Sea-Dog Line
Zinc Plated Steel Clamp-On Oar Lock, Pair, 1/2" Shaft - 582060-1 - 354-5820601F1
Clamp-On Oarlock with standard 1/2" x 2" pin. Attaches quickly to oar shaft with easy to install bolted clamp. Fits oars between 3/4" and 1-7/16" in diameter. Recommended for freshwater use. Zinc plated steel construction.
Yeck Fill Cap-Blue (Water) - 357017-1 - 354-3570171F1
Blue Water Cap Only. Cap threads are 1-1/4" x 11-1/2 NPSM straight.
Wireless Remote For 4056203 Spot/Flood Light - 405692-1 - 354-4056921F1
Wireless 2nd station remote for spot/flood lights.
Wireless Remote Control - 405682-1 - 354-4056821F1
Allows completely portable remote control of your spotlight.
Wire Stripper/Crimper Tool - 429900-1 - 354-4299001F1
Wire Stripper & Crimper tool crimps and strips 22-10 gauge wire. Constructed of powder coated steel. A great addition to any tool box.
Wiper Blade - 414222S-1 - 354-414222S1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Wiper Blade - 414220S-1 - 354-414220S1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Wiper Blade - 414218S-1 - 354-414218S1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Wiper Blade - 414216S-1 - 354-414216S1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Wiper Blade - 414214S-1 - 354-414214S1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Wiper Blade - 414212S-1 - 354-414212S1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Windshield Brace Foot, Black, Pair - 324300-1 - 354-3243001F1
Constructed of UV resistant black injection molded nylon. This Windshield Brace Foot fits 1/2" ID tubing to support a windshield.
Windshield / Door Bumper Pad, Clear - 324391-1 - 354-3243911F1
Injection molded PVC.
Windshield / Door Bumper Pad, Black - 324390-1 - 354-3243901F1
Injection molded PVC.
Waterproof Playing Cards - 588811-1 - 354-5888111F1
Designed especially for marine use and are 100% plastic. New design features artwork of ship's figureheads. Very durable.
Waterproof 12V Trolling Motor Receptacle - 426183-1 - 354-4261831F1
Trolling Motor Plug is constructed of injection molded PVC. Two 10-gauge wire leads. 30A.
Waterproof 12V Trolling Motor Plug - 426184-1 - 354-4261841F1
Trolling Motor Plug is constructed of injection molded PVC. Two 10-gauge wire leads. Receptacle fits 1-1/8" hole. 30A.
Washdown Water Outlet Ss - 513120-1 - 354-5131201F1
Allows for garden hose hookup to on board water system for use as washdown system. Standard male hose connector. Requires separate ball or gate valve to regulate water flow. 1/2" FIPT x 3/4" MGHT.
Universal Kill Switch - 420498-1 - 354-4204981F1
The marine emergency cut-off Universal Kill Switch attaches to your life vest while operating a boat or personal watercraft and is designed to instantly cut battery power when detached. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application. The housing is constructed of weatherproof injection molded nylon and Delrin with 1/4" brass terminals. The switch includes a lanyard approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 3/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
Universal Deck Plate Key - 335690-1 - 354-3356901F1
Universal Deck Fill Key is constructed of corrosion resistant stamped 304 stainless steel. Fits all Sea-Dog® fuel fills as well as most other competitors fills. A multi-purpose tool that also functions as a shackle key, bottle opener, straight blade screwdriver, plus 5/16", and 7/16" hex head wrenches.
Two Pole Rod Storage Rack, Black - 325029-1 - 354-3250291F1
Constructed from one-piece of injection molded UV stabilized polypropylene. Holds rods up to 1-3/4" in diameter. Includes four #8 stainless steel mounting screws. Has a built-in knife and lure holder.
Twin Shank Bow Eye - 079233-1 - 354-0792331F1
features a die cast zinc chrome plated head with chrome steel shafts. U-Bolt surrounds cast eye for added strength. 5/16"-18 UNC threads. For use as a tie-down point on your boat's bow. Nuts and washers included. Recommended for fresh water applications. Breaking strength is 6,000 lbs.
