Sea-Dog Line
Chrome brass. 12 volt, 2 pin.... More Details
Consists of two rectangular leaves that attach to the abutting surfaces of a door and door jamb. Constructed of UV resistant, injection molded fiberglass nylon with a corrosion resistant, stainless st... More Details
Consists of two rectangular leaves that attach to the abutting surfaces of a door and door jamb. Constructed of UV resistant, injection molded fiberglass nylon with a corrosion resistant, stainless st... More Details
Festoon Light Bulbs are double ended bulbs that resemble AGC style glass fuses and are often used for marine navigation lighting. They give off a warm, incandescent white light. Nickel plated brass ti... More Details
Festoon Light Bulbs are double ended bulbs that resemble AGC style glass fuses and are often used for marine navigation lighting. They give off a warm, incandescent white light. Nickel plated brass ti... More Details
Festoon Light Bulbs are double ended bulbs that resemble AGC style glass fuses and are often used for marine navigation lighting. They give off a warm, incandescent white light. Nickel plated brass ti... More Details
Similar to a bi-pin connector, a Wedge Base Light Bulb uses two wires that extend into the bulb and are bent up onto the sides of the base where they make contact with the socket. Compression force ho... More Details
Swivel eye bolt snaps are designed for use with rope, chain, wire or cable. Constructed of corrosion resistant sand cast brass they can be used for tie-downs, lifting wires or other rigging applicatio... More Details
Machined bronze Garboard Drain & Plug provides drainage for bilge during haul-out. 1/2" NPT tapered thread plug provides a watertight seal with 2" diameter flange. Plug has a square top for use with a... More Details
Stamped brass.... More Details
This swivel eye boat snap features a spring-loaded latch for easy attachment. Constructed of sand cast brass for corrosion resistance and durability they are designed for medium duty lifting and riggi... More Details
Brass Snap Handle Drain Plug, 1" w/o Chain... More Details
Brass Snap Handle Drain Plug, 1" W/O Chain, 25 Pc Display - 520070-5 - 354-5200705F1
Sea-Dog Line
$212.22
Snap Handle Drain Plug, 1"... More Details
Brass Snap Handle Drain Plug, 1-1/4" w/o Chain... More Details
This universal Momentary Push Button On-Off Switch can be panel mounted in a 5/8" diameter hole and is wired with two screw terminals. Stamped brass construction to withstand harsh marine conditions. ... More Details
Three Position Ignition Switch is constructed of stamped brass. For off, ignition, and start functions. 13/16" diameter long shaft. Maximum panel thickness: 1-1/8. Three screw terminal electrical conn... More Details
The formed 304 stainless flag pole fits most bow forms with 1/2" diameter flag pole mounting holes. Each flag pole comes complete with split rings for easy flag attachment. Maximum safe speed 10 MPH.... More Details
Stamped brass.... More Details
Machined bronze Garboard Drain & Plug provides drainage for bilge during haul-out. 1/2" NPT tapered thread plug provides a watertight seal with 2" diameter flange. Plug has a square top for use with a... More Details
These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover. Part of a system to disperse rain water to avoid water from accumulating in ... More Details
Webbing Lift Handle is constructed of nylon webbing with an injection molded nylon handle that is easy to hold even when wet. Ideal for replacement of worn or torn handles or to add another handle to ... More Details
Constructed of chrome plated die cast zinc. Recommended for freshwater use. Installs to deck with #10 FH fasteners (not included). Fittings can be attached to railing with set screws or can be pop riv... More Details
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight se... More Details
Black nylon body.... More Details
Nylon Bimini Straps are 1" wide with corrosion resistant stainless snap hooks. Used to replace lost or damaged Bimini top straps. 8' long.... More Details
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satis... More Details
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satis... More Details
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satis... More Details
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satis... More Details
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satis... More Details
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satis... More Details
Battery Box Strap & Brackets includes a woven polypropylene strap, injection molded nylon buckle, two brackets, and four #8 FH fasteners.... More Details
Battery Box Strap & Brackets includes a woven polypropylene strap, injection molded nylon buckle, two brackets, and four #8 FH fasteners.... More Details
Constructed of durable chrome plated sand cast brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and c... More Details
Combination multiple gang AGC Fuse/Terminal Blocks with brass fuse clips and screws. Accepts standard 1/4" x 1-1/4" AGC fuses. Fuses not included. This fuse block features a separate grounding termina... More Details
Combination multiple gang AGC Fuse/Terminal Blocks with brass fuse clips and screws. Accepts standard 1/4" x 1-1/4" AGC fuses. Fuses not included. This fuse block features a separate grounding termina... More Details
Place our POP displays on your counter or hang with the included peg hook rack to meet your customer's small items demands. Stamped brass/nitrile.... More Details
Kit contains 5ea: 3, 5, 7.5, 10, 15 and 20 amp fuses.... More Details
Sand cast brass chrome plated. Carded.... More Details
Four-way ratchet design with handle, for side or deck mounting. Corrosion resistant injection molded nylon construction. This bracket will accept any standard antenna with 1"-14 threads. Not recommend... More Details
Stainless steel adjustable wiper arms provide long life and reliability in all conditions.... More Details
Stainless steel adjustable wiper arms provide long life and reliability in all conditions.... More Details
