Sea-Dog Line
Seadog 429910 Deluxe 22 To 10 Gauge Terminal Crimper Tool - Powder Coated Steel - 429910-1 - 354-4299101F1
Deluxe Terminal Crimper tool is designed for use with standard nylon terminal connectors. This deluxe, double ratchet crimper strips and crimps wire from 22-10 gauge. Ratchet action ensures correct crimping pressure. Constructed of powder coated steel. A great addition to any tool box.
Seadog 429920 Heat Shrink 22 To 10 Gauge Terminal Crimper Tool - Powder Coated & Stainless Steel - 429920-1 - 354-4299201F1
Premium Heat Shrink Crimper tool is designed for use with heat shrink terminals. This high end, single ratchet crimper strips and crimps wire from 22-10 gauge. Ratchet action ensures correct crimping pressure. Constructed of powder coated steel. A great addition to any tool box.
Seadog 429930 Adjustable 24 To 12 Gauge Wire Stripper & Cutter Tool - Powder Coated Steel - 429930-1 - 354-4299301F1
This professional grade Adjustable Wire Stripper & Cutter tool is two tools in one. Self-adjusting and easy to use, it strips or cuts 24-10 gauge wire with ease. Constructed of powder coated steel. A great addition to any tool box.
Seadog 4310503 Push Button Remote Wireless Horn Switch - 431050-3 - 354-4310503F1
Remote Wireless Momentary Push Button Horn Switch activates by pushing button transmitter to send a signal to the receiver to activate your existing horn. Receiver connects to your existing horn switch wiring for an easy installation. Transmitter button uses CR2032 battery (included) and installs to steering wheel center cap either by double back tape or two #8 fasteners (included). 12V, 20A Max.
Seadog 431125 Max Blast Twin Mini 6 Amp 12V Compact Horn - Stamped 304 Stainless Cover - 431125-1 - 354-4311251F1
MaxBlast Twin Mini Compact Horn is constructed with an injection molded housing under the stamped 304 stainless steel cover, which protects the the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Mounting bracket can be used as a wiring template. When installed, horns should point slightly downward to permit water drainage. At 111 decibels and a frequency (Hz) of 490°20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. Five-year rust-free warranty. 12VDC. NMMA Type Accepted #2577062.
Seadog 431210 Drop In 3 Amp 105 Db Horn V.1 With Grills | Powder Coated Steel & Injected Molded Nylon - 431210-1 - 354-4312101F1
Powder coated steel/injected molded nylon. Includes V.1 Horn meets ABYC standard A-23. For use on vessels under 39'.
Seadog 431230 Drop In 4 Amp 108 Db Horn V.2 With Grills | Powder Coated Steel & Injected Molded Nylon - 431230-1 - 354-4312301F1
Drop-In Hidden Horn V.2 with Grills is constructed of powder coated steel and injection molded nylon. Kit includes horn plus one chrome and one white decorative billet snap-in grill. Hole size 1-7/8" x 3-3/8". At 108 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577065.
Seadog 431250 Drop In 4 Amp 111 Db Horn V.3 With Grills | Powder Coated Steel & Injected Molded Nylon - 431250-1 - 354-4312501F1
Drop-In Hidden Horn V.3 with Grills is constructed of powder coated steel and injection molded nylon. Kit includes horn plus one chrome and one white decorative billet screw-in grill. Hole size 2-3/4" diameter. At 111 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577066.
Seadog 431310 Black Finish Hidden Mount 3 Amp 107 Db Mini Compact Horn | Powder Coated Steel - 431310-1 - 354-4313101F1
Hidden Mount Mini Compact Horn is constructed of powder coated steel. At 107 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577068.
Seadog 431410 Black Finish 3 Amp 107 Db Mini Compact Horn & Bracket | Powder Coated Steel | 3-5/16" X 3-5/8" X 4" - 431410 - 354-431410F1
Mini Compact Horn with Bracket is constructed of powder coated steel. Includes mounting bracket. At 107 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577067.
