing 45% PTFE, the highest PTFE available. Perfect for heavy loads and bi-metal anti-corrosion applications. Also works well at protecting against rust corrosion and anti-seize applications.
Forespar Marelube™ Tef45™, 30 Cc Syringe - 770066 - 108-770066F1
A highly water-resistant synthetic lubricant grease containing 45% PTFE, the highest PTFE available. Perfect for heavy loads and bi-metal anti-corrosion applications. Also works well at protecting against rust corrosion and anti-seize applications.
Forespar Marelube Valve Lubricant, 4 Oz. - 770050 - 108-770050F1
A synthetic advanced lubrication formula designed to keep valve seals and balls working smoothly in marine plumbing systems. It is a clear, non-staining and nontoxic lube that is perfect for traditional bronze fittings, as well as all composite plumbing fixtures like Forespar's Marelon® parts.
Forespar Marelon Scoop Strainer, White - 906060 - 108-906060F1
High-strength, high speed, made of glass-reinforced non-corrosive Marelon®. Two piece construction allows for greater ease in installation.
Forespar Marelon Scoop Strainer, White - 906059 - 108-906059F1
High-strength, high speed, made of glass-reinforced non-corrosive Marelon®. Two piece construction allows for greater ease in installation.
Forespar Marelon Male Elbow - 901004 - 108-901004F1
Made from high-strength glass-reinforced Marelon. Dimension 'A' indicates pipe thread size. All elbows sold in U.S.A. have straight pipe threads.
Forespar Marelon Male Elbow - 901003 - 108-901003F1
Made from high-strength glass-reinforced Marelon. Dimension 'A' indicates pipe thread size. All elbows sold in U.S.A. have straight pipe threads.
Forespar Marelon Male Elbow - 901002 - 108-901002F1
Made from high-strength glass-reinforced Marelon. Dimension 'A' indicates pipe thread size. All elbows sold in U.S.A. have straight pipe threads.
Forespar Marelon Male Elbow - 901001 - 108-901001F1
Made from high-strength glass-reinforced Marelon. Dimension 'A' indicates pipe thread size. All elbows sold in U.S.A. have straight pipe threads.
Forespar Marelon Male Elbow - 901000 - 108-901000F1
Made from high-strength glass-reinforced Marelon. Dimension 'A' indicates pipe thread size. All elbows sold in U.S.A. have straight pipe threads.
Forespar Marelon Female Elbow - 901010 - 108-901010F1
Made from high-strength glass-reinforced Marelon. Dimension 'A' indicates pipe thread size. All elbows sold in U.S.A. have straight pipe threads.
Forespar Marelon Female Elbow - 901008 - 108-901008F1
Made from high-strength glass-reinforced Marelon. Dimension 'A' indicates pipe thread size. All elbows sold in U.S.A. have straight pipe threads.
Forespar Marelon Female Elbow - 901007 - 108-901007F1
Made from high-strength glass-reinforced Marelon. Dimension 'A' indicates pipe thread size. All elbows sold in U.S.A. have straight pipe threads.
Forespar Marelon Female Elbow - 901006 - 108-901006F1
Made from high-strength glass-reinforced Marelon. Dimension 'A' indicates pipe thread size. All elbows sold in U.S.A. have straight pipe threads.
Forespar Marelon 5/8" Vented Loop/Siphon Valve - 903003 - 108-903003F1
Vented loops are vital components to any onboard plumbing system reducing the risk of sinking or flooding. The glass reinforced composite Marelon™ Vented Loops allow air to enter the lines preventing that dangerous back siphoning effect. Use above the waterline on your head discharge system, bilge pump, the engine, gen-sets, air conditioners, ballast tanks or other equipment. Vented loops help make sure your boat stays afloat after the pumps are turned off.
