Tiedown Engineering
Tiedown 86515 Swingking™ Bolt-On Swing Tongue Kit, Black Powder Coated, 3" X 5" - 86515 - 241-86515F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86514 Swingking™ Bolt-On Swing Tongue Kit, Hot Dipped Galvanized, 3" X 5" - 86514 - 241-86514F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86513 Swingking™ Bolt-On Swing Tongue Kit, Black Powder Coated, 3" X 4" - 86513 - 241-86513F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86512 Swingking™ Bolt-On Swing Tongue Kit, Hot Dipped Galvanized, 3" X 4" - 86512 - 241-86512F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86511 Swingking™ Bolt-On Swing Tongue Kit, Black Powder Coated, 3" X 3" - 86511 - 241-86511F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86510 Swingking™ Bolt-On Swing Tongue Kit, Hot Dipped Galvanized, 3" X 3" - 86510 - 241-86510F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86231 - 241-86231F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86230 - 241-86230F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86229 - 241-86229F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86215 - 241-86215F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86214 - 241-86214F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86211 - 241-86211F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86210 - 241-86210F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86209 - 241-86209F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86208 - 241-86208F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86207 - 241-86207F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86206 - 241-86206F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86205 - 241-86205F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86204 - 241-86204F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86033 - 241-86033F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86032 - 241-86032F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86031 - 241-86031F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86030 - 241-86030F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86029 - 241-86029F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86028 - 241-86028F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86027 - 241-86027F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86026 - 241-86026F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86024 - 241-86024F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal N Zinc - 86025 - 241-86025F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft - 86041 - 241-86041F1
Zinc plated steel.
Tie Down Engineering Zinc Plated Roller Shaft - 86039 - 241-86039F1
Zinc plated steel.
Tie Down Engineering Zinc Plated Roller Shaft - 86038 - 241-86038F1
Zinc plated steel.
Tie Down Engineering Zinc Plated Roller Shaft - 86037 - 241-86037F1
Zinc plated steel.
Tie Down Engineering Zinc Plated Quick Link - 50649 - 241-50649F1
Ideal for use with trailer chains. Zinc plated.
Tie Down Engineering Zinc Plated Quick Link - 50648 - 241-50648F1
Ideal for use with trailer chains. Zinc plated.
Tie Down Engineering Wobble Roller Retainer With Washer - Packed Set For 1 Roller - 86252 - 241-86252F1
Replacement washers and clip rings for "wobble" roller bunk wheels. Set for one roller.
Tie Down Engineering Winch Strap With Heavy Duty Forged Latch Hook - 50475 - 241-50475F1
Easy to install and no more tangling in the drum. Each strap comes with a heavy-duty forged latch hook.
Tie Down Engineering Winch Strap With Heavy Duty Forged Latch Hook - 50470 - 241-50470F1
Easy to install and no more tangling in the drum. Each strap comes with a heavy-duty forged latch hook.
Tie Down Engineering Winch Strap With Heavy Duty Forged Latch Hook - 50465 - 241-50465F1
Easy to install and no more tangling in the drum. Each strap comes with a heavy-duty forged latch hook.
Tie Down Engineering Tire Carrier - 86101 - 241-86101F1
Accommodates 4 and 5 lug wheels. Hot dip galvanized for lasting protection. Fits all trailer frames up to 3" wide by 4" high. Heavy-duty steel tubing.
Tie Down Engineering Tire Carrier - 86099 - 241-86099F1
Adjusts to fit 4 and 5 lug wheels up to 15". Fits all trailer frames up to 3" wide by 4" high. Extra heavy duty welded steel construction.
Tie Down Engineering Tire Carrier - 86098 - 241-86098F1
Adjusts to fit 4 and 5 lug wheels up to 15". Fits all trailer frames up to 3" wide by 4" high. Extra heavy duty welded steel construction.
Tie Down Engineering Tire Carrier - 86092 - 241-86092F1
7/16" U-bolt design, accommodating 4 and 5 lug wheels. Fits 8" to 14" tires and most 15". Overall length 8-3/4" with a 3"thread length. Zinc plated. Fits all trailer frames up to 3".
