Mercury/Quicksilver Reman
2-Stroke Outboard Remanufactured Gearcase Assembly - 859399T13 - 714-1623-859399T13 Superseded By: 710-1623-8M0236231F1
383 Mag Stroker Remanufacturered Plus-Series Engine - 865108R80 - 714-865108R80 Superseded By: 714-8M0188296F1
Plus-Series EngineHot Tested by supplying fuel and coolant so technicians can perform a series of live-running tests for quality assurance. All engines are completely remanufactured and include exhaust manifolds, fuel, electrical and ignition systems so they are ready to rig into a boat. Mercury Remanufactured engines come with a one-year factory limited warranty. Considerations:To avoid the expense of a fully-dressed complete engine, the following items (if in good condition) need to be transferred from the original engine overto the replacement engine: exhaust manifolds, risers, starter motor, alternator, pulleys hoses and beltsInstalling a partially dressed engine into a 1981 or earlier application would not be recommended. Due to the shift bracket that contains a reverse lockmechanism, it would be extremely difficult and expensive to accomplish this upgradeThis product category may require a Core/Container Deposit.
Alpha Gen 2 1.47 C/R - 5111200Tp - 714-5-5111200Tpf1
Alpha One Gen II Compete Sterndrive Unit.
Alpha Gen 2 1.47 Std - 5121200Tp - 714-5-5121200Tpf1
Alpha One Gen II Compete Sterndrive Unit.
Alpha Gen 2 1.62 C/R - 5111300Tp - 714-5-5111300Tpf1
Alpha One Gen II Compete Sterndrive Unit.
Alpha Gen 2 1.62 Std - 5121300Tp - 714-5-5121300Tpf1
Alpha One Gen II Compete Sterndrive Unit.
Alpha Gen 2 1.81 C/R - 5111400Tp - 714-5-5111400Tpf1
Alpha One Gen II Compete Sterndrive Unit.
Alpha Gen 2 1.81 Std - 5121400Tp - 714-5-5121400Tpf1
Alpha One Gen II Compete Sterndrive Unit.
Bravo Digital Transom W/O Eng Repl. P/N 710-6-62000010P - 62000010P - 714-6-62000010Pf1
Bravo I Drive 1.65/1 Dwp - 5231300Tp - 714-5-5231300Tpf1
New and fresh from the factory, the classic Bravo sterndrive look is still available on selected p/n's. They freature all of the latest improvements to the cone clutch and machining imporvements that make Bravo sterndrives best in class for shift smoothness and durable performance. Includes dual water pickup.
Bravo Three Sterndrive - Seacore - 5L41500Tp - 714-5-5L41500Tpf1
Bravo Three Sterndrive - Seacore - 5L41600Tp - 714-5-5L41600Tpf1
Bravo Two Plus Complete Outdrive - 5331500Tp - 714-5-5331500Tpf1
Bravo Two Plus Complete Outdrive - 5331600Tp - 714-5-5331600Tpf1
Complete Gear Housing - Alpha One - 8951A43 - 714-1623-8951A43F1
Cpo 6.2L 300 B Ec Dts 2R Eo - - 714-8A620062U Superseded By: 713-8A620062Uf1
Cpo 6.2L 350 B Ec Dts 2R Eo - - 714-8A620073U Superseded By: 713-8A620073Uf1
Cpo Gc L6 5.44 Xl Sil 1.75 Replaces Pn 710-1600-8M0235773 - 8M0235773 - 714-1600-8M0235773F1
Cpo Gc V6 4.8 L Sil 1.85 Replaces Pn 710-1600-8M0235783 - 8M0235783 - 714-1600-8M0235783F1
Cpo Gc V6 5.44 Xl Blk 1.85 Sp Call Epc Rep To Special Order_ - 8M0159725 - 714-1600-8M0159725F1
Cpo Gc V6-1.85-Xl Replaces Pn 710-1600-8M0235778 - 8M0235778 - 714-1600-8M0235778F1