Forespar Marelon 3/4" Vented Loop/Siphon Valve - 903001 - 108-903001F1
Vented loops are vital components to any onboard plumbing system reducing the risk of sinking or flooding. The glass reinforced composite Marelon™ Vented Loops allow air to enter the lines preventing that dangerous back siphoning effect. Use above the waterline on your head discharge system, bilge pump, the engine, gen-sets, air conditioners, ballast tanks or other equipment. Vented loops help make sure your boat stays afloat after the pumps are turned off.
Forespar Marelon 1/2" Vented Loop/Siphon Valve - 903008 - 108-903008F1
Vented loops are vital components to any onboard plumbing system reducing the risk of sinking or flooding. The glass reinforced composite Marelon™ Vented Loops allow air to enter the lines preventing that dangerous back siphoning effect. Use above the waterline on your head discharge system, bilge pump, the engine, gen-sets, air conditioners, ballast tanks or other equipment. Vented loops help make sure your boat stays afloat after the pumps are turned off.
Forespar Marelon 1-1/8" Vented Loop, Mf847 - 903018 - 108-903018F1
Vented loops are vital components to any onboard plumbing system reducing the risk of sinking or flooding. The glass reinforced composite Marelon™ Vented Loops allow air to enter the lines preventing that dangerous back siphoning effect. Use above the waterline on your head discharge system, bilge pump, the engine, gen-sets, air conditioners, ballast tanks or other equipment. Vented loops help make sure your boat stays afloat after the pumps are turned off.
Forespar Marelon 1-1/2" Vented Loop/Siphon Valve - 903000 - 108-903000F1
Vented loops are vital components to any onboard plumbing system reducing the risk of sinking or flooding. The glass reinforced composite Marelon™ Vented Loops allow air to enter the lines preventing that dangerous back siphoning effect. Use above the waterline on your head discharge system, bilge pump, the engine, gen-sets, air conditioners, ballast tanks or other equipment. Vented loops help make sure your boat stays afloat after the pumps are turned off.
Forespar Lightning Master™ (Static Dissipater) - 151100 - 108-151100F1
Lowers the exposure to a direct lightning strike by controlling the conditions which can trigger direct strikes, i.e. build-up of static ground charge and formation of ion streamers. Continually leaks off the ground potential in low amperages over a long period of time. The 21" long dissipater attaches with two machine screws to the masthead. For power or sailboats. From the same manufacturer which protects commercial broadcast and television towers.
Forespar Lanocote Prop & Bottom Protectant - 77035 - 108-770035F1
An economical alternative to more expensive foul release coatings, extensively tested LanoCote naturally sheds most marine organisms and has been shown to be effective for up to six months or longer. Outstanding as a foul release coating on props and shafts, LanoCote also works on small boat and inflatable boat bottoms. LanoCote is easily applied by hand, or when heated, by brush or short nap roller. Applied with a thickness of .020", one 16oz. jar covers about 10sq.ft. Effectiveness is regionally specific, based on water temperature and chemistry.
Forespar Cf253S Marelon Hose Tailpipe Mushroom Head Thru Hull W/Nut & Screen, White - 906031 - 108-906031F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.. Item number 906031 comes with screen.
Forespar Cf253 Marelon Hose Tailpipe Mushroom Head Thru Hull W/Nut, White - 906070 - 108-906070F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf253 Marelon Hose Tailpipe Mushroom Head Thru Hull W/Nut, White - 906032 - 108-906032F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf253 Marelon Hose Tailpipe Mushroom Head Thru Hull W/Nut, White - 906030 - 108-906030F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf253 Marelon Hose Tailpipe Mushroom Head Thru Hull W/Nut, White - 906028 - 108-906028F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf253 Marelon Hose Tailpipe Mushroom Head Thru Hull W/Nut, White - 906026 - 108-906026F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf253 Marelon Hose Tailpipe Mushroom Head Thru Hull W/Nut, White - 906024 - 108-906024F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf253 Marelon Hose Tailpipe Mushroom Head Thru Hull W/Nut, White - 906022 - 108-906022F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf252 Marelon Hose Adaptor/Tailpipe - 905011 - 108-905011F1
Made from high-strength, glass-reinforced Marelon. Perfect choice for joining hose lines to ball valves and seacocks.
