Sea-Dog Line
Seadog 328079 Large Anchor Bow Roller 328074 Replacement Wheel - 5 Pieces Per Pack - 328079-1 - 354-3280791F1
Replacement wheel for large anchor bow roller.
Seadog 328076 Large Platform Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328076 - 354-328076F1
These corrosion resistant stamped 304 stainless steel Large Platform Bow Rollers are designed to handle most fluke style anchors and mount in or under the anchor slot of a platform or bow plank. The rubber wheel accommodates rope up to 1-1/2" in diameter. Installs with six 3/8" bolts (not included).
Seadog 328074 Large Anchor Bow Roller | 1-1/2" Max Rope Diameter - 328074 - 354-328074F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328068 Pivoting Medium Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328068 - 354-328068F1
These corrosion resistant stamped 304 stainless steel Pivoting Medium Bow Rollers are designed to create a self-launching anchor system. As the anchor line is played out, the anchor roller pivots downward under the weight of the anchor, allowing it to fall freely into the water. The rubber wheel accommodates rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328064 Unpolished Medium Anchor Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328064 - 354-328064F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328057 Medium Fairlead Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328057 - 354-328057F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328054 Unpolished Seahook Style Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328054 - 354-328054F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328053 Unpolished Long Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328053 - 354-328053F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328052 Unpolished Short Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328052 - 354-328052F1
These corrosion resistant stamped 304 stainless steel Short Bow Rollers make dropping and weighing anchor a breeze. Easy to use, it reduces the risk of damage to the hull or deck. The rubber wheel accommodates rope up to 1" in diameter. Installs with three 3/8" bolts (not included).
Seadog 328051 Platform Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328051 - 354-328051F1
These corrosion resistant stamped 304 stainless steel Platform Bow Rollers are designed to handle most fluke style anchors using a variety of platform or bowsprit mounting options. The flanges hold the flukes of the anchor securely, reducing the risk of damage to the hull. The rubber wheel accommodates rope up to 1" in diameter. Installs with four 3/8" bolts (not included).
Seadog 327199 Removable Rail Mount Clamps | Fit 3/4" To 1-1/4" Tubing - 327199-1 - 354-3271991F1
Removable Round Rail Mount Clamps include shims, thumb screws, and all mounting hardware. Great to retrofit your existing rails to mount a wide variety of items including fillet tables, solar panels, GPS, cell phone holders, cup holders, binocular racks, etc. Clamps fit 3/4", 1", and 1-1/4" tubing. UV stabilized injection molded nylon construction with stainless hardware.
Seadog 327175 Rail Mount 9" Rod Holder | Fits 7/8" To 1" Tubing - 327175-1 - 354-3271751F1
Rail mount 9" rod holder designed with a front mount adjustment screw. Allows for easy adjustment without having to disassemble the rail mount brackets. A safety line on the rod and or reel is recommended when using rail mount rod holders.
Seadog 327130 Rail Mount Ring Buoy Bracket - Fits 7/8" Or 1" Tubing Or Direct Mount - 327130-1 - 354-3271301F1
The Sea-Dog® Rail Mount Ring Buoy Bracket can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware. Made from marine grade stamped aluminum and powder coated for a long-lasting finish.
Seadog 326599 Fillet Table Rail Mount Adapter Plate With Hardware | 1/4" Fastener - 326599-1 - 354-3265991F1
Fillet table rail mount adapter plate with hardware. Use 1/4" fastener.
Seadog 3265853 Fillet & Prep Table - 326585-3 - 354-3265853F1
Solid one piece construction for long lifeUV stabilized high-density polyethylene
Seadog 3254251 Triple Threat™ Rod Holder - Track Mount W/ Extension, Black - 325425-1 - 354-3254251F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait, cast, or fly. The addition of our 6" extension gives you more room in the cockpit and clearance for pedal drives. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. This rod holder is supplied with a track mount base that is designed to attach to all popular brands of track. Constructed of injection molded glass filled nylon. The rod holder is interchangeable with either surface mount or track mount bases.