Seadog 431430-1 Pontoon Boat 12V Mini Compact Horn W/Bracket - 431430-1 - 354-4314301F1
Pontoon Boat Mini Compact Horn with Bracket is constructed of powder coated steel. Includes 304 stainless steel bracket for easy mounting. Recommended for fresh water applications. At 111 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2601746.
Seadog 431510 Maxblast 5 Amp 118 Db 12V Single 16" Trumpet Horn - Stainless & Molded Motor Housing - 431510-1 - 354-4315101F1
MaxBlast Single Trumpet Horn features a prewired, sealed sound unit. Constructed with an over molded motor housing under a stamped 304 stainless steel exterior and diaphragm, which protects the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Horn wiring has no polarity, negative or positive can be attached to either wire. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 118 decibels and a frequency (Hz) of 390°15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 5-year warranty. NMMA Type Accepted #2577069 & 2577070.
Seadog 431520 Maxblast 10 Amp 123 Db 12V Dual 18-1/4" Trumpet Horn - Stainless & Molded Motor Housing - 431520-1 - 354-4315201F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 431530 Maxblast 2.5 Amp 118 Db 24V Single 16" Trumpet Horn - Stainless & Molded Motor Housing - 431530-1 - 354-4315301F1
MaxBlast Single Trumpet Horn features a prewired, sealed sound unit. Constructed with an over molded motor housing under a stamped 304 stainless steel exterior and diaphragm, which protects the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Horn wiring has no polarity, negative or positive can be attached to either wire. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 118 decibels and a frequency (Hz) of 390°15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 5-year warranty. NMMA Type Accepted #2577069 & 2577070.
Seadog 431540 Maxblast 5 Amp 123 Db 24V Dual 18-1/4" Trumpet Horn - Stainless & Molded Motor Housing - 431540-1 - 354-4315401F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 431610 Compact 3.5 Amp 110 Db 12V Single 14" Trumpet Horn - Stamped 304 Stainless - 431610-1 - 354-4316101F1
Compact Single Trumpet Horn features a prewired, sealed sound unit is constructed of 100% stainless steel exterior with a 304 stainless steel diaphragm. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 460±15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577071.
Seadog 431620 Compact 7 Amp 112 Db 12V Dual 16" Trumpet Horn - Stamped 304 Stainless - 431620-1 - 354-4316201F1
Compact Dual Trumpet Horn features a prewired, sealed sound unit is constructed of 100% stainless steel exterior with a 304 stainless steel diaphragm. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 110 decibels and a frequency (Hz) of 460±15/415±15, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577072.
Seadog 432510 Maxblast 20 Amp 120 Db 12V 11 Psi Single 17" Trumpet Air Horn - Chrome Plated Brass - 432510-1 - 354-4325101F1
MaxBlast Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 120 decibels and a frequency (Hz) of 315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577054.
Seadog 432520 Maxblast 20 Amp 121 Db 12V 11 Psi Dual 17" Trumpet Air Horn - Chrome Plated Brass - 432520-1 - 354-4325201F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 432590 Trumpet Horn Tube Cover | Fits All Sea-Dog Air Horns & Max Blast Electric Trumpet Horns - 432590-1 - 354-4325901F1
Stainless steel trumpet tube cover fits all Sea-Dog air horns and the Max Blast electric trumpet horns. Keeps green water and bugs from getting into the trumpet tube, and snaps over the end of the tube - No tools necessary. 304 Stainless.
Seadog 432597 Universal 20 Amp 11 Psi 12V Air Horn Compressor With Side Air Exit - Fits Sea-Dog Maxblast Air Horns - 432597-1 - 354-4325971F1
Universal Air Horn Compressor with Side Air Exit works with all Sea-Dog® MaxBlast air horns. For use in tight installation applications where a side air hose attachment is required. Does not include air tubing or mounting hardware. 12VDC. Maximum: 20A.
Seadog 432620 Maxblast 20 Amp 125 Db 12V 11 Psi Dual 9-5/8" Trumpet Air Horn - Chrome Plated Brass - 432620-1 - 354-4326201F1
MaxBlast Mini Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 125 decibels and a frequency (Hz) of 630±15A/525±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577058.