Forespar Cf252 Marelon Hose Adaptor/Tailpipe - 905010 - 108-905010F1
Made from high-strength, glass-reinforced Marelon. Perfect choice for joining hose lines to ball valves and seacocks.
Forespar Cf252 Marelon Hose Adaptor/Tailpipe - 905009 - 108-905009F1
Made from high-strength, glass-reinforced Marelon. Perfect choice for joining hose lines to ball valves and seacocks.
Forespar Cf252 Marelon Hose Adaptor/Tailpipe - 905008 - 108-905008F1
Made from high-strength, glass-reinforced Marelon. Perfect choice for joining hose lines to ball valves and seacocks.
Forespar Cf252 Marelon Hose Adaptor/Tailpipe - 905007 - 108-905007F1
Made from high-strength, glass-reinforced Marelon. Perfect choice for joining hose lines to ball valves and seacocks.
Forespar Cf252 Marelon Hose Adaptor/Tailpipe - 905006 - 108-905006F1
Made from high-strength, glass-reinforced Marelon. Perfect choice for joining hose lines to ball valves and seacocks.
Forespar Cf251 Marelon Full Threaded Mushroom Head Thru Hull W/Nut, White - 906020 - 108-906020F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf251 Marelon Full Threaded Mushroom Head Thru Hull W/Nut, White - 906018 - 108-906018F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf251 Marelon Full Threaded Mushroom Head Thru Hull W/Nut, White - 906016 - 108-906016F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf251 Marelon Full Threaded Mushroom Head Thru Hull W/Nut, White - 906014 - 108-906014F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf251 Marelon Full Threaded Mushroom Head Thru Hull W/Nut, White - 906012 - 108-906012F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf251 Marelon Full Threaded Mushroom Head Thru Hull W/Nut, White - 906010 - 108-906010F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf250S Marelon Full Threaded, Screened, Flush Head Thru Hull W/Nut, White - 906009 - 108-906009F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft. 250S Model is fitted with a screen.
Forespar Cf250S Marelon Full Threaded, Screened, Flush Head Thru Hull W/Nut, White - 906003 - 108-906003F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft. 250S Model is fitted with a screen.
Forespar Cf250 Marelon Full Threaded Flush Head Thru Hull W/Nut, White - 906008 - 108-906008F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf250 Marelon Full Threaded Flush Head Thru Hull W/Nut, White - 906006 - 108-906006F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf250 Marelon Full Threaded Flush Head Thru Hull W/Nut, White - 906004 - 108-906004F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf250 Marelon Full Threaded Flush Head Thru Hull W/Nut, White - 906002 - 108-906002F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf250 Marelon Full Threaded Flush Head Thru Hull W/Nut, White - 906000 - 108-906000F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar 910168 Tailpipe - 1-1/4" Tapered Thread, 1-1/2" Hose - 910168 - 108-910168F1
Tailpipe, tapered male for use NC tapered female pipe fittings.
Forespar 910159 Tailpipe - 3/4" Tapered Thread, 3/4" Hose - 910159 - 108-910159F1
Tailpipe, tapered male for use NC tapered female pipe fittings.
Forespar 910158 Tailpipe - 3/4" Tapered Thread, 1/2" Hose - 910158 - 108-910158F1
Tailpipe, tapered male for use NC tapered female pipe fittings.
Forespar 910157 Tailpipe - 1/2" Tapered Thread, 3/4" Hose - 910157 - 108-910157F1
Tailpipe, tapered male for use NC tapered female pipe fittings.
Forespar 910156 Tailpipe - 1/2" Tapered Thread, 1/2" Hose - 910156 - 108-910156F1
Tailpipe, tapered male for use NC tapered female pipe fittings.