Cpo Gc V8 5.44 Cxl Sil 1.75 Sp Call Epc Rep To Special Order_ - 8M0159738 - 714-1600-8M0159738F1
Cpo Gc V8 5.44 L Sil 1.85 Replaces Pn 710-1600-8M0235781 - 8M0235781 - 714-1600-8M0235781F1
Cpo Gc V8 5.44 L Sil Hd 1.75 Call Epc Rep To Special Order_ - 8M0159741 - 714-1600-8M0159741F1
Cpo Gc V8 5.44 Xxl Sil 1.85 Replaces Pn 710-1600-8M0235777 - 8M0235777 - 714-1600-8M0235777F1
Cpo Gc V8-175-L Replaces Pn 710-1600-8M0235770 - 8M0235770 - 714-1600-8M0235770F1
Cpo Gc V8-175-Xl Replaces Pn 710-1600-8M0235776 - 8M0235776 - 714-1600-8M0235776F1
Cpo Gc V8-175-Xl Replaces Pn 710-1600-8M0235785 - 8M0235785 - 714-1600-8M0235785F1
Cpo Gc V8-185-Cxl Replaces Pn 710-1600-8M0235774 - 8M0235774 - 714-1600-8M0235774F1
Cpo Gc V8-185-Xl Replaces Pn 710-1600-8M0235772 - 8M0235772 - 714-1600-8M0235772F1
Cpo Gc Verxxl5.44 Replaces Pn 710-1600-8M0235775 - 1600-8M0235775 - 714-1600-8M0235775F1
Cpo Gc-2.1L Proxs S 2.38 L Ct Call Epc Rep To Special Order_ - 8M0189258 - 714-1600-8M0189258F1
Cpo Gc-5.4 Pnla Replaces Pn 710-1600-8M0235784 - 8M0235784 - 714-1600-8M0235784F1
Cpo-B1 1.65L Subject To Availability Do Not Backorder Or Spec Order - 896346413 - 714-896346413F1
Cpo-B2 2.00L Subject To Availability Do Not Backorder Or Spec Order - 896346422 - 714-896346422F1
Cpo-B3 2.20E Subject To Availability Do Not Backorder Or Spec Order - 896346426 - 714-896346426F1
Engine-383 Mie-Rm Replaces P/N 710-8M0225727 - 8M0225727 - 714-8M0225727F1
Gas Bravo I X 1.50/1 - 5237200Tp - 714-5-5237200Tpf1
New and fresh from the factory, the classic Bravo sterndrive look is still available on selected p/n's. They freature all of the latest improvements to the cone clutch and machining imporvements that make Bravo sterndrives best in class for shift smoothness and durable performance. Includes dual water pickup.
Gear Housing Assembly-Alpha Gen Ii - 815822A53 - 714-1623-815822A53F1
Lb 5.7L-Rm 96-Up Same As 807449R50 - 807449R60 - 714-807449R60F1
Qs Alpha 1.47 Drive Replaces Pn 710-5-51100008P - 51100008P - 714-5-51100008Pf1
Qs Bravo I Drv 1.50:1 Dwp Replaces P/N 710-5-52100004P - 52100004P - 714-5-52100004Pf1
Qs Bravo Iii Drv 2.20:1 Replaces P/N 710-5-52300002P - 52300002P - 714-5-52300002Pf1
Qs Lb 357 Alpha Replaces Pn 710-8M0187375 - 8M0187375 - 714-8M0187375F1
Qs Univ Renewal Replaces P/N 710-90-8M0187282 - 8M0187282 - 714-90-8M0187282F1
Qs Univ Seat "Non Returnable" Lns Min Ord Qty Of 25 - 8M0175481 - 714-90-8M0175481F1
Quicksilver 1600-880686T14 Gear Housing Assembly Complete - 6 Cyl. Verado - 880686T14 - 714-1600-880686T14 Superseded By: 714-1600-8M0236256F1
6 Cyl Verado w/4.80" torpedo diameter. 25" (XL model) driveshaft, RH rotation.
Quicksilver 1600-880686T24 Gear Housing Assembly Complete - 4 Cyl. Verado - 880686T24 - 714-1600-880686T24 Superseded By: 714-1600-8M0236262F1
4 Cyl Verado, 25" (XL model) driveshaft, RH rotation.
Quicksilver 1600-8M0099218 Gearcase Assembly, Complete - 4 Cyl - 8M0099218 - 714-1600-8M0099218F1
Black, 1:92:1 gear ratio. 20" long shaft length. 13 pinion teeth. Fits Mercury 150 hp 4-Cylinder, 4-Stroke Outboards.