Seadog 4410351 Bulb, Festoon - 441035-1 - 354-4410351F1
Festoon Light Bulbs are double ended bulbs that resemble AGC style glass fuses and are often used for marine navigation lighting. They give off a warm, incandescent white light. Nickel plated brass tips for corrosion resistance and positive contact. Heavy duty glass bulb housing and filaments for break resistance and longevity. 12.8VDC.
Seadog 4418161 Mr16 Halogen Bulb With Reflector, 12V, 10W - 441816-1 - 354-4418161F1
Bi-pin base MR-16 halogen bulbs with glass reflectors. 12.8 VDC.
Seadog 4418901 Halogen Light Bulb, 1 Pr. - 441890-1 - 354-4418901F1
JC type, bi-pin, G4 style halogen bulbs. 10W, 350 candlepower. 12.8 VDC.
Seadog 4418911 Halogen Light Bulb, 1 Pr. - 441891-1 - 354-4418911F1
JC type, bi-pin, G4 style halogen bulbs. 20W, 700 candlepower. 12.8 VDC.
Seadog 4420411 Bayonet Base G4 Adapter, Single Contact - 442041-1 - 354-4420411F1
Nickel plated brass. Adapts any G4 bi-pin style halogen bulb to a BA15S single contact bayonet base for use in standard marine light sockets.
Seadog 4420421 Bayonet Base G4 Adapter, Double Contact - 442042-1 - 354-4420421F1
Nickel plated brass. Adapts any G4 bi-pin style halogen bulb to a BA15D double contact bayonet base for use in standard marine light sockets.
Seadog 4421311 Nickel Plated Brass 1 Led White Lights 12.8V .5 Watt Sealed Festoon - 442131-1 - 354-4421311F1
Nickel plated brass. 12V, 40 mA. LED Festoon is recommended for indoor use only.
Seadog 442142 Nickel Plated Brass 2 Led White Lights 12.8V .8 Watt Sealed Festoon - 442142-1 - 354-4421421F1
Nickel Plated Brass. 12V, 70 mA. LED Festoon is recommended for indoor use only.
Seadog 442431 Nickel Plated Brass 4 Led White Lights 12.8V .4 Watt All Around Festoon - 442431-1 - 354-4424311F1
Nickel Plated Brass. 12V, 30 mA. All Around LED Festoon is for interior installations only.
Seadog 442436 Nickel Plated Brass 8 Led White Lights 12.8V .6 Watt All Around Festoon - 442436-1 - 354-4424361F1
Nickel Plated Brass. 12V, 55 mA. All Around LED Festoon is for interior installations only.
Seadog 442439 Nickel Plated Brass 8 Led White Lights 12.8V .7 Watt All Around Festoon - 442439-1 - 354-4424391F1
Nickel Plated Brass. 12V, 60 mA. All Around LED Festoon is for interior installations only.
Seadog 442444 Nickel Plated Brass 12 Led White Lights 12.8V 1 Watt All Around Festoon - 442444-1 - 354-4424441F1
Nickel Plated Brass. 12V, 80 mA. All Around LED Festoon is for interior installations only.
Seadog 4426421 Led G4 Base Bulb - 442642-1 - 354-4426421F1
These Warm White LED G4 Base Bulbs features a bi-pin base with 13 high quality LEDs that produce 225 lumens. The equivalent of a 15W halogen bulb with an energy efficient 2W power consumption. These bulbs boast 360° omnidirectional light distribution and 50,000 service life hours. For use with 12VDC systems only.
Seadog 4426431 Led G4 Base Bulb - 442643-1 - 354-4426431F1
These Warm White LED G4 Base Bulbs features a bi-pin base with 18 high quality LEDs that produce 290 lumens. The equivalent of a 20W halogen bulb with an energy efficient 3W power consumption. These bulbs boast 360° omnidirectional light distribution and 50,000 service life hours. For use with 12VDC systems only.
Seadog 4429421 Led G4 Base Wafer Bulb, Horizontal Pins - 442942-1 - 354-4429421F1
These G4 lamps feature 12 high quality LEDs that produce 200 lumens. Bi-pin base for easy plug and play installation. Mounted on one side of the disc, these LEDs offer direct 120° illumination with no wasted light. The equivalent of a 20-watt halogen bulb with an energy efficient 2.4-watt power consumption. Rated for 50,000 life hours. For use with 12VDC systems only. Nickel plated brass/plastic.