Stainless steel adjustable wiper arms provide long life and reliability in all conditions.... More Details
Stainless steel adjustable wiper arms provide long life and reliability in all conditions.... More Details
Stainless steel adjustable wiper arms provide long life and reliability in all conditions.... More Details
Constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to p... More Details
Constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to p... More Details
Constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to p... More Details
Constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to p... More Details
Ratchet mount antenna bracket with handle, for side or deck mounting. Die cast zinc construction with mirror finish chrome plating. This bracket will accept any standard antenna with 1"-14 threads. De... More Details
Ratchet mount antenna bracket with handle, for side or deck mounting. Investment cast 316 stainless steel construction with dual swiveling mounts for full adjustability. This bracket will accept any s... More Details
These Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. 180° Adjustable Hinge allows universal mounting at almost any angle including vertic... More Details
Allows you to easily add length on hard to reach snaps from shrunken material. Nickel Plated Brass/Nylon.... More Details
Allows you to easily add length on hard to reach snaps from shrunken material. Nickel Plated Brass/Nylon.... More Details
Allows you to easily add length on hard to reach snaps from shrunken material. Nickel Plated Brass/Nylon.... More Details
Allows you to easily add length on hard to reach snaps from shrunken material. Nickel Plated Brass/Nylon.... More Details
Allows you to easily add length on hard to reach snaps from shrunken material. Nickel Plated Brass/Nylon.... More Details
Allows you to easily add length on hard to reach snaps from shrunken material. Nickel Plated Brass/Nylon.... More Details
Plastic. Accurately measures the correct oil to gas mixture for all 2-cycle engines. Mixtures of 24-1, 33-1, 40-1, 50-1 and 100-1 ratios are shown on the see-thru bottle for accurate measuring in both... More Details
Side Mount Rod Holders are constructed of injection molded polypropylene with 304 stainless steel mounting brackets. Accommodates rods up to 1-3/4" in diameter. Installs with four #8 RH fasteners (not... More Details
Flush Mount Drink Holders accommodate drink containers up to 2-7/8 in diameter and require a 3" diameter hole for installation. 2" depth. Impact resistant injection molded ABS construction.... More Details
These Louvered Vents are constructed of impact resistant injection molded ABS and are designed to be used in conjunction with a collector box to facilitate air intake and exhaust. Installs with eight ... More Details
These Louvered Vents are constructed of impact resistant injection molded ABS and are designed to be used in conjunction with a collector box to facilitate air intake and exhaust. Installs with eight ... More Details
Constructed of chrome plated die cast zinc. These Rail Base Fittings are recommended for freshwater use. Installs to deck with #10 FH fasteners (not included). Fittings can be attached to railing with... More Details
A corrosion resistant 304 stainless steel bracket for 90° connections. Installs with four #8 FH fasteners (not included).... More Details
A corrosion resistant 304 stainless steel bracket for 90° connections. Installs with four #8 FH fasteners (not included).... More Details
A corrosion resistant 304 stainless steel bracket for 90° connections. Installs with four #8 FH fasteners (not included).... More Details
Constructed of chrome plated die cast zinc. These Rail Tees, Elbows, and Bow Forms are recommended for freshwater use. Fittings can be attached to railing with set screws or can be pop riveted using s... More Details
The Side Mount Eye End used in conjunction with an Eye Mount Bracket converts standard internal eyes into quick release fittings. These 90° eye ends fit 3/4" OD tubing. Bracket installs with two #8 FH... More Details
The Side Mount Eye End used in conjunction with an Eye Mount Bracket converts standard internal eyes into quick release fittings. These 90° eye ends fit 3/4" OD tubing. Bracket installs with two #8 FH... More Details
Nickel Plated Brass. 12V, 30 mA... More Details
Constructed of chrome plated die cast zinc. These Rail Base Fittings are recommended for freshwater use. Installs to deck with #10 FH fasteners (not included). Fittings can be attached to railing with... More Details
This Gear Hammock is great for ventilated, suspended storage. Perfect for bunk areas! 60" Length. Mildew and rot resistant nylon construction. Use with Hammock Hooks 671460 or 671461 (not included).... More Details
Constructed of chrome plated die cast zinc. These Rail Tees, Elbows, and Bow Forms are recommended for freshwater use. Fittings can be attached to railing with set screws or can be pop riveted using s... More Details
Aluminum Vertical Rocker Switch Panel is constructed of stamped anodized aluminum. Features six 15A 12VDC illuminated SPST On/Off rocker switches and six 10A 12VDC fuse holders. Individual circuit 10A... More Details
Nickel Plated Brass. 12V, 30 mA... More Details
Nickel Plated Brass. 12V, 20 mA... More Details
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can hand... More Details
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can hand... More Details
Shock Cord Hooks & Crimps can be used with bulk shock cords to create custom tie-down lengths. Corrosion resistant formed 304 stainless steel construction.... More Details
Shock Cord Clips can be used with bulk shock cords to create custom tie-down lengths. UV stabilized injection molded nylon construction.... More Details
Shock Cord Clips can be used with bulk shock cords to create custom tie-down lengths. UV stabilized injection molded nylon construction.... More Details
Galvanized anchor shackles in a counter top display.... More Details