Twin Roller Door Catch - 227141-1 - 354-2271411F1
Upgrade your cabinet or wardrobe with these Twin Roller Door Catches. Sturdy injection molded nylon construction these catches provide secure door closure. Installs with four #6 RH fasteners (not included). Packed in sets of 4 each.
Tube Mount Antenna Base - 329520-1 - 354-3295201F1
The Tube Mount Antenna Bracket can be used with any 1" OD stainless tubing creating custom antenna mounts. Investment cast 316 stainless construction. When used in conjunction with a stainless steel 90° round base deck fitting, antenna extensions of any length can be made with a full-length passage for coaxial connectors. Attaches to tubing with two 1/4"-28 x 3/16" set screws which are included. This bracket will accept any standard antenna with 1-14 threads.
Track End Cap Insert .85 Black - 273213-1 - 354-2732131F1
Track Fittings are constructed of UV resistant injection molded nylon. End Caps establish the termination point of a Bimini slide assembly.
Top Slide 1" Square Tube 2/Cd - 273561-1 - 354-2735611F1
Used as part of a Bimini top system to install a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon Slide Fittings are durable, UV and corrosion resistant. Square jaws fit 1" x 1" tubing commonly found on pontoon boats. Set screw on back allows you to quickly and easily adjust the placement of these slides where they are needed.
Top Slide 1" Square Tube 2/Cd - 273560-1 - 354-2735601F1
Used as part of a Bimini top system to install a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon Slide Fittings are durable, UV and corrosion resistant. Square jaws fit 1" x 1" tubing commonly found on pontoon boats. Set screw on back allows you to quickly and easily adjust the placement of these slides where they are needed.
Top Insert 1" Square Tube 2Cd - 273581-1 - 354-2735811F1
Top Fitting inserts for 1" square tubing are constructed of UV stabilized injection molded nylon. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. 1/4" Pin size.
Top Insert 1" Square Tube 2Cd - 273580-1 - 354-2735801F1
Top Fitting inserts for 1" square tubing are constructed of UV stabilized injection molded nylon. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. 1/4" Pin size.
Toggle Switch-Light Tip (Spst) - On/Off - 420121-1 - 354-4201211F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Toggle Switch-Light Tip (Spdt) - On/Off/On - 420123-1 - 354-4201231F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Toggle Switch-Light Tip (Spdt) - Mom On/Off/Mom On - 420124-1 - 354-4201241F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Toggle Switch (Spst) - Mom.On/Off/On - 420105-1 - 354-4201051F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Toggle Switch (Spst) - Mom.On/Off - 420102-1 - 354-4201021F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Toggle Switch (Spdt) - On/Off/On - 420108-1 - 354-4201081F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Toggle Switch (Spdt) - Mom.On/Off/Mom.On - 420109-1 - 354-4201091F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Toggle Switch (Dpst) - On/Off/On - 420103-1 - 354-4201031F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Toggle Switch (Dpdt) - Mom.On/Off/Mom.On - 420104-1 - 354-4201041F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Toggle Switch - 420460-1 - 354-4204601F1
Stamped brass. Molded bakelite. Includes On/Off dash plate. For panels to 7/16".
Tiller Rope Springs, 5" Bulk - 91814 - 354-091814F1
Electro-galvanized steel tiller rope springs provide tension between the tiller rope and jaw shackles.
Tiller Rope Springs, 5" 2/Card - 091814-1 - 354-0918141F1
Electro-galvanized steel tiller rope springs provide tension between the tiller rope and jaw shackles.
Tiller Cable Pulley 1 3/4" - 091934-1 - 354-0919341F1
Stainless steel bracket and eye pad. Feeds line onto anchor control system to avoid uneven line buildup. Carded.
Thumb Latch Ea - 324180-1 - 354-3241801F1
Constructed of UV resistant black injection molded nylon. These Windshield Latches are used to secure windshield doors with a simple twist design. Prevents rattling due to engine vibration at high speeds.
Thru-Hull-5/8 - 520740 - 354-520740F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull-3/4 - 520750 - 354-520750F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull W/Scupper - 520510-1 - 354-5205101F1
This Thru-Hull with Scupper Valve mounts through the transom and provides a water exit for boats with self-bailing cockpits. Ideal for above the water line drainage. Valve features a soft black flapper. For use with 1-1/2" hose. Compatible with most self-bailing applications. Constructed of injection molded acetal. Installs with four #6 FH fasteners (not included).