Seadog 3254161 Triple Threat™ Rod Holder - Track Mount, Black - 325416-1 - 354-3254161F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait cast, or fly. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. This rod holder is supplied with a track mount base that is designed to attach to all popular brands of track. The rod holder is interchangeable with either surface mount or track mount bases. Constructed of injection molded glass filled nylon.
Seadog 3254121 Triple Threat™ Rod Holder - Surface Mount, Black - 325412-1 - 354-3254121F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait, cast, or fly. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. Comes supplied with a surface mount base designed to be fastened directly to the boat. The rod holder is interchangeable with either surface mount or track mount bases. Constructed of injection molded glass filled nylon. Fasteners not included.
Seadog 325235 Flush Mount Rod Holder & Cap, Investment Cast 316 Stainless - 325235-1 - 354-3252351F1
The unique design of the cast stainless mounting flange accommodates a gasket reducing leakage common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included). This new design has the same liner and cap that is used on the stamped stainless steel rod holder (325175).
Seadog 325190 Side Mount 9" Rod Holder | Formed 316 Stainless | #10 Fastener - 325190-1 - 354-3251901F1
Side Mount Rod Holder slides in and out of mounting plate for a lower profile with not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16". Installs with four #10 FH fasteners (not included).
Seadog 3251891 Led Rgb Rod Holder Tube Insert Only - 325189-1 - 354-3251891F1
Retrofit your existing Rod Holder with the LED RGB Tube Insert (11"). Just remove your existing liner, install the LED RGB Tube Insert and cut to your mounting face angle. Patented. Add to multiple rod holders with optional terminal block (4266241). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes.
Seadog 3251881 Led Rgb Rod Holder Cap Light - 325188-1 - 354-3251881F1
LED RGB Rod Holder Cap attaches on the bottom of any 2" diameter rod holder. Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes. Patented. Add multiple LED RGB Rod Holder Caps with optional terminal block (4266241).
Seadog 3251811 Led Rgb Rod Holder - 325181-3 - 354-3251811F1
These LED RGB Rod Holders have translucent tube inserts with bright RGB LEDs. Constructed of investment cast 316 stainless. Patented. Add multiple LED RGB rod holders with optional terminal block (4266241). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes.
Seadog 325161 Plastic Flush Mount Rod Holder, Flat Dark Earth - 325166-1 - 354-325161F1
Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Seadog 3251601 Plastic Flush Mount Rod Holder, Black - 325160-1 - 354-3251601F1
Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Seadog 325150 Side Mount Rod Holder - Formed 316 Stainless Steel - #8 Fastener - 325150-1 - 354-3251501F1
Side Mount Rod Holders and mounting brackets are constructed of formed 316 stainless steel with plastic end cap. Accommodates rods up to 1-5/8" in diameter. Installs with four #8 RH fasteners (not included).
Seadog 3251231 Side Mount Rod Holder, Flat Dark Earth - 325123-1 - 354-3251231F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3251211 Side Mount Rod Holder, White - 325121-1 - 354-3251211F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3251201 Side Mount Rod Holder, Black - 325120-1 - 354-3251201F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3250341 Triple Threat™ Three Pole Rod Holder, Flat Dark Earth - 325034-1 - 354-3250341F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 3250331 Triple Threat™ Three Pole Rod Holder, Black - 325033-1 - 354-3250331F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 3250321 Triple Threat™ Three Pole Rod Holder, White - 325032-1 - 354-3250321F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 322620 Sand Cast Brass Chrome Plated Folding Step | #12 Fastener - 322620-1 - 354-3226201F1
Sand cast brass folding step with chrome plated finish. Use #12 fastener.
Seadog 322150 Anchor Chock - Fits 5 To 20 Lb Anchors - #10 Fastener - 322150-1 - 354-3221501F1
Anchor Chocks help protect the surface of your deck in rough seas or while the boat is underway. Secures the anchor when not in use while still maintaining easy access. Constructed of investment cast 316 stainless steel for durability and corrosion resistance. For use with conventional fluke anchors from 5-20 lbs. Deck mounts with four #10 FH fasteners (not included).