Quicksilver 51100007P Alpha One Gen Ii Sterndrive - New - 51100007P - 714-5-51100007Pf1
Quicksilver now offers 100% new, OEM-quality replacement sterndrives and transoms for MerCruiser, Quicksilver and Mercury Remanufacturing sterndrive engines without an engine mounted seawater pump. Value repower doesn't mean compromise, as these systems are manufactured to exacting standards that deliver durable, quiet, and reliable performance. A Quicksilver Repower Reference Manual that covers all aspects of proper application and installation is included with each unit. Each unit comes with one year of P&A limited warranty. Quicksilver delivers performance, protection, and peace of mind.Using proprietary forged gear sets, Quicksilver Alpha One Gen II sterndrives provide years of durable and quiet operation for a safe and sophisticated boating experience like none other. Compatible with Flo-Torque II hubs & engines using remote drive lube reservoirs to protect your investment. Quicksilver sterndrives feature: perma-lube U-joints, corrosion resistant XK-360 alloy, a tri-paint protection system, stainless steel shafts, ultra-pure aluminum anodes and a genuine Quicksilver water pump impeller. Choose Quicksilver original parts because everything is riding on it. Use of Quicksilver High Performance Gear Lube is recommended to prevent corrosion and pitting. 2.00:1 ratioStandard Rotation (RH)Recommended for single installation 3.0L Alpha sterndrive engines up to 150 HP used in runabouts & pontoon boats. Not for use at high-altitudes (5,000.+)
Quicksilver 6-61000004P Transom Assembly Alpha One Gen Ii - New - 61000004P - 714-6-61000004Pf1
Quicksilver now offers 100% new, OEM-quality replacement sterndrives and transoms for MerCruiser, Quicksilver and Mercury Remanufacturing sterndrive engines without an engine mounted seawater pump. Value repower doesn't mean compromise, as these systems are manufactured to exacting standards that deliver durable, quiet, and reliable performance. A Quicksilver Repower Reference Manual that covers all aspects of proper application and installation is included with each unit. Each unit comes with one year of P&A limited warranty. Quicksilver delivers performance, protection, and peace of mind.Using proprietary forged gear sets, Quicksilver Alpha One Gen II sterndrives provide years of durable and quiet operation for a safe and sophisticated boating experience like none other. Compatible with Flo-Torque II hubs & engines using remote drive lube reservoirs to protect your investment. Quicksilver sterndrives feature: perma-lube U-joints, corrosion resistant XK-360 alloy, a tri-paint protection system, stainless steel shafts, ultra-pure aluminum anodes and a genuine Quicksilver water pump impeller. Choose Quicksilver original parts because everything is riding on it. Use of Quicksilver High Performance Gear Lube is recommended to prevent corrosion and pitting.A transom is one of the most important components powering a sterndrive boat because of the many critical systems that it manages: Steering actuationTrim control, sensing, and limitExhaust managementCooling water handlingCorrosion controlThe important function of keeping water out of the boat For use with single or twin engine installations in boats up to 65 MPH using gas engines up to 300 HP using the Alpha One Gen II sterndrive.