Tie Down Engineering Tire Carrier - 86091 - 241-86091F1
7/16" U-bolt design, accommodating 4 and 5 lug wheels. Fits 8" to 14" tires and most 15". Overall length 8-3/4" with a 3"thread length. Zinc plated. Fits all trailer frames up to 3".
Tie Down Engineering Tire Carrier - 86079 - 241-86079F1
Made from heavy-duty steel. Carrier mounts both spare hub & spare tire designed for UHI 1750# hub with 1-1/16" and 1-3/8" bearings. Fits all trailer frames up to 3" wide and 4" high. Security holes for optional cable & lock. Includes 5 stud pre-greased hub with bearings.
Tie Down Engineering Tire Carrier - 86069 - 241-86069F1
Adjustable bolt circle fits both 4 lug and 5 lug wheels. Fits all trailer frames up to 6" high. Heavy duty welded steel construction.
Tie Down Engineering Tire Carrier - 86060 - 241-86060F1
Designed for use with large tube, I-beam and aluminum trailers. Heavy duty steel carrier mounts larger spare tires. Fits frames from 5" to 8" in height. Bolts can be positioned to accommodate 4, 5, 6 and 8 lug wheels.
Tie Down Engineering Super Hooker Anchor Kit Includes Anchor, Anchor Line, Chain And (2) Shackles - 95100 - 241-95100F1
The Super Hooker anchor is a good choice for your anchoring needs. This lightweight, hot dipped galvanized Super Hooker anchor has strong, wide flukes that penetrate quickly and firmly for maximum holding power. The fully welded crown configuration provides the right angles for ultimate holding power and secure penetration. The Super Hooker stows flat and can be used with most fluke type anchor storage systems. Includes Super Hooker anchor, rope, galvanized steel chain and shackles. 13 lb. Super Hooker for 25'-30' boats.
Tie Down Engineering Super Hooker Anchor Kit Includes Anchor, Anchor Line, Chain And (2) Shackles - 95095 - 241-95095F1
The Super Hooker anchor is a good choice for your anchoring needs. This lightweight, hot dipped galvanized Super Hooker anchor has strong, wide flukes that penetrate quickly and firmly for maximum holding power. The fully welded crown configuration provides the right angles for ultimate holding power and secure penetration. The Super Hooker stows flat and can be used with most fluke type anchor storage systems. Includes Super Hooker anchor, rope, galvanized steel chain and shackles. 8 lb. Super Hooker for 17'-24' boats.
Tie Down Engineering Super Hooker Anchor - 95055 - 241-95055F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #22 with 1300 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95050 - 241-95050F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #18 with 1050 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95045 - 241-95045F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #13 with 740 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95040 - 241-95040F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #8 with 480 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95035 - 241-95035F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #4 with 250 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95030 - 241-95030F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #2-1/2 with 130 Ibs. holding stregth.
Tie Down Engineering Speed Release For Dock Ladder - 27271 - 241-27271F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water. 250 lb. capacity.
Tie Down Engineering Safety Chain With S-Hooks On Both Ends - 81205 - 241-81205F1
Zinc plated trailer chains with S-hooks.
Tie Down Engineering Safety Chain With S-Hooks - Sold As Pair - 81204 - 241-81204F1
Zinc plated trailer chains with S-hooks.
Tie Down Engineering Safety Chain With S-Hooks - Sold As Pair - 81203 - 241-81203F1
Zinc plated trailer chains with S-hooks.
Tie Down Engineering Safety Chain With S-Hooks - Sold As Pair - 81202 - 241-81202F1
Zinc plated trailer chains with S-hooks.
Tie Down Engineering Rear Spring Hanger - 86275 - 241-86275F1
Solid steel hangers that can be used on rear slipper springs 1-3/4" to 2" wide. 5,200-8,000 lb. capacity for medium-duty axles. 1/4" Stock.
