Sea-Dog Line
Seadog Rail Mount 11-3/4" Rod Holder - Fits 7/8" To 1" Tubing - 327161-1 - 354-3271611F1
Constructed of injection molded polypropylene with a front mount adjustment screw. This allows easy adjustment without having to disassemble the rail mount brackets. A leash on the rod and/or reel is recommended when using rail mount rod holders. Accommodates rods up to 1-3/4".
Seadog Rail Mount Dual Boat Fender Holder Storage Rack - 7/8" To 1" - 327357-1 - 354-3273571F1
Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use.
Seadog Rail Mount Dual Boat Fender Holder Storage Rack - 7/8" To 1" - 327359-1 - 354-3273591F1
Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use.
Seadog Rail Mount Dual Boat Fender Holder Storage Rack - 7/8" To 1" - 327361-1 - 354-3273611F1
Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use.
Seadog Replacement Cap & Gasket - 325239-1 - 354-3252391F1
Fits 325175 & 325235 rod holders.
Seadog Side Light - 2-7/8" X 2-3/16" X 2-1/8" - Injection Molded Polycarbonate & Stamped Stainless Steel - 400003-1 - 354-4000031F1
For replacement of existing lighting (not for new construction). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for navigation lights for more information.
Seadog Side Light - 2-7/8" X 2-3/16" X 2-1/8" - Injection Molded Polycarbonate & Stamped Stainless Steel - 400004-1 - 354-4000041F1
For replacement of existing lighting (not for new construction). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for navigation lights for more information.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431151-1 - 354-4311511F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431152-1 - 354-4311521F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431153-1 - 354-4311531F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412111B-3 - 354-412111B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412118B-3 - 354-412118B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412121B-3 - 354-412121B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412128B-3 - 354-412128B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412131B-3 - 354-412131B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412138B-3 - 354-412138B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412118W-3 - 354-412118W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412121W-3 - 354-412121W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412128W-3 - 354-412128W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412138W-3 - 354-412138W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 24V Mrv Wiper Motor | Black Finish - 412171B-3 - 354-412171B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 24V Mrv Wiper Motor | Black Finish - 412178B-3 - 354-412178B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & Stainless Standard 12V Wiper Motor | 2-1/2" Shaft | Black Finish - 412321B-3 - 354-412321B3F1
Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm/blade combination (21" total length) using standard wiper arms. Same footprint as competitive standard wiper motors. Black only. CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & Stainless Standard 12V Wiper Motor | 2-1/2" Shaft | Black Finish - 412328B-3 - 354-412328B3F1
Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm/blade combination (21" total length) using standard wiper arms. Same footprint as competitive standard wiper motors. Black only. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | Black Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412421B-1 - 354-412421B1F1
Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | Black Motor Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412428B-1 - 354-412428B1F1
Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | White Motor Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412421W-1 - 354-412421W1F1
Includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. IP66 rating. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | White Motor Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412428W-1 - 354-412428W1F1
Includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. IP66 rating. CE approved. 3-year warranty.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254106-1 - 354-2541061F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254118-1 - 354-2541181F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254124-1 - 354-2541241F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stud Style Transom Mount Ski Tow - 371631-1 - 354-3716311F1
The Stud Style Transom Mount Ski Tow is constructed of AISI formed 316 stainless steel rod for corrosion resistance and durability. Designed to bolt through the transom for maximum strength.
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254312-1 - 354-2543121F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254318-1 - 354-2543181F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254324-1 - 354-2543241F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
Seadog Swivel Drink Holder - 588130-3 - 354-5881303F1
Swivel Drink Holder features a quick release bracket for easy removal. Includes foam insulator, two wall brackets for flexible placement, and installation fasteners. Fits most cans, glasses, and mugs with handles. Chrome plated brass wire construction.
Seadog Synchronized Wiper Controller - 414800-3 - 354-4148003F1
Synchronized Wiper Control will sync up to three motors and adds an interval speed position to the traditional two-speed motor. One short push takes the motors from interval, to slow, to fast speed. One long push activates the primary motor only. Capable of operating a washer system like the Sea-Dog® Windshield Washer Kit (414900-3). Includes synchronized controller, switch, and 5' wiring harness. Overload protected. CE Approved.
