Shrinkwrap Accessories
White Shrink Tape, 3" X 60 Yds. - 1765P - 315-Dt3Bf1
Not recommended for adhesion to hull. Serrated edges for easy tearing.
Strap Tensioner - Ds-15 - 315-14990F1
For use with strapping and buckles.Color may vary.
Shrinkfast 998 Propane Heat - Dsshfast998 - 315-Dsshfast998 Superseded By: 792-19998Af1
Shrink Tape, 6" X 60 Yds., White - 1926P - 315-T6Wf1
Not recommended for adhesion to hull. Serrated edges for easy tearing.
Shrink Tape, 6" X 60 Yds., Clear - T6C - 315-T6Cf1
Not recommended for adhesion to hull. Serrated edges for easy tearing.
Shrink Tape, 6" X 60 Yds., Blue - 1760P - 315-T6Bf1
Not recommended for adhesion to hull. Serrated edges for easy tearing.
Shrink Tape, 4" X 60 Yds., White - 1927P - 315-Dt4Wf1
Not recommended for adhesion to hull. Serrated edges for easy tearing.
Shrink Tape, 4" X 60 Yds., Clear - Dt4C - 315-Dt4Cf1
Not recommended for adhesion to hull. Serrated edges for easy tearing.
Shrink Tape, 4" X 60 Yds., Blue - 1763P - 315-Dt4Bf1
Not recommended for adhesion to hull. Serrated edges for easy tearing.
Shrink Tape, 3" X 60 Yds., White - 1828P - 315-Dt3Wf1
Not recommended for adhesion to hull. Serrated edges for easy tearing.
Shrink Tape, 2" X 60 Yds., White - 1961P - 315-Dt2Wf1
Not recommended for adhesion to hull. Serrated edges for easy tearing.
Shrink Tape, 2" X 60 Yds., Clear - Dt2C - 315-Dt2Cf1
Not recommended for adhesion to hull. Serrated edges for easy tearing.
Shrink Tape, 2" X 60 Yds., Blue - 1762P - 315-Dt2Bf1
Not recommended for adhesion to hull. Serrated edges for easy tearing.
Self Adhesive Vent 4" X 5", White - Ds-683W - 315-683Wf1
Used to create a waterproof vent in a shrink wrap cover, allowing airflow under the cover, reducing moisture buildup without compromising the covers integrity. Removable top for easy installation. Scalloped edges with raised walls allow for vertical or horizontal installation. Self adhesive. Weather tight vent. Removable top for easy installation. Vents should be applied to warm shrunk film to stick properly.
Self Adhesive Vent 4" X 5", Black - Ds-683 - 315-Ds683F1
Used to create a waterproof vent in a shrink wrap cover, allowing airflow under the cover, reducing moisture buildup without compromising the covers integrity. Removable top for easy installation. Scalloped edges with raised walls allow for vertical or horizontal installation. Self adhesive. Weather tight vent. Removable top for easy installation. Vents should be applied to warm shrunk film to stick properly.
Self Adhesive Vent 4 X5 - Ds-683Wpw - 315-Ds683Wpwf1
Wind powered self-adhesive, weather tight vent. Removable top for easy installation. It moves air under the shrink wrap cover with even the slightest breeze and can circulate air 24 hours per day. The cups can be rotated to either deliver air or remove it, maximizing air flow under the cover and eliminating moisture buildup.
Self Adhesive Filter Vent 4" X 5", Black - Ds-683F - 315-Ds683Ff1
The DS683F Weather-Tight Filter Vent uses a filter pad inside the vent top to keep dust, bugs, dirt and other debris out of shrink wrapped products. Identical to the standard DS-683 vent, the DS-683F Filter Vent is easy to install, inexpensive, versatile, has a replaceable filter, and works in any climate. Weather tight, self adhesive vent. Removable top for easy installation. Pre-installed filter included. Vents should be applied to warm shrunk film to stick properly.