Thru-Hull Fitting 5/8" -- - 520740-1 - 354-5207401F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull Fitting 3/4" - 520750-1 - 354-5207501F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull Fitting 1 1/8" -- - 520770-1 - 354-5207701F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull Fitting 1 1/2" -- - 520790-1 - 354-5207901F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru Hull-1-1/8 - 520770 - 354-520770F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru Hull-1-1/2 - 520790 - 354-520790F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Swivel Hasp - 221130-1 - 354-2211301F1
Constructed of 304 stainless steel for superior corrosion resistance and durability. Designed with a slotted plate that fits over a swivel pad eye which can rotates to act as a temporary lock. Will accept a padlock with up to 5/16" bail for more permanent protection. Installs with eight #8 FH fasteners (not included).
Switch 4Pos Ignition-Poly - 420379-1 - 354-4203791F1
Four Position Ignition Switch is constructed of polypropylene. For accessory, off, ignition, and start functions. 13/16" diameter long shaft. Maximum panel thickness: 1-1/8. Four screw or four blade terminal electrical configurations. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys.
Stud Catches, Pr. - 222823-1 - 354-2228231F1
Constructed of sand cast brass with a chrome plated finish. These Sea-Dog® Stud Catches are ideal for applications that require repeated disengagement. The design affords no direct contact between the stud and panel surfaces, preventing damage and wear. Stud catches feature an adjustable, stainless steel, spring-loaded ball that allows for easy adjustment of the holding strength depending on door size. Strike can be positioned to enter in any of three ways, from the front, or from either side. Installs with four FH fasteners (not included).
Stud Catches, Pr. - 222822-1 - 354-2228221F1
Constructed of sand cast brass with a chrome plated finish. These Sea-Dog® Stud Catches are ideal for applications that require repeated disengagement. The design affords no direct contact between the stud and panel surfaces, preventing damage and wear. Stud catches feature an adjustable, stainless steel, spring-loaded ball that allows for easy adjustment of the holding strength depending on door size. Strike can be positioned to enter in any of three ways, from the front, or from either side. Installs with four FH fasteners (not included).
Stud Catches, Pr. - 222821-1 - 354-2228211F1
Constructed of sand cast brass with a chrome plated finish. These Sea-Dog® Stud Catches are ideal for applications that require repeated disengagement. The design affords no direct contact between the stud and panel surfaces, preventing damage and wear. Stud catches feature an adjustable, stainless steel, spring-loaded ball that allows for easy adjustment of the holding strength depending on door size. Strike can be positioned to enter in any of three ways, from the front, or from either side. Installs with four FH fasteners (not included).
Stud Catch 2-1/4" Brass - 222843-1 - 354-2228431F1
Extruded brass with stainless ball and spring. Interior use only.
Stud Catch 1-11/16" X 5/16" - 222841-1 - 354-2228411F1
Extruded brass with stainless ball and spring. Interior use only.
Stud Catch 1 15/16" Brass - 222842-1 - 354-2228421F1
Extruded brass with stainless ball and spring. Interior use only.
Straight Gas Tank Vent, White Nylon - 357105-1 - 354-3571051F1
Gas Tank Vents provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. An integral 5/8" hose barb securely connects vent hose.
Straight Gas Tank Vent, Stainless - 352210-1 - 354-3522101F1
Gas tank vents function to provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption as well as temperature related expansion and contraction. Designed to prevent vacuum build up during use which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Two screens provide a barrier to keep unwanted contaminants from entering the tank. An integral 5/8" hose barb securely connects vent hose.
Straight Gas Tank Vent, Chrome/Zinc - 352100-1 - 354-3521001F1
Gas Tank Vents provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. An integral 5/8" hose barb securely connects vent hose.
Straight Gas Tank Vent, Chrome Zinc, Carded - 352110-1 - 354-3521101F1
Gas tank vents function to provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption as well as temperature related expansion and contraction. Designed to prevent vacuum build up during use which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Two screens provide a barrier to keep unwanted contaminants from entering the tank. An integral 5/8" hose barb securely connects vent hose.