Seadog 322080 Die Cast Brass Chrome Plated Hinged Chain Deck Pipe - #8 Fastener - 322080-1 - 354-3220801F1
Die cast hinged chain pipe with chrome finish. Use #8FH fasteners.
Seadog 322075 Stainless Replacement Cap & Chain - 322075-1 - 354-3220751F1
Replacement Cap & Chain
Seadog 322070 Forged Brass Chrome Plated Chain Deck Pipe With Chain - #8 Fastener - 322070 - 354-322070F1
These Chain Deck Pipes facilitate the storage of anchor lines out of the way below deck, reducing the risk of trip hazards on deck. Chrome plated forged brass construction. Oval deck pipe opening can accommodate a large thimble and line up to 1" in diameter plus the shackle and chain. Chain can remain in slot when the cover is closed. Installs with four #8 FH fasteners (not included).
Seadog 321800 Chain Deck Pipe, Stainless - 321800 - 354-321800F1
Investment cast 316 stainless chain deck pipe. Use #10 fastener.
Seadog 321680 Hatch Spring - Formed 304 Stainless Steel - #10 Fastener - 321680-1 - 354-3216801F1
Hatch spring is made of formed 304 stainless steel with injection molded nylon mounts. Big, heavy-duty spring that is ideal for larger hatches and dock boxes. Strong stainless steel spring with internal safety cable that prevents spring from being overextended during normal use. Mounts heavy-duty molded nylon pads on both ends. Use #10 fastener.
Seadog 321670 Hatch Spring With Internal Cable - Formed 304 Stainless Steel - #10 Fastener - 321670-1 - 354-3216701F1
Hatch spring has an internal wire that prevents the spring from being overextended during normal and is made of formed and stamped 304 stainless steel. Ideal for use on lighter hatches, dock boxes and lazarettes. Not recommended for applications where hatch will scoop wind while boat is under way and overextend spring. Use #10 fastener.
Seadog 3181109 Performance Anchor Trolley Kit - 318110-9 - 354-3181109F1
The Performance Anchor Trolley Kit features a zig cleat for easy, one-handed adjustability. The durable, one-piece cheek blocks operate silently. Easily unclip the custom designed ring and use the system as a leash. Kit includes: 30' of 3/16" polypro deck line (1), zig zag cleat (1), ring clip (1), cheek blocks (2), nylon pad eyes (6), 10-32 X 3/4" PH machine screws (10), 10-32 Nyloc nuts (10), #10 flat washers (10), and well nuts (10).
Seadog 318018 Folding Grapnel Anchor, 18 Lbs. A: 1/2", B:22-1/2", C:5", Boat Length: 18' - 26' , Line/Length: 3/8"/150' Anchor, Chain Length: 1/4"/10'-20' - 318018 - 354-318018F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Seadog 318009 Folding Grapnel Anchor, 9 Lbs A:1/2" , B:18", C:4-1/4". Boat Length: 5'-18', Line/Length:5/16"/120', Chain Length: 3/16"/10'-13' - 318009 - 354-318009F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Seadog 318007 Folding Grapnel Anchor, 7 Lbs. A:1/2" , B:16", C:4-1/4", Boat Length: 5'-16', Line/Length:5/16"/50', Chain Length: 3/16"/7'-10' - 318007 - 354-318007F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Seadog 318005 Folding Grapnel Anchor, 5.5 Lbs. Anchor, A:1/2" , B:14", C:4", Boat Length: 5'-14' , Line/Length:5/16"/50', Chain/Length: 3/16"/7'-10' , - 318005 - 354-318005F1
These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).
Seadog 318003K11 Folding Anchor Kit - Economy - 318003K1-1 - 354-318003K11F1
Economy Folding Anchor Kit includes everything you need to get started. It comes complete with our popular 3.5 lb. folding anchor, 20' of 3/16" line and a handy mesh bag. Constructed of hot dipped galvanized iron with forged flukes. For boats 5'-12' in length.
Seadog 318003K Folding Anchor Kit - Includes Adjustable Float & Stainless Fast Eye Boat Snap - 318003K - 354-318003Kf1
The Folding Anchor Kit features a 3.5 lb. painted hot dipped, galvanized folding grapnel anchor with 25' of 1/4" line, an adjustable float, stainless fast eye boat snap, and storage bag. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats. Inexpensive and easy to store they are also useful as a backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions..