Seadog 4429471 Led G4 Base Wafer Bulb, Vertical Pins - 442947-1 - 354-4429471F1
These G4 lamps feature 12 high quality LEDs that produce 200 lumens. Bi-pin base for easy plug and play installation. Mounted on one side of the disc, these LEDs offer direct 120° illumination with no wasted light. The equivalent of a 20-watt halogen bulb with an energy efficient 2.4-watt power consumption. Rated for 50,000 life hours. For use with 12VDC systems only. Nickel plated brass/plastic.
Seadog 4451881 Fuse Block W/Negative Buss & Led Indicator Lights, 12-Terminals - 445188-1 - 354-4451881F1
Red LED lights indicate when fuse is blown or missingUses ATO/ATC & ATM fuses 1A-30AMain line terminal rating is 100A 32VDC max, with M5 metric threaded studsSingle line terminal rating is 30A 32VD, with M4 metric threaded studsTerminals are nickel plated copper with stainless steel screwsIncludes fuse block cover and 71 labelsInstalls with four #8 FH fasteners (not included)
Seadog 450110 Abs Housing Clamp On 12V Mount Fan | 5-5/16" X 4-1/4" X 4-5/8" - 450110-1 - 354-4501101F1
Clamp-On Mount Fan is constructed of impact resistant ABS plastic. Can be mounted almost anywhere. 6 foot cord plugs into a 12VDC power socket. Features an integral high/low speed switch. Amps: high 0.38A, low 0.28A. Watts: high 4.5W, low 3.4W.
Seadog 491055 Boat Hook Mooring Buoy Snap Kit - #8 Fastener - Cast 316 & 304 Stamped Stainless - 491055-1 - 354-4910551F1
The Boat Hook Mooring Buoy Snap Kit is the convenient and easy solution for attaching a mooring line to a buoy or cleat. Using the included keeper plate, these channeled 316 stainless steel snaps fit onto the end of boat hooks or other poles, turning a challenging task into a quick and simple process. The kit includes the snap hook, keeper plate, and fasteners for attaching the keeper plate. Sea-Dog® Boat Hooks have pre-drilled mounting holes for easy installation. Truly an advantage on high bowed vessels by simply reaching out with the boat pole, hook the carabiner on the inside of the attachment point, then pull back on the boat pole. The carabiner snaps shut as it slides free of the pole, securely clipping to the mooring eye or cleat.
Seadog 491105 Boat Hook Universal Thread 15" Microfiber Mop - 491105-1 - 354-4911051F1
Boat Hook Microfiber Mop provides gentle and effective cleaning action with its soft straps. The fast-drying microfiber is highly absorbent and scratch resistant, preventing water spots. Fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices.
Seadog 4911081 Boat Hook Hull Scraper - 491108-1 - 354-4911081F1
Boat Hook Hull Scraper can be attached to any Sea-Dog® Boat Hook/Boat Pole or universal/Acme threaded device. Great for waterline cleaning from inside the vessel.
Seadog 491115 Boat Hook Mooring Cover Support Crown 1" X 15' Webbing Strap Kit, Pack Of 3 Straps - 491115-1 - 354-4911151F1
These Boat Hook Mooring Cover Support Crown Webbing Straps are used for positioning the Mooring Cover Support Crown (491110-1) securely in place. Includes three 15' straps, with a securing loop on one end and an adjustable snap clip on the other. They are designed to set once and then clipping in and out later for ease of use.
Seadog 491713 Flush Mount 25 Degree Flag Pole Socket | #12 Fastener | Investment Cast 316 Stainless - 491713-1 - 354-4917131F1
25° Flush Mount Flagpole Socket is used for flagpoles up to 1-1/4" in diameter. Maximum speed 10 MPH. Constructed of investment cast 316 stainless. Installs with three #12 FH fasteners (not included).