Forespar 910149 Tailpipe - 1/4" Tapered Thread, 1/2" Hose - 910149 - 108-910149F1
Tailpipe, tapered male for use NC tapered female pipe fittings.
Forespar 907027 Sw-7 Marelon Sink Waste 3/4" Straight - 907027 - 108-907027F1
Non corrosive plastic sink waste strainer.
Forespar 907022 Sw-6 Marelon Sink Waste 1", Straight - 907022 - 108-907022F1
Bright chrome plated, non corrosive plastic.
Forespar 907017 Sw-4 Marelon Sink Waste 1", 90° - 907017 - 108-907017F1
Bright chrome plated, non corrosive plastic.
Forespar 907015 Sw-3 Marelon Sink Waste 1-1/2", Straight - 907015 - 108-907015F1
Bright chrome plated, non corrosive plastic.
Forespar 907014 Sw-2 Marelon Sink Waste 1", 90° - 907014 - 108-907014F1
Non corrosive plastic sink waste strainer.
Forespar 907013 Sw-5 Marelon Sink Waste 3/4" Straight - 907013 - 108-907013F1
Non corrosive plastic sink waste strainer.
Forespar 907000 Sw-1 Marelon Sink Waste 1", Straight - 907000 - 108-907000F1
Non corrosive plastic sink waste strainer.
Forespar 906037 Model Cf254S 1-1/2" Flush T-Hull W/Screen - 906037 - 108-906037F1
254 series. Improved screen design with built-in strainer. White.
Forespar 906035 Model Cf254S 2" Flush T-Hull W/Screen - 906035 - 108-906035F1
254 series. Improved screen design with built-in strainer. White.
Forespar 905014 Female Threaded Barbed Fitting - 905014 - 108-905014F1
Manufactured from high impact resistant, glass reinforced Marelon®. All threads are NPSM.
Forespar 905013 Female Threaded Barbed Fitting - 905013 - 108-905013F1
Manufactured from high impact resistant, glass reinforced Marelon®. All threads are NPSM.
Forespar 905012 Female Threaded Barbed Fitting - 905012 - 108-905012F1
Manufactured from high impact resistant, glass reinforced Marelon®. All threads are NPSM.
Forespar 902018 Marelon Y-Valve, 1-1/8" Barbs - 902018 - 108-902018F1
Essential piece of equipment when the flow of water or other fluids are required to be diverted. Mounted to a bulkhead. Operated by a 120° movement.
Forespar 902017 Marelon Y-Valve, 3/4" Barbs - 902017 - 108-902017F1
Essential piece of equipment when the flow of water or other fluids are required to be diverted. Mounted to a bulkhead. Operated by a 120° movement.
Forespar 902001 Marelon Y-Valve, 1" Barbs - 902001 - 108-902001F1
Essential piece of equipment when the flow of water or other fluids are required to be diverted. Mounted to a bulkhead. Operated by a 120° movement.
Forespar 902000 Marelon Y-Valve, 1-1/2" Barbs - 902000 - 108-902000F1
Essential piece of equipment when the flow of water or other fluids are required to be diverted. Mounted to a bulkhead. Operated by a 120° movement.
Forespar 901014 Female Threaded Barbed Fitting - 901014 - 108-901014F1
Manufactured from high impact resistant, glass reinforced Marelon®. All threads are NPSM.
Forespar 901005 Marelon Male Elbow - 901005 - 108-901005F1
Made from high-strength glass-reinforced Marelon. Dimension 'A' indicates pipe thread size. All elbows sold in U.S.A. have straight pipe threads.
Forespar 8" Open Base Marelon® Cleat - 941015 - 108-941015F1
Molded from high-strength glass-reinforced Marelon®. The use of Marelon® allows our cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion. Will not soften on hot days or freeze in winter. Sold individually.
