Sea-Dog Line
Seadog T-Handle Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 2" Diameter - 221972 - 354-221972F1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Synchronized Wiper Controller - 414800-3 - 354-4148003F1
Synchronized Wiper Control will sync up to three motors and adds an interval speed position to the traditional two-speed motor. One short push takes the motors from interval, to slow, to fast speed. One long push activates the primary motor only. Capable of operating a washer system like the Sea-Dog® Windshield Washer Kit (414900-3). Includes synchronized controller, switch, and 5' wiring harness. Overload protected. CE Approved.
Seadog Swivel Drink Holder - 588130-3 - 354-5881303F1
Swivel Drink Holder features a quick release bracket for easy removal. Includes foam insulator, two wall brackets for flexible placement, and installation fasteners. Fits most cans, glasses, and mugs with handles. Chrome plated brass wire construction.
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254324-1 - 354-2543241F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254318-1 - 354-2543181F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254312-1 - 354-2543121F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
Seadog Stud Style Transom Mount Ski Tow - 371631-1 - 354-3716311F1
The Stud Style Transom Mount Ski Tow is constructed of AISI formed 316 stainless steel rod for corrosion resistance and durability. Designed to bolt through the transom for maximum strength.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254124-1 - 354-2541241F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254118-1 - 354-2541181F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254106-1 - 354-2541061F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Standard Wiper 12V Motor Kit | White Motor Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412428W-1 - 354-412428W1F1
Includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. IP66 rating. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | White Motor Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412421W-1 - 354-412421W1F1
Includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. IP66 rating. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | Black Motor Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412428B-1 - 354-412428B1F1
Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | Black Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412421B-1 - 354-412421B1F1
Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & Stainless Standard 12V Wiper Motor | 2-1/2" Shaft | Black Finish - 412328B-3 - 354-412328B3F1
Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm/blade combination (21" total length) using standard wiper arms. Same footprint as competitive standard wiper motors. Black only. CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & Stainless Standard 12V Wiper Motor | 2-1/2" Shaft | Black Finish - 412321B-3 - 354-412321B3F1
Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm/blade combination (21" total length) using standard wiper arms. Same footprint as competitive standard wiper motors. Black only. CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 24V Mrv Wiper Motor | Black Finish - 412178B-3 - 354-412178B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 24V Mrv Wiper Motor | Black Finish - 412171B-3 - 354-412171B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412138W-3 - 354-412138W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412128W-3 - 354-412128W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412121W-3 - 354-412121W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412118W-3 - 354-412118W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412138B-3 - 354-412138B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412131B-3 - 354-412131B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412128B-3 - 354-412128B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412121B-3 - 354-412121B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412118B-3 - 354-412118B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412111B-3 - 354-412111B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431153-1 - 354-4311531F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431152-1 - 354-4311521F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431151-1 - 354-4311511F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Side Light - 2-7/8" X 2-3/16" X 2-1/8" - Injection Molded Polycarbonate & Stamped Stainless Steel - 400004-1 - 354-4000041F1
For replacement of existing lighting (not for new construction). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for navigation lights for more information.
Seadog Side Light - 2-7/8" X 2-3/16" X 2-1/8" - Injection Molded Polycarbonate & Stamped Stainless Steel - 400003-1 - 354-4000031F1
For replacement of existing lighting (not for new construction). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for navigation lights for more information.
Seadog Replacement Cap & Gasket - 325239-1 - 354-3252391F1
Fits 325175 & 325235 rod holders.
Seadog Rail Mount Dual Boat Fender Holder Storage Rack - 7/8" To 1" - 327361-1 - 354-3273611F1
Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use.
Seadog Rail Mount Dual Boat Fender Holder Storage Rack - 7/8" To 1" - 327359-1 - 354-3273591F1
Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use.
Seadog Rail Mount Dual Boat Fender Holder Storage Rack - 7/8" To 1" - 327357-1 - 354-3273571F1
Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use.
Seadog Rail Mount 11-3/4" Rod Holder - Fits 7/8" To 1" Tubing - 327161-1 - 354-3271611F1
Constructed of injection molded polypropylene with a front mount adjustment screw. This allows easy adjustment without having to disassemble the rail mount brackets. A leash on the rod and/or reel is recommended when using rail mount rod holders. Accommodates rods up to 1-3/4".
Seadog Rail Mount 11-3/4" Rod Holder - Fits 7/8" To 1" Tubing - 327160-1 - 354-3271601F1
Constructed of injection molded polypropylene with a front mount adjustment screw. This allows easy adjustment without having to disassemble the rail mount brackets. A leash on the rod and/or reel is recommended when using rail mount rod holders. Accommodates rods up to 1-3/4".