Seadog 314272 Cast Iron River Anchor, Black Vinyl Coated, 13 Lbs. - 314272 - 354-314272F1
Designed specifically for river currents and heavy drift conditions, river anchors are ideal for pontoon and bass boats. The grappling action of the anchors three individual blades offers effective holding power for rivers and mud bottom lakes, even on windy days. The flow-through holes between the blades facilitate easy retrieval. One-piece cast iron construction.
Seadog 300090-3 | Powder Coated Steel Electric 120V Rope Cutter - 300090-3 - 354-3000903F1
Easily cuts nylon, polyester, polypropylene, and Dacron cordage and webbing. This rope cutter cuts and heat seals at the same time. The replaceable blade heats up to 1100° Fahrenheit and 600° Celsius in less than 10 seconds. Includes brass bristle cleaning brush and T-handle Allen wrench for installing the replaceable blade. Comes with 40" heavy duty grounded cord and lighted on/off rocker switch. Base is pre-drilled for permanent mounting on a bench or table. 120VAC @ 50W. ETL certified #5002516.
Seadog 2999811 Straight Release Pin W/Lanyard - 299981-1 - 354-2999811F1
Release Pins feature a quick release with detent ball. Attached lanyard reduces risk of loss. Constructed of corrosion resistant formed 304 stainless steel.
Seadog 299981 Straight Release Pin W/Lanyard, Bulk - 299981 - 354-299981F1
Release Pins feature a quick release with detent ball. Attached lanyard reduces risk of loss. Constructed of corrosion resistant formed 304 stainless steel.
Seadog 2999801 Stepped Release Pin W/Lanyard - 299980-1 - 354-2999801F1
Release Pins feature a quick release with detent ball. Stepped version fits threaded hinge fittings. Attached lanyard reduces risk of loss. Constructed of corrosion resistant formed 304 stainless steel.
Seadog 299190 Canvas Snap Tool | Includes Die Wrench & (3) Removable Dies | Aluminum/Steel - 299190-1 - 354-2991901F1
Includes a die wrench and three removable dies for various snap caps and studs.Aluminum/steel construction. Not for use with heavy duty stainless canvas snaps.
Seadog 2991251 S.S. Windshield Clip, 4 Sets - 299125-1 - 354-2991251F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Seadog 2991241 S.S. Windshield Clip, 4 Sets - 299124-1 - 354-2991241F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Seadog 299120 Canvas Snap Hand Punch & Base, Nickel Plated Brass - 299120-1 - 354-2991201F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Seadog 2991041 Canvas Stud (#8 Wood Screw), Nickel Plated Brass, 5 Sets - 299104-1 - 354-2991041F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Seadog 2991011 Canvas Socket & Back Plate, Nickel Plated Brass, 3 Sets - 299101-1 - 354-2991011F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Seadog 295111 Bow Form, 316 Stainless, 1" - 295111-1 - 354-2951111F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049".
Seadog 2950911 90° Elbow Rail Fitting, 316 Stainless, 1" - 295091-1 - 354-2950911F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049".
Seadog 2950901 90° Elbow, 7/8", 316 Stainless - 295090-1 - 354-2950901F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog 2931011 3-Way Corner Rail Fitting, 316 Stainless, 1" - 293101-1 - 354-2931011F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049".
Seadog 2931001 3-Way Corner, 7/8", 316 Stainless - 293100-1 - 354-2931001F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog 292601 60° Left Tee Rail Fitting, 316 Stainless, 1" - 292601-1 - 354-2926011F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049".
Seadog 2926001 60° Tee, Right, 7/8", 316 Stainless - 292600-1 - 354-2926001F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog 2916011 60° Right Tee Rail Fitting, 316 Stainless, 1" - 291601-1 - 354-2916011F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049".