Tie Down Engineering Quik-Set Hooker Anchor Kit Includes Anchor, Anchor Line, Chain And (2) Shackles - 95090 - 241-95090F1
This innovative anchor replaces the Economy anchor line with a fresh design and increased performance. The Hooker Quik-Set has 50% more holding power and the appearance of an anchor costing much more. The Hooker Quik-Set design with the "Slip Lock" shank insures a proper set regardless of which way the anchor lands. A slip ring design permits easy retrieval in snag prone areas. Hot dipped galvanized finish. Includes Quick Set anchor, rope, galvanized chain and shackles. 5 lb. Hooker 10HQ Quik Set for 20'-24' boats.
Tie Down Engineering Quik-Set Hooker Anchor - 95026 - 241-95026F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish. Model 15HQ with 200 Ibs. holding strength.
Tie Down Engineering Quik-Set Hooker Anchor - 95021 - 241-95021F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish. Model 13 HQ with 180 Ibs. holding strength.
Tie Down Engineering Quik-Set Hooker Anchor - 95016 - 241-95016F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish. Model 10HQ with 160 Ibs. holding strength.
Tie Down Engineering Quik-Set Hooker Anchor - 95011 - 241-95011F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish.Model 7HQ with 150 Ibs. holding strength.
Tie Down Engineering Quik-Set Hooker Anchor - 95006 - 241-95006F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish. Model 5HQ with 120 lbs. holding strenth.
Tie Down Engineering Poly Vinyl Bunk Glide On Fits 2" X 4" Standard 8' Bunk Boards - 86162 - 241-86162F1
Self centering bunk glide on's made with Tie Down's enhanced PVC. Launch and load made easy. Ideal for painted, fiberglass, or aluminum boats. Slide on or off with less effort. Easy to install. Includes 2 left and 2 right self centering glide-ons with rounded end caps to fit two 2" x 4" x 8' bunk boards. Includes stainless screws.
Tie Down Engineering Pal Nuts - 4 Per Pack - 86310 - 241-86310F1
Zinc plated steel. Size: 5/8".
Tie Down Engineering Pal Nuts - 4 Per Pack - 86305 - 241-86305F1
Zinc plated steel. Size: 1/2".
Tie Down Engineering Modular Bunk Glide On'S - Black - 86295 - 241-86295F1
Self centering bunk glide on's with interlocking modular sections. Designed to fit various bunk board lengths. Ideal for painted, fiberglass, or aluminum boats. Fits 2" x 6" x 8' standard bunk boards. Kit includes 4 ea. - 3' sections, 4 ea. - 1' end sections and mounting hardware. Slide on or off with less effort. Easy to Install.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86290 - 241-86290F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 3" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86289 - 241-86289F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 3" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86288 - 241-86288F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 4" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86287 - 241-86287F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 4" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86285 - 241-86285F1
Feature new poly vinyl amber or black rollers that are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 3" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86284 - 241-86284F1
Poly vinyl amber rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 4" with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86283 - 241-86283F1
Poly vinyl amber rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size: 5" with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86199 - 241-86199F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. 12" Amber center guide roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86198 - 241-86198F1
Amber poly vinyl that is long lasting, will absorb shock, is cut resistant and will not mark or mar your boat. Size 3-1/2" with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86169 - 241-86169F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. 10" Amber center guide roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86159 - 241-86159F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. 8" Amber center guide roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86158 - 241-86158F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. 5" Amber center guide roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86144 - 241-86144F1
Poly vinyl amber rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat.Kit includes: (4) Ribbed rollers, 7/8" & 1.15" bushings and galvanized hog rings & washers. Size: 5" with 3" dia.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86143 - 241-86143F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size: 3" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86142 - 241-86142F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 4" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86421 - 241-86421F1
Poly vinyl. Will not mar or mark the boat. Size 4" with a 1/2" shaft.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86420 - 241-86420F1
Feature new poly vinyl amber or black rollers that are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size: 2" with 3/8" shaft.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86419 - 241-86419F1
Ribbed. Includes 7/8" and 1.15" bushings, hog ring and washers. Size: 5".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86413 - 241-86413F1
Poly vinyl. Will not mar or mark the boat. 3" Black roller with 1/2" shaft.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86412 - 241-86412F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. 3.5" End cap with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86411 - 241-86411F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. 12" Keel with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86410 - 241-86410F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. 10" Keel with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86409 - 241-86409F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. 8" Keel with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86408 - 241-86408F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. 5" Spool with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86407 - 241-86407F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. 5" Keel for 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86406 - 241-86406F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. 4" spool with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86405 - 241-86405F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Black. Size: 3".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86404 - 241-86404F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Black. Size 4".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86403 - 241-86403F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Black. Size: 3".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86402 - 241-86402F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Black. Size: 3".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86401 - 241-86401F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Black. Size: 4".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86400 - 241-86400F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Black bow roller is 4".