Forespar 770207 Tea Tree Power™ Mold & Odor Eliminator, 8 Oz. Spray - 770207 - 108-770207F1
Forespar's Tea Tree Power™ mold, mildew and odor eliminator is a non-toxic and bio-degradable air cleaner formulated with the highest concentration of 100% Australian Tea Tree Oil available to attack and degrade airborne spores while penetrating porous boat surfaces to eliminate the odor source. It maintains a healthy air quality and leaves a subtle, naturally clean scent throughout the boat. Not just a cover-up fragrance. Tea Tree Power™ Spray is an aerosol free pump bottle perfect for immediate odor control and mold & mildew cleanup.
Forespar 770206 Tea Tree Power™ Mold & Odor Eliminator, 22 Oz. Gel Refill, 2/Pk - 770206 - 108-770206F1
Forespar's Tea Tree Power™ mold, mildew and odor eliminator is a non-toxic and bio-degradable air cleaner formulated with the highest concentration of 100% Australian Tea Tree Oil available to attack and degrade airborne spores while penetrating porous boat surfaces to eliminate the odor source. It maintains a healthy air quality and leaves a subtle, naturally clean scent throughout the boat. Not just a cover-up fragrance. Tea Tree Power™ Gel is long lasting and provides continuous odor control, plus mold & mildew prevention for up to 3-months by simply opening and placing where needed.
Forespar 770205 Tea Tree Power™ Mold & Odor Eliminator, 22 Oz. Gel Refill, 1Ea. - 770205 - 108-770205F1
Forespar's Tea Tree Power™ mold, mildew and odor eliminator is a non-toxic and bio-degradable air cleaner formulated with the highest concentration of 100% Australian Tea Tree Oil available to attack and degrade airborne spores while penetrating porous boat surfaces to eliminate the odor source. It maintains a healthy air quality and leaves a subtle, naturally clean scent throughout the boat. Not just a cover-up fragrance. Tea Tree Power™ Gel is long lasting and provides continuous odor control, plus mold & mildew prevention for up to 3-months by simply opening and placing where needed.
Forespar 770204 Tea Tree Power™ Mold & Odor Eliminator, 16 Oz. Gel - 770204 - 108-770204F1
Forespar's Tea Tree Power™ mold, mildew and odor eliminator is a non-toxic and bio-degradable air cleaner formulated with the highest concentration of 100% Australian Tea Tree Oil available to attack and degrade airborne spores while penetrating porous boat surfaces to eliminate the odor source. It maintains a healthy air quality and leaves a subtle, naturally clean scent throughout the boat. Not just a cover-up fragrance. Tea Tree Power™ Gel is long lasting and provides continuous odor control, plus mold & mildew prevention for up to 3-months by simply opening and placing where needed.
Forespar 770203 Tea Tree Power™ Mold & Odor Eliminator, 8 Oz. Gel - 770203 - 108-770203F1
Forespar's Tea Tree Power™ mold, mildew and odor eliminator is a non-toxic and bio-degradable air cleaner formulated with the highest concentration of 100% Australian Tea Tree Oil available to attack and degrade airborne spores while penetrating porous boat surfaces to eliminate the odor source. It maintains a healthy air quality and leaves a subtle, naturally clean scent throughout the boat. Not just a cover-up fragrance. Tea Tree Power™ Gel is long lasting and provides continuous odor control, plus mold & mildew prevention for up to 3-months by simply opening and placing where needed.
Forespar 770202 Tea Tree Power™ Mold & Odor Eliminator, 4 Oz. Gel - 770202 - 108-770202F1
Forespar's Tea Tree Power™ mold, mildew and odor eliminator is a non-toxic and bio-degradable air cleaner formulated with the highest concentration of 100% Australian Tea Tree Oil available to attack and degrade airborne spores while penetrating porous boat surfaces to eliminate the odor source. It maintains a healthy air quality and leaves a subtle, naturally clean scent throughout the boat. Not just a cover-up fragrance. Tea Tree Power™ Gel is long lasting and provides continuous odor control, plus mold & mildew prevention for up to 3-months by simply opening and placing where needed.