Seadog T-Handle Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 2" Diameter - 221972 - 354-221972F1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog T-Handle Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 2" Diameter - 221972L - 354-221972Lf1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Take-Apart Hinge | Investment Cast 316 Stainless Steel | #10 Fastener | 3-1/2" X 2" - 205270-1 - 354-2052701F1
Corrosion resistant cast 316 stainless Take-Apart Hinges allow a door or lid to be removed after installation without having to remove the fasteners. Surface mounted. Can be used horizontally or vertically. Installs with four #10 FH fasteners (not included).
Seadog Take-Apart Hinge | Investment Cast 316 Stainless Steel | #10 Fastener | 3-1/2" X 2" - 205275-1 - 354-2052751F1
Corrosion resistant cast 316 stainless Take-Apart Hinges allow a door or lid to be removed after installation without having to remove the fasteners. Surface mounted. Can be used horizontally or vertically. Installs with four #10 FH fasteners (not included).
Seadog Vent Plug, 5/Pk - 337360-1 - 354-3373601F1
Vent Plugs are constructed of corrosion resistant injection molded nylon. Designed to press fit into a 1" diameter round hole. Ideal for venting areas that may be subjected to heat or moisture build-up. Vent area 0.11 in2.
Seadog Vertical Mount Side Lights, 1 Pr. - 400160-1 - 354-4001601F1
Side Mount Lights are constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog Wall Switch Panel W/1 Switch - 403010-1 - 354-4030101F1
Wall Switch Panel includes black SPDT switch rated at 15 amps each. 304 Stainless panel.
Seadog Wall Switch Panel W/2 Switches - 403020-1 - 354-4030201F1
Wall Switch Panel includes black SPDT switches rated at 15 amps each. 304 Stainless panel.
Seadog Waterproof Led Combination Bow Light - Uscg 1 Nm Approved - #8 Fastener - 67 Ip Rating - 400059-1 - 354-4000591F1
Cast stainless steel base with stamped stainless steel cover. Approved for USCG 2 nautical miles. Use 2 #10 FH fasteners.
Seadog Waterproof Led Combination Bow Light | Uscg 1 Nm Approved | #8 Fastener | 67 Ip Rating - 400058-1 - 354-4000581F1
Black LED Combination Bow Light 400058 is approved for USCG 1 NM (Colreg 1 mile) and is constructed of injection molded ABS with a Zamak base. Installs with two #8 RH fasteners (not included). IP67 waterproof rating. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 2" Diameter - 221962 - 354-221962F1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Waterproof this latch includes a pair of seals to prevent water from passing through the latch. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 2" Diameter - 221962L - 354-221962Lf1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Waterproof this latch includes a pair of seals to prevent water from passing through the latch. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Webbing Cam Cast 304 Stainless Steel Buckle & 1" X 8' Strap - 199121-1 - 354-1991211F1
Webbing cam cast 304 stainless steel buckle & 1" x 8' strap.
Seadog Webbing Cam Cast 304 Stainless Steel Buckle & 1" X 8' Strap - 199122-1 - 354-1991221F1
Webbing cam cast 304 stainless steel buckle & 1" x 8' strap.
Seadog Weldable Bow Eye, Cast Aluminum - 79710 - 354-079710F1
Weldable bow eyes are designed to add or replace a tie-down point on your boat's bow. Sand cast aluminum construction, for maximum corrosion resistance and durability. Weldable for permanent installations. Designed for use on aluminum vessels. Cast 356-T6 Aluminum. This alloy contains lead.