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336382-1 - 354-3363821F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336380-1 - 354-3363801F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336362-1 - 354-3363621F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336360-1 - 354-3363601F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | Black Finish - 336387-1 - 354-3363871F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | Black Finish - 336385-1 - 354-3363851F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Pvc Coated Anchor Chain, 3/16" X 3' - 312933 - 354-312933F1
Forged steel hot dipped, galvanized construction with white vinyl PVC coating. This anchor lead chain features welded, over-sized end links for easy shackle attachment. White PVC coating provides corrosion resistance and boat surface protection. Recommended for use between the anchor and anchor line with fluke style anchors to increase holding power.
Seadog Powder Coated Aluminum & Stainless Waterproof Standard 12V Wiper Motor | 2-1/2" Shaft | White Finish - 412328W-3 - 354-412328W3F1
Waterproof Standard Wiper Motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion resistant powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm and blade combination (21" total length) using standard wiper arms. Fits the same footprint as most competitive standard (STD) wiper motors. White only. IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Standard 12V Wiper Motor | 2-1/2" Shaft | White Finish - 412321W-3 - 354-412321W3F1
Waterproof Standard Wiper Motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion resistant powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm and blade combination (21" total length) using standard wiper arms. Fits the same footprint as most competitive standard (STD) wiper motors. White only. IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 24V Wiper Motor | White Finish - 412278W-3 - 354-412278W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 24V Wiper Motor | White Finish - 412268W-3 - 354-412268W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412238W-3 - 354-412238W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412231W-3 - 354-412231W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412228W-3 - 354-412228W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412221W-3 - 354-412221W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412218W-3 - 354-412218W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412211W-3 - 354-412211W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412238B-3 - 354-412238B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412231B-3 - 354-412231B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412228B-3 - 354-412228B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412221B-3 - 354-412221B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412218B-3 - 354-412218B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412211B-3 - 354-412211B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Plastic Led 12V Dome Light With On / Off Switch | #8 Fastener - 401727-1 - 354-4017271F1
LED Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off rocker switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with #8 RH fasteners (not included).
Seadog Plastic Led 12V Dome Light With On / Off Switch | #8 Fastener - 401725-1 - 354-4017251F1
LED Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off rocker switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with #8 RH fasteners (not included).
Seadog Plastic 12V Spot & Flood Light Second Control Station Hard Wired Remote - 405693-1 - 354-4056931F1
Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.
Seadog Plastic 12V Spot & Flood Light Second Control Station Hard Wired Remote - 405691-1 - 354-4056911F1
Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.
Seadog Op273031 Replacement Screw For Deck Hinges - Op27303-1 - 354-Op273031F1
Screw for 2732501 & 2732711
Seadog Op27002 Release Pin For 270210, 270235 & 270245 - Op27002 - 354-Op27002F1
Release Pin for 270210, 270235 & 270245
Seadog Op27001 Replacement Screw For Deck Hinges - Op27001 - 354-Op27001F1
Screw for 270160, 270161, 270200, 270230 & 270240
Seadog Non-Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 1-1/2" Diameter - 221961L - 354-221961Lf1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Non-Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 1-1/2" Diameter - 221961 - 354-221961F1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Maxblast 20 Amp 124 Db 12V 11 Psi Mini Single 9-5/8" Trumpet Air Horn - 432611-1 - 354-4326111F1
MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 124 decibels and a frequency (Hz) of 630±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577056 & 2577057.
Seadog Maxblast 20 Amp 124 Db 12V 11 Psi Mini Single 9-5/8" Trumpet Air Horn - 432610-1 - 354-4326101F1
MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 124 decibels and a frequency (Hz) of 630±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577056 & 2577057.
Seadog Maxblast 11 Psi Air Horn 2-1/2" X 4" Compressor, 24V - 432598-1 - 354-4325981F1
MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 24VDC. Maximum: 20A.
Seadog Maxblast 11 Psi Air Horn 2-1/2" X 4" Compressor, 12V - 432599-1 - 354-4325991F1
MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 12VDC. Maximum: 20A.
Seadog Lift Handle - 221275-1 - 354-2212751F1
Investment Cast 316 Stainless. Use #10 FH fasteners.
Seadog Led Surface Mount Courtesy Light, White - 401405-1 - 354-4014051F1
Stamped 304/Plastic. These lights feature 3 low amperage, long life warm white LEDs. IP65 waterproof rating. Requires #10 FH fasteners.
Seadog Led Surface Mount Courtesy Light, Blue - 401409-1 - 354-4014091F1
Stamped 304/Plastic. These lights feature 3 low amperage, long life blue LEDs. IP65 waterproof rating. Requires #10 FH fasteners.
Seadog Led Surface Mount Courtesy Edge Light, White - 401375-1 - 354-4013751F1
360° LED Surface Mount Courtesy Edge Lights are constructed of stamped 304 stainless steel and lightweight plastic for corrosion resistance. Utilizing three blue or warm white LEDs that draws very low amperage and have a very long life. Installs with two #10 FH fasteners (not included). IP65 water resistant rating.