Seadog 492213 Flagpole 10 Degree Socket | #10 Fastener | Sand Cast Brass Chrome Plated - 492213-1 - 354-4922131F1
10° Flagpole Socket is used for flagpoles up to 1-1/4" in diameter. Maximum speed 10 MPH. Constructed of chrome plated sand cast brass for durability and corrosion resistance. Installs with three FH fasteners (not included).
Seadog 5010723 Premium Electric Oil Pump, 12V - 501072-3 - 354-5010723F1
This portable, lightweight Premium Electric Oil Pump is easy to use and transport. The self-priming 12V pump attaches to battery terminals with alligator clips and drains oil through the dipstick tube on outboards and sterndrives. Convenient DIY operation saves money on expensive oil changes. Its compact size makes it is easy to store. Includes 48" inlet and 80" outlet hoses. Oil flow 0.2 liters per minute. Diesel flow 1.5 liters per minute. 12VDC. 60W. Maximum run time 30 minutes.NOT intended for commercial use. NOT suitable for pumping out transmission oil, water, or flammable liquids.
Seadog 502150H1 Lower Unit Standard Pump - 502150H-1 - 354-502150H1F1
Nylon/aluminum. Standard Pump fits quart oil bottles. Flexible hose gets to hard to reach locations. Threaded (3/8"-16) fitting fits Mercruiser, OMC, Evinrude, Johnson, Honda (70hp & up), Volvo, Force, Mercury (US origin models) and Gamefisher lower units. Includes Yamaha adapter (8mm-1.25) fitting for Mercury (Japanese origin models), Yamaha, Nissan, Tohatsu, Honda.
Seadog 512110 Fresh Water Inlet | #8 Fastener | Brass Chrome Plated | Includes Cap & Chain - 512110-1 - 354-5121101F1
Designed to provide a fresh water hookup to a pressurized water system while moored. Has standard female swivel hose connector. Complete with black plastic, water tight plug when not connected to on shore water. Pipe size: 1/2" FIPT x 3/4" FGHT. Uses #8 fastener.
Seadog 512120 Washdown Water Outlet | #8 Fastener | Brass Chrome Plated | Includes Cap & Chain - 512120-1 - 354-5121201F1
Allows for garden hose hookup to on board water system for use as washdown system. Standard male hose connector. Requires separate ball or gate valve to regulate water flow. 1/2" FIPT x 3/4" MGHT.
Seadog 517526 Straight 2" Style Sink Drain With Strainer - 517526-1 - 354-5175261F1
Sea-Dog sink drain with strainer includes 5/8" barb on drain.
Seadog 520060 Captive Garboard Drain & Plug | #8 Fastener | Investment Cast 316 Stainless - 520060 - 354-520060F1
This Captive Garboard Drain & Plug is a direct replacement for the bronze, traditional style Sea-Dog® Garboards (520040 and 520042). Captive plug prevents plug from being lost. Constructed of investment cast 316 stainless steel. Installs with three #8 FH fasteners (not included).
Seadog 520080 Brass Tee Handle Drain Plug, 1" Bulk - 520080 - 354-520080F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stamped brass with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 5200801 Brass Tee Handle Drain Plug, 1" - 520080-1 - 354-5200801F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stamped brass with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 5200805 Brass Tee Handle Drain Plug, 1", 30 Pc Display - 520080-5 - 354-5200805F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stamped brass with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 5200821 Brass Tee Handle Drain Plug, 1-1/4" - 520082-1 - 354-5200821F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stamped brass with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 5200851 Stainless Tee Handle Drain Plug, 1" - 520085-1 - 354-5200851F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stainless steel with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 5200855 Stainless Tee Handle Drain Plug, 1", 25 Pc Display - 520085-5 - 354-5200855F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stainless steel with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 5200861 Stainless Tee Handle Drain Plug, 1-1/4" - 520086-1 - 354-5200861F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stainless steel with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 5208501 Drip Guard For 520750 3/4 Thru-Hull - 520850-1 - 354-5208501F1
Thru-Hull Drip Guard fits Sea-Dog #520750 3/4 thru-hull. Stops ugly black streaks from staining the side of your boat. Made of Nitrile-Buna black rubber.