Seadog 2916001 60° Tee, Left, 7/8", 316 Stainless - 291600-1 - 354-2916001F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog 2909031 90° Tee, Hinged, 7/8", 316 Stainless - 290903-1 - 354-2909031F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog 2909011 90° Universal Tee Rail Fitting, 316 Stainless, 1" - 290901-1 - 354-2909011F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049".
Seadog 2909001 90° Tee, Universal, 7/8", 316 Stainless - 290900-1 - 354-2909001F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog 2906041 90° Hinged Tee Rail Fitting, 316 Stainless, 1" - 290904-1 - 354-2909041F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049".
Seadog 2906011 60° Universal Tee Rail Fitting, 316 Stainless, 1" - 290601-1 - 354-2906011F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049".
Seadog 2906001 60° Tee, Universal, 7/8", 316 Stainless - 290600-1 - 354-2906001F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog 2809011 90° Round Base 1", Stainless - 280901-1 - 354-2809011F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2809001 90° Round Rail Base 7/8", Stainless - 280900-1 - 354-2809001F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2806011 60° Round Base 1", Stainless - 280601-1 - 354-2806011F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2806001 60° Round Rail Base 7/8", Stainless - 280600-1 - 354-2806001F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2804511 45° Round Base 1", Stainless - 280451-1 - 354-2804511F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2804501 45° Round Base 7/8", Stainless - 280450-1 - 354-2804501F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2803011 30° Round Base 1", Stainless - 280301-1 - 354-2803011F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2803001 30° Round Base 7/8", Stainless - 280300-1 - 354-2803001F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2736651 Slide Bracket 2/Cd - 273665-1 - 354-2736651F1
One component of a system of injection molded nylon jaw slide and bracket fittings in a Bimini top fitting system. They are are designed to mount on the side of the gunnel and have the jaw slide snap onto it. The jaw slide then glides along the bracket and is adjusted and secured by the head screw.
Seadog 2736601 Slide Bracket 2/Cd - 273660-1 - 354-2736601F1
One component of a system of injection molded nylon jaw slide and bracket fittings in a Bimini top fitting system. They are are designed to mount on the side of the gunnel and have the jaw slide snap onto it. The jaw slide then glides along the bracket and is adjusted and secured by the head screw.
Seadog 2735681 Head Screw 2/Cd - 273568-1 - 354-2735681F1
One component of a system of injection molded nylon jaw slide and bracket fittings in a Bimini top fitting system. They are are designed to mount on the side of the gunnel and have the jaw slide snap onto it. The jaw slide then glides along the bracket and is adjusted and secured by the head screw. 1/4-28 x 3/4" thread.
Seadog 2735651 Jaw Slide Bracket Mount 2/Cd - 273565-1 - 354-2735651F1
One component of a system of injection molded nylon jaw slide and bracket fittings in a Bimini top fitting system. They are are designed to mount on the side of the gunnel and have the jaw slide snap onto it. The jaw slide then glides along the bracket and is adjusted and secured by the head screw.
Seadog 2702401 Ss Rail Mount Deck Hinge, 1Ea - 270240-1 - 354-2702401F1
These Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. Concave Hinges are designed to rail mount on 1" tubing. These hinges install with two #10 FH fasteners (not included).
Seadog 2702401 Ss Deck Hinge (Rail Mount) W/Removable Pin, 1Ea - 270245-1 - 354-2702451F1
These Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. Concave Hinges are designed to rail mount on 1" tubing. Pin Deck Hinges feature a spring loaded quick release pin for easy top removal. These hinges install with two #10 FH fasteners (not included).
Seadog 2542181 Stud Mount Flanged Grab Rail, Stainless, 19-3/8" - 254218-1 - 354-2542181F1
The stud mounted grab rail features integral 5/16"-18 threaded studs and installs with two 5/16"-18 nuts (not included). Formed of 7/8" 304 stainless steel for corrosion resistance, the design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive with no mounting hardware visible.
Seadog 254212 Stud Mount Flanged Grab Rail, Stainless, 13-1/2" - 254212-1 - 354-2542121F1
The stud mounted grab rail features integral 5/16"-18 threaded studs and installs with two 5/16"-18 nuts (not included). Formed of 7/8" 304 stainless steel for corrosion resistance, the design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive with no mounting hardware visible.