Forespar 770201 Tea Tree Power™ Mold & Odor Eliminator, 2 Oz. Gel - 770201 - 108-770201F1
Forespar's Tea Tree Power™ mold, mildew and odor eliminator is a non-toxic and bio-degradable air cleaner formulated with the highest concentration of 100% Australian Tea Tree Oil available to attack and degrade airborne spores while penetrating porous boat surfaces to eliminate the odor source. It maintains a healthy air quality and leaves a subtle, naturally clean scent throughout the boat. Not just a cover-up fragrance. Tea Tree Power™ Gel is long lasting and provides continuous odor control, plus mold & mildew prevention for up to 3-months by simply opening and placing where needed.
Forespar 6-1/2" Open Base Marelon® Cleat - 941014 - 108-941014F1
Molded from high-strength glass-reinforced Marelon®. The use of Marelon® allows our cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion. Will not soften on hot days or freeze in winter. Sold individually.
Forespar 5" Open Base Marelon® Cleat - 941013 - 108-941013F1
Molded from high-strength glass-reinforced Marelon®. The use of Marelon® allows our cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion. Will not soften on hot days or freeze in winter. Sold individually.
Forespar 407101 Adj 7-15-Dl Heavy Duty Telescoping Twist Lock Pole - 407101 - 108-407101F1
Heavy duty aluminum whisker pole can be extended and securely locked in position by an internal twist lock device. Features self-latching fittings on the inboard and outboard ends. End fittings are Ultra Series end fittings for superior strength. Use Pad Eye #400002, PE-3SC (Curved Base). Two sections, 1-7/8" outer tube diameter. With self-latching fittings on both ends.
Forespar 4" Open Base Marelon® Cleat - 941016 - 108-941016F1
Molded from high-strength glass-reinforced Marelon®. The use of Marelon® allows our cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion. Will not soften on hot days or freeze in winter. Sold individually.
Forespar 339008 T-Track, 1-1/4" X 10' - 339008 - 108-339008F1
Clear anodized aluminum. Track comes pre-drilled with alternating pin-stop and mounting holes. The base of the track is gently curved to better accommodate mast surfaces. Uses 5/16" x 3/4" Stainless Steel Flathead Machine Screws. For use with Forespar cars. 4" Hole spacing with "pin stop" holes.
Forespar 333004 T-125-S Toggle Car Slide - 333004 - 108-333004F1
Stainless steel body and toggle-pin. Our strong 1-1/4" toggle spinnaker car is for boats approx. 50' to 70' LOA. Fits the standard Schaefer 41-12 1-1/4" track. low friction movement due to UHMW inserts. For use with Auto Socket TS & UTS ends. Standard toggle works with poles to 4-1/2" diameter. Does not fit Lewmar T-track.
Forespar 332002 Fc-125 Heavy Duty Car - 332002 - 108-332002F1
Allows both vertical and horizontal movement while eliminating undesirable twisting motion of the spinnaker pole. The car slide is a high strength, stainless steel car body. The pole acceptance jaw is stainless steel. Fits all standard 1-1/4" x 3/16" flat stainless or aluminum T-track.Recommended for 'UTR' and 'UXP' type spinnaker pole ends. Recommended for UTR and UXP type spinnaker pole ends.
Forespar 3" Open Base Marelon® Cleat - 941018 - 108-941018F1
Molded from high-strength glass-reinforced Marelon®. The use of Marelon® allows our cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion. Will not soften on hot days or freeze in winter. Sold individually.