Seadog 521550 Telescoping 15-1/2" To 24-1/2" Inboard Motor Flusher - Molded Rubber & Aluminum - 521550-1 - 354-5215501F1
Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine's service life. Easy-to-use by fitting the rubber cup over the water intake, connecting a garden hose, and extending the aluminum leg to seal the cup to the hull. Fresh water flushes the cooling system, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an inboard engine out of the water.
Seadog 5216301 Motor Well Boot, 3" W/Ring - 521630-1 - 354-5216301F1
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (not included).
Seadog 5216551 Motor Well Boot, 5-1/2" - 521655-1 - 354-5216551F1
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (not included).
Seadog 521663-1 Motor Well Boot - 4-1/8" Split - 521663-1 - 354-5216631F1
Molded rubber/injection molded nylon. Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. #8 RH Fastener.
Seadog 521664-1 Motor Well Boot - 5-1/2" Split - 521664-1 - 354-5216641F1
Molded rubber/injection molded nylon. Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. #8 RH Fastener.
Seadog 563255 Cast 17-4Ph Grade Stainless Adjustable Wrench - Includes 1/4" Hex Head & Bottle Opener - 563255-1 - 354-5632551F1
Stainless steel adjustable wrench is made to last a lifetime under any conditions. Includes, 1/4" hex head and bottle opener. Cast 17-4ph stainless.
Seadog 5801011 Adjustable Oar Collars - Fits Standard Oars - Injection Molded Polypropylene, 1 Pr. - 580101-1 - 354-5801011F1
These Adjustable Oar Collars fit standard oars, but can be trimmed for smaller ones. These collars cushion stroke, reduce noise, and prevent wear. Split cover makes it quick and easy to install with brass nails (included). Constructed of rugged, flexible polyethylene.
Seadog 5805701 Brass Round Horn Oarlocks, Pr. - 580570-1 - 354-5805701F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5805901 Brass Round Horn Oarlocks, Pr. - 580590-1 - 354-5805901F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5805911 Brass Round Horn Oarlocks, A: 1/2" B: 2-1/8" - 580591-1 - 354-5805911F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5806001 Brass Oarlock Sockets, Top Mt., Pr. - 580600-1 - 354-5806001F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 5806101 Brass Oarlock Sockets, Side Mt., A:1/2" B: 3-5/8" - 580610-1 - 354-5806101F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 5806201 Bronze Angle Mount Oarlock Socket, A: 1/2" C:1-1/16" - 580620-1 - 354-5806201F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 582501 Portable Emergency 5 Step Boarding Ladder, High-Visibility Orange Polycarbonate & Nylon Rope - 582501-1 - 354-5825011F1
These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 lbs.
Seadog 5825031 Portable Emergency 3 Step Boarding Ladder, High-Visibility Orange Polycarbonate & Nylon Rope - 582503-1 - 354-5825031F1
These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 lbs.
Seadog 588060 Flush Mt Drink Holder Combo Black - 588060 - 354-588060F1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Installation requires a 3-3/4" diameter hole. All holders (except 588060NH) include drain holes. Available in black, white, or gray. Constructed of impact resistant injection molded ABS.
Seadog 588060N Flush Mount Combo Drink Holder W/Drain Fitting, Black - 588060N - 354-588060Nf1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Integral drain fitting allows water to be drained directly into the bilge with the use of 1/4" tubing (not included). Requires a 3-3/4" diameter hole for installation. Available in black or white (or gray by special order). Constructed of impact resistant injection molded ABS.
Seadog 588061 Flush Mt Drink Holder Combo White - 588061 - 354-588061F1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Installation requires a 3-3/4" diameter hole. All holders (except 588060NH) include drain holes. Available in black, white, or gray. Constructed of impact resistant injection molded ABS.
Seadog 588061N Flush Mount Combo Drink Holder W/Drain Fitting, White - 588061N - 354-588061Nf1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Integral drain fitting allows water to be drained directly into the bilge with the use of 1/4" tubing (not included). Requires a 3-3/4" diameter hole for installation. Available in black or white (or gray by special order). Constructed of impact resistant injection molded ABS.