Tie Down Engineering Hull Sav'R Black Spool Rubber Roller. Size 4" With 1/2" Hole. - 86479 - 241-86479F1
Black Spool Rubber Roller. Size 4" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Side Guide Roller - 86477 - 241-86477F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Size: 12" x 2-1/2" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Side Guide Roller - 86475 - 241-86475F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Size 9" x 2" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86494 - 241-86494F1
Rubber Wobble Roller, 5" Ribbed with 1-1/4" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86493 - 241-86493F1
Rubber Wobble Roller, 4" Ribbed with 3/4" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86492 - 241-86492F1
Rubber Wobble Roller, 4" Smooth with 3/4" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86491 - 241-86491F1
Rubber "V" Bow Stop, 4" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86490 - 241-86490F1
Rubber "V" Bow Stop, 3" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86489 - 241-86489F1
Rubber "V" Bow Stop, 2" with 3/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86488 - 241-86488F1
4" Rubber Bow Rollers with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86487 - 241-86487F1
3" Rubber Bow Rollers with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86486 - 241-86486F1
12" Rubber Center Guide Keel Roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86485 - 241-86485F1
10" Rubber Center Guide Keel Roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86484 - 241-86484F1
8" Rubber Center Guide Keel Roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86483 - 241-86483F1
5" Black Rubber Center Guide Keel Roller with 5/8" Hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86482 - 241-86482F1
Black Spool Rubber Roller. Size 5" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86481 - 241-86481F1
Black Spool Rubber Roller. Size 5" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86480 - 241-86480F1
Black Spool Rubber Roller. Size 4" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber End Cap - 86478 - 241-86478F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Size: 2-1/2" x 1-1/2" x 5/8" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber End Cap - 86476 - 241-86476F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Size 2" x 2" x 1/2" with 1/2" hole.
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 86149 - 241-86149F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 81230 - 241-81230F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 81225 - 241-81225F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hot Dipped Galvanized Keel Roller Assembly With 4" Rubber Roller - 86121 - 241-86121F1
Adjustable offset brackets mount on tongue for keel support. Complete with 4" rubber roller (for 2" wide tongue).