Quicksilver 6-61000005P Transom Assembly Alpha One Gen Ii - New - 61000005P - 714-6-61000005Pf1
Includes complete power trim pump.Quicksilver now offers 100% new, OEM-quality replacement sterndrives and transoms for MerCruiser, Quicksilver and Mercury Remanufacturing sterndrive engines without an engine mounted seawater pump. Value repower doesn't mean compromise, as these systems are manufactured to exacting standards that deliver durable, quiet, and reliable performance. A Quicksilver Repower Reference Manual that covers all aspects of proper application and installation is included with each unit. Each unit comes with one year of P&A limited warranty. Quicksilver delivers performance, protection, and peace of mind.Using proprietary forged gear sets, Quicksilver Alpha One Gen II sterndrives provide years of durable and quiet operation for a safe and sophisticated boating experience like none other. Compatible with Flo-Torque II hubs & engines using remote drive lube reservoirs to protect your investment. Quicksilver sterndrives feature: perma-lube U-joints, corrosion resistant XK-360 alloy, a tri-paint protection system, stainless steel shafts, ultra-pure aluminum anodes and a genuine Quicksilver water pump impeller. Choose Quicksilver original parts because everything is riding on it. Use of Quicksilver High Performance Gear Lube is recommended to prevent corrosion and pitting.A transom is one of the most important components powering a sterndrive boat because of the many critical systems that it manages: Steering actuationTrim control, sensing, and limitExhaust managementCooling water handlingCorrosion controlThe important function of keeping water out of the boat
Quicksilver 61-8M0162891 L6 Verado Dressed Powerhead - Remanufactured - 8M0162891 - 714-61-8M0162891F1
Remanufactured outboard 4-Stroke longblock and supercharger. 100% new dress parts. Supercharged 4-Stroke inline-6 engine technology supporting 200-300 HP. Generation V. PCM is not included. Re-use PCM or order separately.
Quicksilver 8M0114790 4.5L / V6 Mercury Longblock Assenbly - New - 8M0114790 - 714-8M0114790F1
Brand *NEW* Longblock Mercury 6 Cyl., 4.5 Liter 275 V6
Quicksilver 8M0114814 6.2L / V8 Mercury Longblock Assembly - New - 8M0114814 - 714-8M0114814F1
Brand *NEW* Longblock Mercury 8 Cyl., 6.2 Liter 377 V8
Quicksilver 8M0187349 4.3L Alpha 4V Remanufactured Engine - 8M0187349 - 714-8M0187349F1
4.3L Alpha 4V EST Sterndrive Engine Only. 225 HP @ 4600 RPM, 4.3 Liter Fully Dressed Marine Engine. Engine Features: Special Flame Graphics, 600 cfm 4bbl Carburetor, Exclusive High-Torque Aluminum Intake Manifold with Bronze Water Crossover & Pads, Electric Fuel Pump, 2-Piece Wet Joint Exhaust, Nodular Iron Crankshaft, Billet Steel Roller Camshaft, Vortec Cast Iron Cylinder Heads, Stainless Steel Valves, 1.5:1 Roller Rocker Arms, EST Analog Ignition, 10-Pin Harness. Runs on 87 Octane Fuel. Replaces MerCruiser 4.3L & 5.0L sterndrive engines.
Quicksilver 8M0187350 3.0L Crate Engine - New - - 714-8M0187350 Superseded By: 713-8M0187350F1
This all-new construction 3.0L crate engine is for all makes of inboard and sterndrive 3.0L marine carbureted engines built since 1990 & up. It requires the installation of a 14" flywheel. A refurbished 14" flywheel 8M0135884 is available separately. 135 HP @ 4800 RPM. 181 cubic inch partially dressed marine engine. Engine Features: Turn Key Start Carburetor with Mechanical Fuel Pump and Flame Arrestor. Built with 100% new Quicksilver: cast iron block, large fillet radii crankshaft, Tri-metal bearings, 9.3:1 hypereutectic pistons, revised TKS carburetor calibration, and 1.5:1 rocker arms. Quicksilver cylinder heads feature: hardened seats, screw in studs, Black-X valves & an exclusive Quicksilver combustion chamber allowing 4 deg BTDC base timing. Content includes harmonic balancer, thermostat housing with 140F degree thermostat, NGK spark plugs, marine distributor, plug wires, exhaust elbow, sensors, audio warning horn for overheat, low oil pressure, and low drive lube levels. It uses EST Analog Ignition, includes shift bracket for shift interrupt, and 14-pin Harness. Compatible with front or side engine mounts. Pilot bore machined into crankshaft to accept dealer installed Volvo couplers. Runs on 87 Octane Fuel.