Seadog Led Surface Mount Courtesy Edge Light, Blue - 401379-1 - 354-4013791F1
360° LED Surface Mount Courtesy Edge Lights are constructed of stamped 304 stainless steel and lightweight plastic for corrosion resistance. Utilizing three blue or warm white LEDs that draws very low amperage and have a very long life. Installs with two #10 FH fasteners (not included). IP65 water resistant rating.
Seadog Led Snap-In Courtesy Light With Aluminum Bezel - 401354-1 - 354-4013541F1
LED Snap-In Courtesy Light is recess mounted in a 1" diameter hole, requiring no installation fasteners. Features a contemporary aluminum bezel. Utilizing one blue or white LED that draws very low amperage to keep power consumption to less than 1 watt. IP67 waterproof rating.
Seadog Led Snap-In Courtesy Light With Aluminum Bezel - 401350-1 - 354-4013501F1
LED Snap-In Courtesy Light is recess mounted in a 1" diameter hole, requiring no installation fasteners. Features a contemporary aluminum bezel. Utilizing one blue or white LED that draws very low amperage to keep power consumption to less than 1 watt. IP67 waterproof rating.
Seadog Led Day/Night Dome Light, 5" - 400353-1 - 354-4003531F1
These LED Day/Night Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off/on toggle switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 15 white and 5 red LEDs per light. Surface mounts with three #6 RH fasteners (not included).
Seadog Led 12V Stud Mount Hand Rail | (6) Blue Led'S | Formed 304 Stainless | 5/16" Fastener - 254512-1 - 354-2545121F1
LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
Seadog Led 12V Stud Mount Hand Rail | (6) Blue Led'S | Formed 304 Stainless | 5/16" Fastener - 254509-1 - 354-2545091F1
LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
Seadog Led 12V Dc Telescopic All Around Light | Uscg 2 Nm Approved | #8 Fastener - 400016-1 - 354-4000161F1
LED Removable Telescopic 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with three #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog Large Boat Hook Mooring Buoy Snap Kit - 491058-1 - 354-4910581F1
The Large Boat Hook Mooring Buoy Snap Kit is the convenient and easy solution for attaching a mooring line to a buoy or cleat. Using the included keeper plate, these channeled 316 stainless steel snaps fit onto the end of boat hooks or other poles, turning a challenging task into a quick and simple process. The kit includes the snap hook, keeper plate, and fasteners for attaching the keeper plate. Sea-Dog® Boat Hooks have pre-drilled mounting holes for easy installation. Truly an advantage on high bowed vessels by simply reaching out with the boat pole, hook the carabiner on the inside of the attachment point, then pull back on the boat pole. The carabiner snaps shut as it slides free of the pole, securely clipping to the mooring eye or cleat. The large size works on cleats up to 24"! WLL - 2,185 lbs.
Seadog Horizontal Mount Side Lights, 1 Pr. - 400165-1 - 354-4001651F1
Constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included).
Seadog Hinged Jaw Slide Fitting With Bolt | Investment Cast 316 Stainless | 1/4" Pin Size - 270167-1 - 354-2701671F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Seadog Hinged Jaw Slide Fitting With Bolt | Investment Cast 316 Stainless | 1/4" Pin Size - 270166-1 - 354-2701661F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Seadog Hatch Pull - 222420-1 - 354-2224201F1
Constructed of chrome plated sand cast brass these Hatch Pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321296-1 - 354-3212961F1
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321295-1 - 354-3212951F1
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321292-1 - 354-3212921F1
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321291-1 - 354-3212911F1
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).
Seadog Hand Rail Bow Form, Outside Diameter 7/8", 316 Stainless - 295110-1 - 354-2951101F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog Grab Handle, White - 227561-1 - 354-2275611F1
Soft Grip Handle with concealed fasteners (included). Constructed of injection molded nylon with PVC coating.
Seadog Grab Handle, Black - 227560-1 - 354-2275601F1
Soft Grip Handle with concealed fasteners (included). Constructed of injection molded nylon with PVC coating.
Seadog Flush Mount Stainless Steel Rod Holder - 325176-1 - 354-3251761F1
Flush Mount Rod Holders are constructed of corrosion resistant formed 316 stainless steel. Features a 30° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included).
Seadog Flush Mount Combo Drink Holder W/Drain Fitting - 588065 - 354-588065F1
Flush Mount Combo Drink Holders with Drain Fittings feature a dual-purpose design that allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Integral drain fitting allows water to be drained directly into the bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" diameter hole for installation. The bottom is padded with a rubber insert to prevent rattling. Includes mounting gasket. Constructed of corrosion resistant stamped 304 stainless steel.