Forespar 132300 Ml-2 Combination Deck-Steaming Led Light With Separate Switching (To Be Mounted On Forward Part Of Mast) 12V - 132300 - 108-132300F1
LED combination deck-bow light with separate switching to be mounted on the forward part of the mast. For yachts up to 65'Measures 5-3/4" high, Weighs 7 oz.6" Twin lead wire
Forespar 131300 Ml-1 Spreader Deck Mast Light, Led - 131300 - 108-131300F1
Forespar® Model ML-1 is a deck light designed for optimum illumination of your deck. Engineered primarily for installation on the mast just below the spreaders. Easily mounted on other locations on masts and superstructure. Lightweight - Rugged Composite MaterialAdaptable to Mast Radius for Ease in MountingProvided with 6" of Twin-Lead WireBlack Molded Polymer Body
Forespar 104017 Twist Lock Tiller Extension - 104017 - 108-104017F1
TFP quick release. Incorporates a special universal joint machined from stainless steel. Securely fastened to the anodized 3/4" -5/8" diameter aluminum tubing is an easy-to-hold rubber compound ball grip. Powder coated finish. Instantly fastens to the tiller by simply depressing the plunger and inserting the detent pin into the special tubular fitting supplied. An easy push on the plunger and the hiking stick is released from the tiller. It's fast, simple and secure.
Forespar 104016 Twist Lock Tiller Extension - 104016 - 108-104016F1
TFP quick release. Incorporates a special universal joint machined from stainless steel. Securely fastened to the anodized 3/4" -5/8" diameter aluminum tubing is an easy-to-hold rubber compound ball grip. Powder coated finish. Instantly fastens to the tiller by simply depressing the plunger and inserting the detent pin into the special tubular fitting supplied. An easy push on the plunger and the hiking stick is released from the tiller. It's fast, simple and secure.
Forespar 1/2" Female Connector - 901045 - 108-901045F1
Made from high strength glass-reinforced Marelon®.
Forespar 1" Y-Connector W/Flange - 902002 - 108-902002F1
Y Connectors can be used for connecting fluid lines. End plate may be removed for blockage relief etc. O-ring seal ensures leak free performance and is safe under pressure working conditions up to 40 P.S.I. Made of fiber reinforced Marelon®.
Forespar 1" Stanchion Mounted Pole Chock, 2-1/2" - 300042 - 108-300042F1
Clear the decks! Now you can stop stumbling over deck mounted poles. These chocks are molded from durable, weather-resistant urethane and mount easily onto 1" stanchions - no drilling necessary. For poles 2" to 3-1/2" in diameter. (Chocks are sold individually - two chocks are needed for each pole.) For spinnaker or whisker poles. Ideal for reaching struts!
Forespar 1-1/2" To 1-1/4" Male Reducer - 901048 - 108-901048F1
Made from high strength glass-reinforced Marelon®.
Forespar 1-1/2" Male To 1" Female Reducer - 910062 - 108-910062F1
Made from high strength glass-reinforced Marelon®.
8 Oz. Spray Bottle Of Lanocote - 770007 - 108-770007F1
A safe and natural product that stops and prevents rust, oxidation and electrolysis. Available as a wipe-on paste, it is the perfect corrosion solution for environmentally sensitive marine locations. Formulated to withstand both fresh and salt water, Lanocote forms a long-lasting, non-greasy moisture barrier on all treated parts. It is effective on almost anything that is prone to corrosion including shackles, electric panels, valves, threads, outboards and fishing tackle.
4 Oz. Jar Of Lanocote Corrosion - 770001 - 108-770001F1
A safe and natural product that stops and prevents rust, oxidation and electrolysis. Available as a wipe-on paste, it is the perfect corrosion solution for environmentally sensitive marine locations. Formulated to withstand both fresh and salt water, Lanocote forms a long-lasting, non-greasy moisture barrier on all treated parts. It is effective on almost anything that is prone to corrosion including shackles, electric panels, valves, threads, outboards and fishing tackle.
1 1/8 Hose Adapter - 905016 - 108-905016F1
Made from high-strength, glass-reinforced Marelon. Perfect choice for joining hose lines to ball valves and seacocks.