Seatsaver Shrinkwrap Protection - Ds-Seatsaver - 315-Dsseatsaverf1
The SeatSaver is an all new revolutionary product that is ideal for any pontoon boat with seat backs that are exposed above the upper rail which come in contact with strapping and shrink wrap material. This will give even the novice shrink wrapper the peace of mind knowing their vinyl is protected from abrasion and heat during the shrinking process. Fits on all 1.25" square tubing top rails on pontoon boatsProvides either a 2" or 4" lift of the strapping over the vinyl seat backs. This product is reversible with strapping receivers at both ends of the productPrevents damage to seat backs from strapping abrasion and heat damage by lifting shrink wrap off the seat backs during the shrinking processReusable and durable design, so you can use year after year
Propane Heat Tool, 100,000 Btu - Ds-Rs100 - 315-Dsrs100F1
This 100,000 BTU propane fired heat tool is lightweight, economical, and good for do-it-yourselfers. Great as a secondary heat tool or backup. Complete kit includes: Heat gun, 25' hose, regulator, carry case, safety glasses, gloves, and training DVD.
P4W White Preservation Tape 4" X 36 Yds., 12/Case - P4W - 315-P4Wf1
Contains UV inhibitors for long term storage. Will not leave residue if applied to fiberglass, paint etc.
P4B Blue Preservation Tape 4" X 36 Yds., 12/Case - P4B - 315-P4Bf1
Contains UV inhibitors for long term storage. Will not leave residue if applied to fiberglass, paint etc.
P3W White Preservation Tape 3" X 36 Yds., 16/Case - P3W - 315-P3Wf1
Contains UV inhibitors for long term storage. Will not leave residue if applied to fiberglass, paint etc.
P3B Blue Preservation Tape 3" X 36 Yds., 16/Case - P3B - 315-P3Bf1
Contains UV inhibitors for long term storage. Will not leave residue if applied to fiberglass, paint etc.
P2W White Preservation Tape 2" X 36 Yds., 24/Case - P2W - 315-P2Wf1
Contains UV inhibitors for long term storage. Will not leave residue if applied to fiberglass, paint etc.
P2B Blue Preservation Tape 2" X 36 Yds., 24/Case - P2B - 315-P2Bf1
Contains UV inhibitors for long term storage. Will not leave residue if applied to fiberglass, paint etc.
Louver Vent, White - Blv1 - 315-Blv1F1
Simple installation.. just "press" it on. Special "high-tack" pressure sensitive adhesive liner - no special tools required. Guaranteed to stick to plastic, painted or metal surfaces. Strong bonding in all weather/wind conditions. Durable, all plastic construction (UV stabilized). Can be installed onto areas where water may "pond" (up to 1/3" deep) and maintain its water-tight seal.
Long Cuff Leather Safety Gloves - Ds-009 - 315-Ds009F1
Long cuff safety gloves designed to be used with heat tools. Long cuff protects wrists and clothing. Non-flammable, safe to use with open flame of heat tool.
Lift Off - Ds-Liftoff - 315-Liftofff1
Used to separate shrink wrap from the product it is covering. Using strapping, buckles and a tensioning tool the Liftoff offers simple protection. This separation promotes air circulation and is extremely important on painted hulls where shrink wrap touching paint can cause blistering. It is easily installed and re-usable.
End Caps-For Shrinkwrap Poles - Ds-Cap - 315-Dscapf1
For support poles. High density polythylene protective pad, designed to fit 2" x 4" boards to eliminate pole poke through.
Dssupercap Super Cap - Ds-Supercap - 315-Dssupercapf1
The Super Cap is designed to transfer the weight of snow, ice, and rain from the top of 2" x 4" support poles used under shrink wrap storage covers. Dome shaped and 20" in diameter, the Super Cap rests on the woven cord strapping running both lengthwise and crosswise, thus minimizing support poles from poking through shrink wrap covers. Super Caps can be easily attached to wooden uprights with either a nail or staples.
Dsstrapdisp Strapping Dispenser Only - Ds-Strapdisp - 315-Dsstrapdispf1
Sleek, durable, and lightweight design. Compatible with 1/2" and 3/4" strapping rolls. Convenient carrying handle for mobile shrink wrappers.Strap sold separately.
Dsshfast9986 6' Extension For 998 Gun - Ds-Shfast998-6 - 315-Dsshfast9986F1
6' Extension for 998 Gun
Dsprotector Strap Protector - Ds-Protector - 315-Dsprotectorf1
The Protector is designed for two different applications. A method of keeping strapping from forming dents in vinyl upholstery on boats. Used as corner guards to keep shrink wrap and strapping from being cut on sharp edges. Notched on all four sides for easy attachment to strapping. Strapping is kept from pressing on vinyl marine upholstery which can leave permanent depressions in the material.