Straight Gas Tank Vent, Chrome Brass - 352010-1 - 354-3520101F1
Gas tank vents function to provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption as well as temperature related expansion and contraction. Designed to prevent vacuum build up during use which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Two screens provide a barrier to keep unwanted contaminants from entering the tank. An integral 5/8" hose barb securely connects vent hose.
Straight Gas Tank Vent, Black Nylon - 357100-1 - 354-3571001F1
Gas Tank Vents provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. An integral 5/8" hose barb securely connects vent hose.
Steering Cable Boot, Carded - 521700-1 - 354-5217001F1
Durable molded rubber Steering Cable Boot protects the output end of all standard steering cables keeping dirt, debris, and moisture out and extending the service life of the cable. Includes two cable ties.
Steering Cable Boot, Bulk - 521700 - 354-521700F1
Durable molded rubber Steering Cable Boot protects the output end of all standard steering cables keeping dirt, debris, and moisture out and extending the service life of the cable. Includes two cable ties.
Stainless Surface Mount Lift Ring - 221831-1 - 354-2218311F1
Designed to keep your valuables protected, the Surface Mount Locking Ring Pull is ideal for hatches, deck plates, cabinets, and drawers. Constructed of corrosion resistant 304 stamped stainless steel with a die cast zinc lock. Ring is recessed for a flush, clean installation. Comes with two matching keys. Keys are random so requesting multiple rings keyed alike is not possible. Comes with two locking arms for flush or offset installations. Installs with back mounted threaded nut.
Stainless Surface Mount Lift Ring - 221830-1 - 354-2218301F1
Constructed of corrosion resistant 304 stamped stainless steel. These ring pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Surface mounted for easy installation with four #10 FH fasteners (not included).
Stainless Strap Hinge 6-1/8", Pair - 201136-1 - 354-2011361F1
Consisting of two long narrow leaves extending from a single knuckle, strap hinges are commonly used for surface mounting dock box lids, fish holds, etc. Constructed of corrosion resistant 304 stainless steel. Good for outdoor applications where the hinges will be in frequent use. Installs with #8 fasteners (not included).
Stainless Strap Hinge 4-1/8", Pair - 201134-1 - 354-2011341F1
Consisting of two long narrow leaves extending from a single knuckle, strap hinges are commonly used for surface mounting dock box lids, fish holds, etc. Constructed of corrosion 304 resistant stainless steel. Good for outdoor applications where the hinges will be in frequent use. Installs with #8 fasteners (not included).
Stainless Steel Microphone Clip - 329990-1 - 354-3299901F1
Secure your microphone close to your radio with this one-piece corrosion resistant clip. Fits all standard microphones for hailers, VHF or CB radios. Fasteners not included.Carded.
Stainless Steel Cigarette/Char - 426352-1 - 354-4263521F1
Combination chart light and cigarette lighter with the flick of a switch. Stainless mounting plate. Chrome steel sockets should only be used on fresh water boats. Use #8FH fastener.
Stainless Snap Handle Drain Plug, 1", Bulk - 520075-1 - 354-5200751F1
Stainless Snap Handle Drain Plug, 1"
Stainless Snap Handle Drain Plug, 1", 20 Pc Display - 520075-5 - 354-5200755F1
Stainless Snap Handle Drain Plug, 1"
Stainless Release Pin 1/4" X 2-1/2", Pr. - 193425-1 - 354-1934251F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 2-1/2" - 193425 - 354-193425F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 2-1/16", Pr. - 193420-1 - 354-1934201F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 2-1/16" - 193420 - 354-193420F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 1", Pr. - 193410-1 - 354-1934101F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 1" - 193410 - 354-193410F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 1-1/2", Pr. - 193415-1 - 354-1934151F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 1-1/2" - 193415 - 354-193415F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Pontoon Gate Latch - 221880-1 - 354-2218801F1
Investment cast 316 stainless steel construction for corrosion resistance and durability. This gate latch is designed to be used with 1-1/4" square tubing. Ideal for pontoon gates. Installs with 1/4" thru bolt (not included).
Stainless Oblong Eye Plate-4 I - 88723 - 354-088723F1
Oblong pad eye plate fittings are constructed of marine grade investment cast 316 stainless steel, for strength and corrosion resistance. Multitude of uses. Mounting hardware sold separately.