Quicksilver 8M0187364 3.0L 4 Cylinder Long Block Assembly - New - 8M0187364 - 714-8M0187364F1
Quicksilver 3.0L Alpha, 135 HP 100% New Quicksilver Marine & Industrial LMX Engine, Replaces all makes of 1990 & up marine & LMX industrial engines not using dedicated MPI heads. Applications include: 1990-1997 3.0L LX engines (SN 0C856599 - 0K999999) 1998 & up 3.0L carbureted & MC 3.0 MPI (0L010042 & up). Quicksilver Value Series Longblock 4 Cylinder 3.0 Liter, 181 Inline-4(Left-Hand Standard Rotation) 100% New Content Quicksilver Engine features: cast iron block, large fillet radii crankshaft, Tri-metal bearings, 9.3:1 hypereutectic pistons, and 1.5:1 rocker arms. Quicksilver cylinder head feature: hardened seats, screw in studs, Black-X valves & an exclusive Quicksilver combustion chamber allowing 4 deg BTDC base timing. Content includes harmonic balancer, oil pan, & valve cover. Compatible with front or side engine mounts. Pilot bore machined into crankshaft to accept dealer installed Volvo couplers. No provision for cylinder head mounted fuel injectors.
Quicksilver 8M0187365 5.7L / V-8 Long Block Assembly - New - 8M0187365 - 714-8M0187365F1
Quicksilver Value Series Longblock 8 Cylinder, 5.7 Liter 300HP, 350 V-8 (Left-Hand Standard Rotation) 100% New Content.Does not include provisions for a mechanical fuel pump. Engine features: Cast iron block, nodular iron crankshaft, single-piece rear main seal, roller camshaft, marine oil pan, high flow oil pump, harmonic balancer and CPS included. Quicksilver cast iron cylinder heads include: hardened seats, screw in studs, & Black-X valves. Replaces all makes of 1996-2015 5.7L Gen+ marine engines using an 8-bolt intake manifold with standard marine camshaft for 4600-5000 RPM range. 1996-2015 5.7L Gen+ Carbureted or Throttle Body Fuel Injected EFI sterndrive and inboard engines 2001-2004 MCM 350 Mag MPI engines (SN 0M300000 - 0W309999), 2001-2004 MIE 350 Mag MPI engines (SN 0M300000 - 0W389999)
Quicksilver 8M0187366 5.7L / V-8 Long Block Assembly - New - 8M0187366 - 714-8M0187366F1
Quicksilver Value Series Longblock 8 Cylinder, 5.7 Liter 300HP, 350 V-8 (Left-Hand Standard Rotation) 100% New Content.Does not include provisions for a mechanical fuel pump. Engine features: Cast iron block, nodular iron crankshaft, single-piece rear main seal, roller camshaft, marine oil pan, high flow oil pump, harmonic balancer and CPS included. Quicksilver cast iron cylinder heads include: hardened seats, screw in studs, & Black-X valves. Application Replaces all makes of 1996-2015 5.7L Gen+ marine engines using an 8-bolt intake manifold with standard marine camshaft for 4600-5000 RPM range. 2005-2015 MCM/MIE 350 Mag & 5.7L MPI engines (SN 0W310000 & up), Quicksilver 350 MPI Alpha, Bravo, Inboard, & Tow, Volvo 5.7Gi-300-J EFI model
Quicksilver 8M0187368 6.2L / V8 Mercury Longblock Assembly - New - 8M0187368 - 714-8M0187368F1
Brand *NEW* Longblock Mercury 8 Cyl., 6.2 Liter 377 V8 Application GM 6.2 Liter Gen+ 377 V8 Left-Hand / Standard Rotation. Replaces 2002-2009 MerCruiser 6.2L MPI Multi=Port Fuel Injected sterndrive and inboard marine engines w/o ECT. This block has provisions for a CPS (Crank Position Sensor). There are no provisions for a mechanical fuel pump. It uses a proprietary 6.2L MerCruiser roller camshaft profile used during the years listed (S/N 0M300000-1A353300)
Quicksilver 8M0188294 4.3L / V-6 Remanufactured Pro-Series Long Block Assembly - 8M0188294 - 714-8M0188294F1
Remanufactured PRO-Series Longblock GM 6 Cyl., 4.3 Liter Gen+ 262 V6 (Left-Hand Standard Rotation) with remanufactured Vortec cylinder heads. Replaces 2000-2007 GM 4.3L balance?shaft marine carb or MPI engines with electric fuel pumps, roller rocker?arms and crank position sensor.NOTE 1: May also require the harmonic balancer p/n 888776T to be ordered separately when replacing carbureted engines w/o the crank position sensor.NOTE 2: Can be used to repair CARBURETED ONLY 2007?2016 GM 4.3L balance?shaft marine engines with 58X crankshaft timing wheel, electric fuel pumps, roller rocker?arms, crankshaft position sensor. NOT FOR USE with MPI models (SN# 1A063240 and up).