Ds72W Access Door 36" X 72", White - Ds72W - 315-Ds72Wf1
Features zipper closure.
Ds72 Access Door 36" X 72", Clear - Ds72 - 315-Ds72F1
Features zipper closure.
Ds48W Access Door 36" X 48", White - Ds48W - 315-Ds48Wf1
Features zipper closure.
Ds48B Access Door 36" X 48", Blue - Ds48B - 315-Ds48Bf1
Features zipper closure.
Ds48 Access Door 36" X 48", Clear - Ds48 - 315-Ds48F1
Features zipper closure.
Ds36W Access Door 30" X 36", White - Ds36W - 315-Ds36Wf1
Features zipper closure.
Ds36B Access Door 30" X 36", Blue - Ds36B - 315-Ds36Bf1
Features zipper closure.
Ds36 Access Door 30" X 36", Clear - Ds36 - 315-Ds36F1
Features zipper closure.
Ds007 Professional Film Cutting Knife - Ds-007 - 315-Ds007F1
Hooked ends for safe cutting.Color may vary.
Bsv1 Stick-On Vent - Bsv-1 - 315-Bsv1F1
Simple "Stick-On" installation. No special tools required.
Bsp1 Stealth Vent Push-In - Bsp-1 - 315-Bsp1F1
Automatically cuts its own "ventilation" hole during installation, secures itself to the flexible cover material, seals itself preventing rain/snow entry and shelters the vent opening to prevent bug/element entry.
Bottom Cap - Ds-Bcap - 315-Dsbcapf1
For support poles. High density polythylene protective pad, designed to fit 2" x 4" boards to eliminate pole poke through. The Bottom Cap is smaller and more skid proof with flexible plastic - this upgraded material offers less scratching and better stability by reducing movement of the support post.
6 X 600' Anti-Chafe Tape - 1515P-Bw6-600 - 315-Bw6600F1
A high performance polyethylene film with a "light tack" adhesive providing a tough, puncture resistant barrier preventing scratching or chafing. This tape is designed to leave no residue while providing a UV protected surface between the shrink wrap and the covered object. APPLICATIONS: Anti chafe tape is applied to surfaces under the shrink wrap. It is not a heat shrinkable product.
3/4" Metal Buckles (100/Bag) - Pacb634 - 315-Pacb634F1
For use with strapping and tensioning tool.
3/4 X 2100' Strap-Cross Woven - 15087 - 315-15087F1
Used with uprights and buckles to form the support structure under shrinkwrap covers.
3/4 X 1000' Strap-Cross Woven - 15089 - 315-15089F1
Used with uprights and buckles to form the support structure under shrinkwrap covers.
24 X 600' Anti-Chafe Tape - 1515P-Bw24-600 - 315-Bw24600F1
A high performance polyethylene film with a "light tack" adhesive providing a tough, puncture resistant barrier preventing scratching or chafing. This tape is designed to leave no residue while providing a UV protected surface between the shrink wrap and the covered object. APPLICATIONS: Anti chafe tape is applied to surfaces under the shrink wrap. It is not a heat shrinkable product.
14976 Disposable Film Cutting Knife - Ds-007D - 315-14976F1
Hooked ends for safe cutting. Color may vary.
12 X 600' Anti-Chafe Tape - 1515P-Bw12-600 - 315-Bw12600F1
A high performance polyethylene film with a "light tack" adhesive providing a tough, puncture resistant barrier preventing scratching or chafing. This tape is designed to leave no residue while providing a UV protected surface between the shrink wrap and the covered object. APPLICATIONS: Anti chafe tape is applied to surfaces under the shrink wrap. It is not a heat shrinkable product.
1/2" Metal Buckles (100/Bag) - Pacb412 - 315-Pacb412F1
For use with strapping and tensioning tool.
1/2 X 3900' Strap Cross Woven - Pd50Tcw - 315-Pd50Tcwf1
Used with uprights and buckles to form the support structure under shrinkwrap covers.
1/2 X 1500' Strap-Cross Woven - Pd40Tcw - 315-Pd40Tcwf1
Used with uprights and buckles to form the support structure under shrinkwrap covers.