Seadog 588250 Stainless Steel Drink Holder - Adjusts For Containers With 2-3/8" To 3-7/8" Diameter. #8 Fastener - 588250-1 - 354-5882501F1
Adjustable Folding Drink Holder folds to a closed depth of 3/4. Accommodates drink containers up to 3-7/8" in diameter. Corrosion resistant stamped 304 stainless steel construction. Installs with two #8 RH fasteners (not included).
Seadog 604080 It Floats™ - Locking Winch Handle, 8" - 604080 - 354-604080F1
It Floats™ Locking Winch Handle's patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load.
Seadog 604100 It Floats™ - Locking Winch Handle, 10" - 604100 - 354-604100F1
It Floats™ Locking Winch Handle's patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load.
Seadog 660020 Impeller Puller | 3-3/4" X 6-3/8" X 7/16" | Investment Cast 316 Stainless - 660020-1 - 354-6600201F1
Allows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump.
Seadog 6714601 Hammock Hooks - Stainless, 2/Cd - 671460-1 - 354-6714601F1
Hammock Hooks are designed with an extra bend for additional holding power. Ideal for fender and lashing hook applications. Corrosion resistant stamped 304 stainless steel construction. Installs with two #6 FH fasteners (not included).
Seadog 6725601 Fender Hook, Sold Each - 672560-1 - 354-6725601F1
This Fender Hook can be used for quick and easy placement of fenders. Designed to be installed on the gunwale for use with up to 3/8" line. The spring loaded hook keeps line captive against surface. Constructed of corrosion resistant investment cast 316 stainless steel with rubber gasket. Requires two #8 FH fasteners (not included).
Seadog 7271303 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727130-3 - 354-7271303F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271323 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727132-3 - 354-7271323F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271353 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727135-3 - 354-7271353F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271373 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White - 727137-3 - 354-7271373F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271403 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727140-3 - 354-7271403F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271423 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727142-3 - 354-7271423F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271453 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727145-3 - 354-7271453F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog Adjustable Pantographic Wiper Arm - 304 Stainless Steel - Black Finish - 413322-1 - 354-4133221F1
Adjustable Pantographic Wiper Arm for use on standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Formed 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm - Hook Style, 13"-18" - 413368B-1 - 354-413368B1F1
Adjustable J-Hook (automotive style) Pantograph Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm - Hook Style, 19"-24" - 413374B-1 - 354-413374B1F1
Adjustable J-Hook (automotive style) Pantograph Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm | 304 Stainless Steel | Black Finish - 413317-1 - 354-4133171F1
Adjustable Pantographic Wiper Arm for use on standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5" and 2.5" shafts. Formed 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm | 304 Stainless Steel | Black Finish - 413319-1 - 354-4133191F1
Adjustable Pantographic Wiper Arm for use on standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5" and 2.5" shafts. Formed 304 stainless steel construction.
Seadog Adjustable Rail Mount Flagpole | Injection Molded Nylon / Stainless - 327122-1 - 354-3271221F1
Rail mount flagpole made of highly polished, heavy wall stainless steel tubing. The flag is attached to the flagpole using nylon pennant mounts with stainless steel spring wire quick release clips which are designed to hold their shape after continued use. Both pennant mounts can move either direction on the flagpoles allowing flexibility in mounting various sizes of flags.328190 Nylon Adjustable Flag Pole Mounts328195 Stainless Flag Pole Hole Mount Pennant Clips
Seadog Adjustable Rail Mount Flagpole | Injection Molded Nylon / Stainless - 327124-1 - 354-3271241F1
Rail mount flagpole made of highly polished, heavy wall stainless steel tubing. The flag is attached to the flagpole using nylon pennant mounts with stainless steel spring wire quick release clips which are designed to hold their shape after continued use. Both pennant mounts can move either direction on the flagpoles allowing flexibility in mounting various sizes of flags.328190 Nylon Adjustable Flag Pole Mounts328195 Stainless Flag Pole Hole Mount Pennant Clips
Seadog Adjustable Wiper Arm - Formed 304 Stainless Steel - Black Finish - 413111B-1 - 354-413111B1F1
Formed 304 stainless steel adjustable wiper arm.