Quicksilver 8M0188300 3.0L Cylinder Head Assembly - New - 8M0188300 - 714-8M0188300F1
1990-2016 MCM 3.0L, 3.0LX, & 3.0L MPI 3.0L Industrial. All new Quicksilver cast iron cylinder head, hardened valve seats press fit into the cylinder head with stainless steel valves featuring seats treated with a cobalt-chromium alloy for extreme durability. This cylinder head features screw-in rocker studs. Smaller ports are updated to the latest design to deliver more power. No provision for in port fuel injector for non-MerCruiser applications.
Quicksilver 8M0188302 5.7L/6.2L Cylinder Head Assembly - New - 8M0188302 - 714-8M0188302F1
1996-2016 MCM/MIE 5.7L using Gen+ heads, 2000-2008 MCM/MIE 6.2L using Gen+ heads, 350 Alpha Quicksilver Crate Engines - Carb & MPI, 357 Horizon MIE Plus Series Engines, 357 Alpha & 383 MPI Plus Series engines, 1996-2002 5.7L L31 Gen 1e RV, automotive & truck , 1996-2016 5.7L L31 Gen 1e industrial. All new Quicksilver cast iron cylinder head, hardened valve seats press fit into the cylinder head with stainless steel valves featuring seats treated with a cobalt-chromium alloy for extreme durability. This fits 5.7L & 6.2L engines with an 8-bolt intake manifold. This cylinder head features screw-in rocker studs.
Quicksilver 8M0188308 Down-Angle Inboard Transmission Assembly - New - 8M0188308 - 714-8M0188308F1
Completely dressed, brand new Inboard Transmission. Includes oil cooler, hoses and mounting harware. Standard (right-hand) Rotation
Quicksilver 8M0188309 Down-Angle Inboard Transmission Assembly - New - 8M0188309 - 714-8M0188309F1
Completely dressed, brand new Inboard Transmission. Includes oil cooler, hoses and mounting harware. Standard (right-hand) Rotation
Quicksilver 8M0188310 Down-Angle Inboard Transmission Assembly - New - 8M0188310 - 714-8M0188310F1
Completely dressed, brand new Inboard Transmission. Includes oil cooler, hoses and mounting harware. Standard (right-hand) Rotation
Quicksilver 8M0188312 V-Drive Inboard Transmission Assembly - New - 8M0188312 - 714-8M0188312F1
Completely dressed, brand new Inboard Transmission. Includes oil cooler, hoses and mounting harware. Standard (right-hand) Rotation
Quicksilver 8M0188313 V-Drive Inboard Transmission Assembly - New - 8M0188313 - 714-8M0188313F1
Completely dressed, brand new Inboard Transmission. Includes oil cooler, hoses and mounting harware. Standard (right-hand) Rotation
Quicksilver Complete Driveshaft Housing - Alpha One Gen Ii - 861063A10 - 714-1547-861063A10F1
Complete Driveshaft Housing - Alpha One Gen II
Quicksilver Complete Gear Housing - Bravo Ii - 8294A16 - 714-1641-8294A16F1
Complete Gear Housing - Bravo II
Quicksilver Gearcase Assembly Complete - Mercury V6 O/B - 9148T84 - 714-1647-9148T84F1
Fits Mercury 135-200 (2.5L) V-6 outboards
Quicksilver Gearcase Assembly Complete - Mercury V6 O/B - 9148T85 - 714-1647-9148T85F1
Fits Mercury 135-200 (2.5L) V-6 outboards
Quicksilver Mercury/Mariner V-250 Pro Xs Dressed Powerhead - 8M0125790 - 714-61-8M0125790F1
Remanufactured outboard powerhead, 100% new dress parts. Direct Fuel Injection technology.