Seadog Wiper Blade - 304 Stainless Steel - Black Finish - 414212B-1 - 354-414212B1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Seadog Wiper Blade - 304 Stainless Steel - Black Finish - 414214B-1 - 354-414214B1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Seadog Wiper Blade - 304 Stainless Steel - Black Finish - 414216B-1 - 354-414216B1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Seadog Wiper Blade - 304 Stainless Steel - Black Finish - 414218B-1 - 354-414218B1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Seadog Wiper Blade - 304 Stainless Steel - Black Finish - 414220B-1 - 354-414220B1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Seadog Wiper Blade - 304 Stainless Steel - Black Finish - 414222B-1 - 354-414222B1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Seadog Xxx Usb 3.0 & Usb-C Power Plug W/Volt Meter - 426514-1 - 354-4265141F1
USB 3.0 & USB-C Power Plug with Volt Meter charges two devices simultaneously while the LED screen displays voltage status. Can be used on a boat, car, or RV. Total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. This portable version fits all Sea-Dog® Power Sockets and any standard 12V receptacle. Constructed of aluminum and injection molded nylon. Output DC: 5V/6A. Input: 12-24 VDC. Blue LED display. FCC, CE, RoHS compliant.
Seadog Xxx Usb 3.0 & Usb-C Power Socket W/Volt Meter - 426518-1 - 354-4265181F1
USB 3.0 & USB-C Power Socket with Volt Meter charges two devices simultaneously while the LED screen displays voltage status. Total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. Protective dust cap extends the life of the charger. LED volt meter reads voltage up to 14.6 volts. Includes On/Off button to conserve battery power when not needed. Constructed of injection molded nylon. Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires. Also fits Sea-Dog® Power Socket Shell (426100). Output DC: 5V/6A. Input: 8-32 VDC. Blue LED display. IP65 rating. RoHS compliant.
Shock Cord 12" - 650120-1 - 354-6501201F1
These Elastic Shock Cords are great for securing bicycles, hand trucks, dinghies, or other odd-shaped items to your boat, trailer, or RV. Also handy for bundling items together, making them easier to carry or store. Constructed of natural rubber with a UV resistant polyethylene cover. Hooks are coated for corrosion and scratch resistance.
Shock Cord 18" - 650180-1 - 354-6501801F1
These Elastic Shock Cords are great for securing bicycles, hand trucks, dinghies, or other odd-shaped items to your boat, trailer, or RV. Also handy for bundling items together, making them easier to carry or store. Constructed of natural rubber with a UV resistant polyethylene cover. Hooks are coated for corrosion and scratch resistance.
Shock Cord Elastic 3/8" X 30" - 650300-1 - 354-6503001F1
These Elastic Shock Cords are great for securing bicycles, hand trucks, dinghies, or other odd-shaped items to your boat, trailer, or RV. Also handy for bundling items together, making them easier to carry or store. Constructed of natural rubber with a UV resistant polyethylene cover. Hooks are coated for corrosion and scratch resistance.
Shock Cord Elastic 3/8" X 36" - 650360-1 - 354-6503601F1
These Elastic Shock Cords are great for securing bicycles, hand trucks, dinghies, or other odd-shaped items to your boat, trailer, or RV. Also handy for bundling items together, making them easier to carry or store. Constructed of natural rubber with a UV resistant polyethylene cover. Hooks are coated for corrosion and scratch resistance.
Shock Cord Elastic 3/8" X 40" - 650400-1 - 354-6504001F1
These Elastic Shock Cords are great for securing bicycles, hand trucks, dinghies, or other odd-shaped items to your boat, trailer, or RV. Also handy for bundling items together, making them easier to carry or store. Constructed of natural rubber with a UV resistant polyethylene cover. Hooks are coated for corrosion and scratch resistance.
Side Mount Deck Hinge, 2-Hole Stainless. Each - 270250-1 - 354-2702501F1
Designed to mount vertically and attach an eye end in Bimini top applications. Installs with FH fasteners (not included).
Side Mount Deck Hinge, 2-Hole, Black, Pair - 273250-1 - 354-2732501F1
Designed to mount vertically and attach an eye end in Bimini top applications. Installs with FH fasteners (not included).
Side Mount Deck Hinge, 2-Hole, White, Pair - 273251-1 - 354-2732511F1
Designed to mount vertically and attach an eye end in Bimini top applications. Installs with FH fasteners (not included).