Tie Down Engineering Hot Dip Galvanized Split Panel Brackets - Sold As Pair (L & R) - 81235 - 241-81235F1
Sold in pairs (right and left) to accommodate any size roller length. Slot allows vertical adjustment for stabilizing boat on trailer. Slots accept 7/16" or 1/2" bolts. Use 1/2" or 5/8" roller shaft.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86468 - 241-86468F1
When the trailer is submerged, the PVC guide rises upward adding an additional 12" in sight with adjustable viewing sight of 24"- 36" overall height. Bright orange end caps on these PVC guides give you a brighter target when loading your pontoon boat. The guide posts are designed to be mounted between the pontoons. Made of 1-1/2" square, 16-gauge steel galvanized tubing and covered by 2"x 20" PVC pipe. Guide posts extend fully into the PVC tube for additional strength. All mounting hardware included.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86467 - 241-86467F1
Ideal for larger pontoon boats. These guides are designed for rough water loading where high impact guides are required. The guide posts are hot dip galvanized for long life with covers made from high impact non-marking molded PVC. The guide posts are designed to be mounted between the pontoons. Made of 2-1/2" square, 13-gauge steel tubing. Mounts to trailer cross members up to 2" wide by 2" high. All mounting hardware included. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86466 - 241-86466F1
Ideal for jon boats, bass boats and personal watercraft. The guide posts are made of 1-1/2" square, 16-gauge steel tubing and galvanized for long life. Guide covers are made from high impact non-marking molded PVC. Low Rider Guide On's give you the extra advantage of high strength and great looks for your trailer. Mounts to trailer cross members 2"x 2", 2"x 3" and 2"x 4" frames. All mounting hardware included.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86465 - 241-86465F1
Bright orange end caps on these PVC guides gives a brighter target when loading a pontoon boat. The guide posts are designed to be mounted between the pontoons. Made of 1-1/2" square, 16-gauge steel tubing and covered by 2"x 20" PVC pipe. Galvanized guide posts extend fully into the PVC tube for additional strength. Mounts to trailer cross members up to 2" wide by 2" high. All mounting hardware included.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86441 - 241-86441F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86440 - 241-86440F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86201 - 241-86201F1
Hull Sav'r boat guides are designed to absorb impact of the hull and protect the trailer's finish. Poly vinyl protector pads eliminate metal to metal contact and prevents rust. All hardware included. Universal fit for 3 & 4" trailer frame sizes, channel or tube. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86200 - 241-86200F1
Hull Sav'r boat guides are designed to absorb impact of the hull and protect the trailer's finish. Poly vinyl protector pads eliminate metal to metal contact and prevents rust. All hardware included. Universal fit for 3 & 4" trailer frame sizes, channel or tube. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86148 - 241-86148F1
Soft poly vinyl cradles your boat protecting it from scratches and dings. All hardware included. Universal fit for 3" and 4" trailer frame sizes. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86119 - 241-86119F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86106 - 241-86106F1
Roller angle adjusts to angle of hull; 16" of adjustment (8" each side). Hot dip galvanized steel. One piece adjustable clamp with U-bolt. Fits all channel and tube frames up to 5". Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86105 - 241-86105F1
Adapts to all tube and channel trailer frames. Hot dip galvanized for lasting protection. Heavy duty steel component parts. Heavy duty 4' x 2-3/8" PVC guide tubes, 16" of adjustment. All hardware included. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86104 - 241-86104F1
Hull Sav'r boat guides are designed to absorb impact of the hull and protect the trailer's finish. Poly vinyl protector pads eliminate metal to metal contact and prevents rust. Shock dampener and wedge dampener can be configured for 0, 7 or 14 degree hull angles. All hardware included. Universal fit for 3" & 4" trailer frame size. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86103 - 241-86103F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86102 - 241-86102F1
Mount these 13" rubber rollers on top or beneath frame for added adjustment. Hot dip galvanized mounts adjust for widths to 13" on each side. Fits frame up to 4". Hardware included. Sold in pairs.
Tie Down Engineering Galvanized U-Bolt Kit - 86227 - 241-86227F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86226 - 241-86226F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86225 - 241-86225F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86224 - 241-86224F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86223 - 241-86223F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86222 - 241-86222F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86221 - 241-86221F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86220 - 241-86220F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86433 - 241-86433F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8" with 12" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86432 - 241-86432F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8" with 10" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86431 - 241-86431F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 8-3/8" with 8" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86430 - 241-86430F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8" with 5" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86417 - 241-86417F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8" with 12" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86416 - 241-86416F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8" with 10" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86415 - 241-86415F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 8-3/8" with 8" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86414 - 241-86414F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8" with 5" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86282 - 241-86282F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8". Roller size is 12".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86281 - 241-86281F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8". Roller size is 10".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86280 - 241-86280F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket is 8-3/8". Roller size is 8".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86279 - 241-86279F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8". Roller size 5".
Tie Down Engineering Galvanized Steel Panel Bracket - 86155 - 241-86155F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 10-3/8" W. Roller size is 10".
Tie Down Engineering Galvanized Steel Panel Bracket - 86153 - 241-86153F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 12-3/8" W. Roller size is 12".