Quicksilver Outboard Gearcase Assembly - 859399T14 - 714-1623-859399T14 Superseded By: 710-1623-8M0236242F1
Fits Mercury or Mariner 200, 225, 250 horsepower 3.0L OptiMax/DFI outboards. (s/n 1B504988 and prior).
Quicksilver Xxx 350 Bravo Engine Assembly - - 714-8M0187351 Superseded By: 713-8M0187351F1
300 HP @ 5000 RPM - Standard / Left-Hand rotation. Brand New 350 cubic inch partially dressed marine engine assembly. Feature include: New 75mm TBU, 2-piece aluminum intake manifold with iron base, new fuel injector & rail assembly, TPS & TMAP sensors, HVS assembly, nodular iron crankshaft, roller camshaft, Quicksilver iron cylinder heads, screw-in rocker studs, stainless steel valves, 9.4:1 hypereutectic pistons. 300 HP New Crate Engine Not just a service replacement.Includes: Harmonic balancer, oil pan, circulating water pump, NGK spark plugs, wires and crank sensor. Runs on 87 Octane Fuel.
Quicksilver Xxx 350 Bravo Engine Assembly - - 714-8M0187352 Superseded By: 713-8M0187352F1
300 HP @ 5000 RPM - Standard / Left-Hand rotation. Brand New 350 cubic inch partially dressed marine engine assembly. Feature include: New 75mm TBU, 2-piece aluminum intake manifold with iron base, new fuel injector & rail assembly, TPS & TMAP sensors, HVS assembly, nodular iron crankshaft, roller camshaft, Quicksilver iron cylinder heads, screw-in rocker studs, stainless steel valves, 9.4:1 hypereutectic pistons. 300 HP New Crate Engine Not just a service replacement. Includes: Harmonic balancer, oil pan, circulating water pump, NGK spark plugs, wires and crank sensor. Runs on 87 Octane Fuel.
Quicksilver Xxx 8.1L / 496 V-8 Long Block Assembly - New - 8M0187377 - 714-8M0187377F1
Quicksilver Value Series Longblock. 8 Cylinder 8.1 Liter, 496 V-8 (Left-Hand Standard Rotation) 100% New Content. Replaces 2001 & up 496 Mag & 8.1L Horizon MerCruiser, Mercury Remanufacturing, & Quicksilver base engines. Also this service block can be used with other makes. Engine Features: Heavy Duty Iron Block with Splayed 4-bolt Main Bearing Caps, Priority Main Oiling System, 8.6:1 Hypereutectic Pistons, Roller Camshaft, 1.7:1 Rocker Arms, Forged Steel Crankshaft, and billet oil adapter. Quicksilver Iron Cylinder Heads feature Black-X Valve Technology, hardened seats, and shot peened marine valve springs.
Rm 383 Mpi Bravo Engine Replaces P/N 710-8M0188296 - 8M0188296 - 714-8M0188296F1
Rm Ph-Drss V8 Cms Replaces P.N 710-61-8M0206534 - 8M0206534 - 714-61-8M0206534F1
Rm,Ph-Drss Gwv8 No Pcm Replaces Pn 710-61-8M0171851 - 8M0171851 - 714-61-8M0171851F1
Seal Replaces P/N 710-26-8M0124968 Replaces P/N 712-26-8M0124968 - 8M0124968 - 714-26-8M0124968F1
Sterndrive-Rh Alpha I 1.47 Gear Ratio - 5010147Cp - 714-5-5010147Cpf1
NOTE: When using the Alpha One sterndrive assembly as a replacement on earlier 4 & 6 cylinder inline models ('83 & Older), it will be necessary to replace the standard yoke with a short U-joint joke (p/n 39385A 1). This yoke is not included and must be removed from the old unit or ordered separately.