Side Mount Deck Hinge, 4-Hole Stainless. Each - 270255-1 - 354-2702551F1
Designed to mount vertically and attach an eye end in Bimini top applications. Installs with FH fasteners (not included).
Side Mount Deck Hinge, 4-Hole, Black, Pair - 273255-1 - 354-2732551F1
Designed to mount vertically and attach an eye end in Bimini top applications. Installs with FH fasteners (not included).
Side Mount Deck Hinge, 4-Hole, White, Pair - 273256-1 - 354-2732561F1
Designed to mount vertically and attach an eye end in Bimini top applications. Installs with FH fasteners (not included).
Side Mount/Slide Black 2/Cd - 273260-1 - 354-2732601F1
Track Mount Hinge Fittings provide slide adjustment for the convenient use and storage of Bimini top frames. Designed to attach an eye end. Use Side Mount Sliders for vertical mounting. Functions as an alternative to a brace kit. UV stabilized injection molded nylon construction. 1/4" pin size. For use in 0.850 or 1.050 track.
Side Mount/Slide Black 2/Cd - 273265-1 - 354-2732651F1
Track Mount Hinge Fittings provide slide adjustment for the convenient use and storage of Bimini top frames. Designed to attach an eye end. Use Side Mount Sliders for vertical mounting. Functions as an alternative to a brace kit. UV stabilized injection molded nylon construction. 1/4" pin size. For use in 0.850 or 1.050 track.
Side Mount/Slide White 2/Cd - 273261-1 - 354-2732611F1
Track Mount Hinge Fittings provide slide adjustment for the convenient use and storage of Bimini top frames. Designed to attach an eye end. Use Side Mount Sliders for vertical mounting. Functions as an alternative to a brace kit. UV stabilized injection molded nylon construction. 1/4" pin size. For use in 0.850 or 1.050 track.
Side Vent Adjuster Kit - 324380-1 - 354-3243801F1
Molded nylon. Carded. Includes stainless steel pin.
Single Coat Hook - Stainless - 671491-1 - 354-6714911F1
Single Coat Hook installs with two #8 FH fasteners (not included). Constructed of corrosion resistant cast 316 stainless steel.
Single Wing Latch Ea - 324140-1 - 354-3241401F1
Constructed of UV resistant black injection molded nylon. These Windshield Latches are used to secure windshield doors with a simple twist design. Prevents rattling due to engine vibration at high speeds.
Single Wing Latch Pr - 324110-1 - 354-3241101F1
Constructed of UV resistant black injection molded nylon. These Windshield Latches are used to secure windshield doors with a simple twist design. Prevents rattling due to engine vibration at high speeds.
Single/Dual Expanding Drink Holder W/Suction Cups - 588510-1 - 354-5885101F1
Single/Dual Drink Holder with suction cups expands from single to dual holders conserving space when not in use. Suction cups offer a flexible solution, mounting easily to most surfaces. Accommodates drink containers up to 3-1/2" in diameter. Impact resistant injection molded nylon construction.
Skene Chocks - Nylon - 067360-1 - 354-0673601F1
Skene bow chocks provide a smooth lead for your mooring or dock lines minimizing chafe. The tips of these chocks are designed to overlap preventing the motion of the boat from causing the line to accidentally work free of the chock. Left and right skene chocks included. Constructed of injection molded nylon they are UV stabilized and corrosion resistant. Accommodates lines up to 1/2". Installs with two #10 FH fasteners (not included).
Slide Lock .85 Track Black 2/Cd - 273295-1 - 354-2732951F1
Provides slide adjustment for the convenient use and storage of Bimini top frames. Track Slide Locks create a termination point. UV stabilized injection molded nylon construction. For use in 0.850 track.
Slide Lock .85 Track White 2/Cd - 273296-1 - 354-2732961F1
Provides slide adjustment for the convenient use and storage of Bimini top frames. Track Slide Locks create a termination point. UV stabilized injection molded nylon construction. For use in 0.850 track.