Tie Down Engineering Galvanized Steel Panel Bracket - 86152 - 241-86152F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". BRacket is 8-3/8" W. Roller size is 6".
Tie Down Engineering Galvanized Steel Panel Bracket - 86151 - 241-86151F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 5-3/8" W. Roller size is 5".
Tie Down Engineering Galvanized Steel Panel Bracket - 86150 - 241-86150F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 4-3/8" W. Roller size is 4".
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59400 - 241-59400F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59395 - 241-59395F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59390 - 241-59390F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59385 - 241-59385F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59380 - 241-59380F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59379 - 241-59379F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86189 - 241-86189F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86188 - 241-86188F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86187 - 241-86187F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86186 - 241-86186F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86185 - 241-86185F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86184 - 241-86184F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Bunk - Sold As Pair - 86157 - 241-86157F1
Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.
Tie Down Engineering Galvanized Roller Bunk - Sold As Pair - 86145 - 241-86145F1
Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.
Tie Down Engineering Galvanized Roller Bunk - Sold As Pair - 86118 - 241-86118F1
Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.
Tie Down Engineering Galvanized Roller Bunk - Sold As Pair - 86117 - 241-86117F1
Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.
Tie Down Engineering Galvanized Dock Ladder - 28275 - 241-28275F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Dock Ladder - 28274 - 241-28274F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Dock Ladder - 28273 - 241-28273F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Front Spring Hanger - 86274 - 241-86274F1
Solid steel hangers that can be used on slipper and double eye springs that are mounted on 1,000-3,500 lb. capacity, medium-duty axles. Pre-drilled for 9/16" bolt.
Tie Down Engineering Fluted Zinc Plated Shackle Bolts With Nuts For Use With Spring Hanger Brackets (2 Per Pack) - 86250 - 241-86250F1
For use with spring hanger brackets. Fluting prevents the bolt from turning, which can wear hanger brackets. Grade 5 steel. 9/16" x 3" bolts with nuts.
Tie Down Engineering Dock Side Slotted Receiver With Cross Beam - 86901 - 241-86901F1
The Slotted Style Receiver with the cross beam mounting bracket provides a secure mounting solution for solid side rail docks.The assembly mounts on the side rails of solid rail style docks and is secured to the side rails with two bolts on each side. Includes one slotted receiver with cross beam.
Tie Down Engineering Dock Side Mounting Base - Magma Grill Kettle - 86913 - 241-86913F1
This mounting bracket provides secure mounting support for Magma's Kettle grills. Requires 1 receiver.
Tie Down Engineering Dock Side Cross Beam Extension - 86934 - 241-86934F1
With the addition of the Cross Beam 28 Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide.
Tie Down Engineering Dock Side Cross Beam Extension - 86916 - 241-86916F1
With the addition of the Cross Beam 28 Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide.
Tie Down Engineering Dock Hardware - Washer Plate - 26409 - 241-26409F1
Commercial grade. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Washer Plate - 24284 - 241-24284F1
Standard grade. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Steel Chain Pile Holder, Commercial Grade - 26419 - 241-26419F1
For use as a pile holder with 3/8" galvanized chain and shackles. Can be adjusted for various pile diameters. Size: 20-1/4" x 4-1/4" x 4-1/4" x 1/4" Steel.
Tie Down Engineering Dock Hardware - Piling Hoop And Roller Assembly, Commercial Grade - 26415 - 241-26415F1
Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the Piling hoop (26412) and roller assembly (26414) to make up for the up and down movement. For pilings up to 12" in diameter.
Tie Down Engineering Dock Hardware - Outside Pipe Holder - 26411 - 241-26411F1
Commercial grade. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set required for attaching.
Tie Down Engineering Dock Hardware - Outside Pipe Holder - 24280 - 241-24280F1
Standard grade. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set required for attaching.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 26522 - 241-26522F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 26418 - 241-26418F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 25491 - 241-25491F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Corner/Female 10"L X 5"H - 26521 - 241-26521F1
Standard grade. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Female 10"L X 5"H - 26400 - 241-26400F1
Commercial grade. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner End - 26523 - 241-26523F1
Standard grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner End - 26428 - 241-26428F1
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 12-1/4"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner End - 26402 - 241-26402F1
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26532 - 241-26532F1
Standard Grade w/ 1/2" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5" x 5".