Seadog 2542091 Stud Mount Flanged Grab Rail, Stainless, 10" - 254209-1 - 354-2542091F1
The stud mounted grab rail features integral 5/16"-18 threaded studs and installs with two 5/16"-18 nuts (not included). Formed of 7/8" 304 stainless steel for corrosion resistance, the design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive with no mounting hardware visible.
Seadog 230215 15" 6-Spoke Stainless Steering Wheel W/Plastic Center Cap, 25° Dish - 230215 - 354-230215F1
Formed 304 stainless steel spoke steering wheel with plastic center cap. Steering wheels fit standard 3/4'' tapered shaft.
Seadog 230212G 12", 5-Spoke Stainless Steering Wheel W/Foam Grip & Plastic Center Cap, 25° Dish - 230212G - 354-230212Gf1
Formed 304 stainless steel spoke steering wheel with foam grip and plastic center cap. Steering wheels fit standard 3/4'' tapered shaft.
Seadog 230212 12", 5-Spoke Stainless Steering Wheel W/Plastic Center Cap, 25° Dish - 230212 - 354-230212F1
Formed 304 stainless steel spoke steering wheel with plastic center cap. Steering wheels fit standard 3/4'' tapered shaft.
Seadog 230211 11", 5-Spoke Stainless Steering Wheel W/Plastic Center Cap, 25° Dish - 230211 - 354-230211F1
Formed 304 stainless steel spoke steering wheel with plastic center cap. Steering wheels fit standard 3/4'' tapered shaft.
Seadog 230115 15" 6-Spoke Stainless Steering Wheel W/Plastic Center Cap, 10° Dish - 230115 - 354-230115F1
Formed 304 stainless steel spoke steering wheel with plastic center cap. Steering wheels fit standard 3/4'' tapered shaft.
Seadog 2272621 Nylon Step Handle, Flat Dark Earth - 227262-1 - 354-2272621F1
These UV resistant injection molded nylon Step Handles are designed for use as a lift handle on small boat transoms. Molded with a contoured handle grip, the flat, textured upper surface also allows these handles to be used as a step. Installs with four 1/4" RH fasteners (not included).
Seadog 2272601 Nylon Step Handle, Black - 227260-1 - 354-2272601F1
These UV resistant injection molded nylon Step Handles are designed for use as a lift handle on small boat transoms. Molded with a contoured handle grip, the flat, textured upper surface also allows these handles to be used as a step. Installs with four 1/4" RH fasteners (not included).
Seadog 225420-1 Push Button Cabinet Latch, Rectangular - 225420-1 - 354-2254201F1
Investment Cast 316 Stainless Steel/Chrome Plated Brass. These corrosion resistant 316 stainless steel cabinet latches function as both a latch and handle. Push button operation activates and secures the latch with a simple, deliberate motion. Positive action locking function prevents cabinets from opening while in motion. Easy installation single 3/4" hole to bore. Suitable for left or right-hand side uses. Sleek low-profile design makes them convenient in tight spaces. Great for glove compartments. Includes catch.
Seadog 225400-1 Push Button Cabinet Latch, Oval - 225400-1 - 354-2254001F1
Investment Cast 316 Stainless Steel/Chrome Plated Brass. These corrosion resistant 316 stainless steel cabinet latches function as both a latch and handle. Push button operation activates and secures the latch with a simple, deliberate motion. Positive action locking function prevents cabinets from opening while in motion. Easy installation single 3/4" hole to bore. Suitable for left or right-hand side uses. Sleek low-profile design makes them convenient in tight spaces. Great for glove compartments. Includes catch.
Seadog 225320 Push Button Rim Latch - Square / Round | Stainless/Plastic Housing - 225320-1 - 354-2253201F1
Constructed of sturdy plastic with a corrosion resistant 304 stainless steel knob. Streamlined design features a positive action closure ensuring cabinets and drawers stay closed until the button is deliberately pushed. . Latch installs with two #6 RH fasteners; strike plates require two #4 FH fasteners (fasteners not included).