Sm Deck Hinge Black 2/Cd - 273205-1 - 354-2732051F1
Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Constructed of UV stabilized injection molded nylon. All Top Mount Hinge Fittings install with two #10 FH fasteners (not included). 3/16" pin size.
Sm Deck Hinge White 2/Cd - 273206-1 - 354-2732061F1
Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Constructed of UV stabilized injection molded nylon. All Top Mount Hinge Fittings install with two #10 FH fasteners (not included). 3/16" pin size.
Snap #1 Brass Swivel Eye, Carded - 139131-1 - 354-1391311F1
This swivel eye boat snap features a spring-loaded latch for easy attachment. Constructed of sand cast brass for corrosion resistance and durability they are designed for medium duty lifting and rigging applications. 360° swivel eye eliminates tangling. Polished finish makes them both functional and decorative.
Snap #3 Brass Swivel Eye, Carded - 139133-1 - 354-1391331F1
This swivel eye boat snap features a spring-loaded latch for easy attachment. Constructed of sand cast brass for corrosion resistance and durability they are designed for medium duty lifting and rigging applications. 360° swivel eye eliminates tangling. Polished finish makes them both functional and decorative.
Snap Hook - 151625-1 - 354-1516251F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multifunctional they can be used for lifting, rigging and anchoring applications. Integral eye insert provides a secure attachment for use on harnesses, fishing lines, and mooring buoys.
Snap Hook-Ss W/Eye 1/4 X 2-3/8 - 151565-1 - 354-1515651F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multifunctional they can be used for lifting, rigging and anchoring applications. Integral eye insert provides a secure attachment for use on harnesses, fishing lines, and mooring buoys.
Snap Hook-Ss W/Eye 3/8" X 4" - 151605-1 - 354-1516051F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multifunctional they can be used for lifting, rigging and anchoring applications. Integral eye insert provides a secure attachment for use on harnesses, fishing lines, and mooring buoys.
Snap Hook-Ss W/Eye 5/16X 3-1/4 - 151585-1 - 354-1515851F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multifunctional they can be used for lifting, rigging and anchoring applications. Integral eye insert provides a secure attachment for use on harnesses, fishing lines, and mooring buoys.
Splash Garde Horn Button - 420426-1 - 354-4204261F1
This universal momentary Splash Guard Push Button On-Off Switch can be panel mounted in a 5/8" diameter hole and is wired with two screw terminals. Stamped brass construction to withstand harsh marine conditions. PVC coating protects terminals and switch from water. Not designed for immersion. Can be used with Sea-Dog® Black Cap (420424) and highly visible Red Cap (420425). Maximum panel thickness: 3/4". 15A @ 12VDC.
Splash Garde On-Off Switch - 420396-1 - 354-4203961F1
Splash Guard On-Off Push-Pull Switch is constructed of stamped brass with PVC coating to protect terminals and switch from water (not designed for immersion). Features positive actuation with two positions On-Off (normally Off). Maximum panel thickness: 7/8. 15A @ 12VDC. 3/8" x 15/16" Shaft.
Spring Hook - Plated Steel - 155630-1 - 354-1556301F1
These hooks feature a spring-loaded closure for quick and easy connection. Constructed of electro-galvanized formed mild steel for both galvanic and corrosion protection.
Spring Loaded Flush Hatch Handle - 221820-1 - 354-2218201F1
Stamped 304 stainless steel. Carded.
Spring Snap - Stainless - 139896-1 - 354-1398961F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. These spring snaps can be used for tie-downs, lifting wires or in other light duty rigging applications. Ideal for use with 1" webbing.
Ss Anchor Swivel, 1/4" - 5/16", Bulk - 182608 - 354-182608F1
Investment cast AISI 316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.
Ss Boat Hook Clips, 1" - 1-1/4", Pr. - 491136-1 - 354-4911361F1
Boat Hook Clips fit boat hooks from 1" - 1-1/4" in diameter. Corrosion resistant stamped 304 stainless steel construction. Installs with two #8 RH fasteners (not included).