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26427 - 241-26427F1
Commercial Grade w/ 3/4" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5" x 5".
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26408 - 241-26408F1
Commercial grade w/ 1/2" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5"L x 5"H.
Tie Down Engineering Dock Hardware - Inside Corner Pipe Holder, Commercial Grade - 26405 - 241-26405F1
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for attaching. 2" Pipe.
Tie Down Engineering Dock Hardware - Inside Corner Pipe Holder, Commercial Grade - 26404 - 241-26404F1
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for attaching. 2" Pipe.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26524 - 241-26524F1
Standard grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26417 - 241-26417F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 3" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26403 - 241-26403F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2-1/4" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26401 - 241-26401F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ Square holes.
Tie Down Engineering Dock Hardware - Inside Corner 10-1/2"L X 5"H With 2-1/4" Elongated Holes And Larger Brace, Commercial Grade - 26424 - 241-26424F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 10-1/2"L x 5"H w/ 2-1/4" holes & larger brace.
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24292 - 241-24292F1
Commercial grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 5".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24289 - 241-24289F1
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24287 - 241-24287F1
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 2".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Heavy Duty Piling Hoop, Commercial Grade - 26412 - 241-26412F1
Commerical grade. Heavy duty piling hoop for pilings up to 12" in diameter. The hoop is constructed of 1-1/2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional deck plate.
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Carriage Bolt Set (8 Per Bag) - 26535 - 241-26535F1
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Carriage Bolt Set (8 Per Bag) - 26534 - 241-26534F1
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
Tie Down Engineering Dock Hardware - Heavy Duty Hot Dipped Galvanized 6" Roller Assembly, Commercial Grade - 26414 - 241-26414F1
Commercial heavy duty roller assembly. Bracket and roller bolt directly to the deck plate (26416). An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/8" diameter shaft. 3/4" bracket is hot-dipped galvanized. Size: 10-1/2" x 2".
Tie Down Engineering Dock Hardware - Heavy Duty 4" X 6" Deck Plate, Commercial Grade - 26416 - 241-26416F1
Heavy duty deck plate for use with Piling Hoop. This 3/16" thick 4"x 6" x 22" plate can be bolted from the top and side of the dock. The hoop can then be bolted to the deck plate, allowing it to be removed seasonally.
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26429 - 241-26429F1
Commercial Grade w/4" radius for 8" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 14" x 3".
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26394 - 241-26394F1
Commercial Grade w/6" radius for12 Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 18" x 3".
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26393 - 241-26393F1
Commercial Grade w/7" radius for 14" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 20" x 3".
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26391 - 241-26391F1
Commercial Grade w/5" radius for 10" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 16" x 3".
Tie Down Engineering Dock Hardware - Galvanized Inside Rolling Ramp Bracket Includes Left And Right Ramp Brackets, Commercial Grade - 26431 - 241-26431F1
5" x 11" x 1/4" galvanized steel bracketIncludes left and right ramp brackets
Tie Down Engineering Dock Hardware - Galvanized Hex Head Bolt Set 3/4" X 3-1/2" (8 Per Bag) - 24279 - 241-24279F1
Standard grade. Includes lock nut. Used to connect male and female connectors. Galvanized 3/4" x 3-1/2".
Tie Down Engineering Dock Hardware - Galvanized Connector Pin Set 3/4" - 26531 - 241-26531F1
Standard grade. Used for quick disconnect of male and female connectors. Galvanized 3/4" connector pin and hitch clip pin.
Tie Down Engineering Dock Hardware - Female T Connector 5"L X 5"H - 26528 - 241-26528F1
Standard Grade w/ 1/2" tabs. Two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x 5"H.
Tie Down Engineering Dock Hardware - Female T Connector 5"L X 5"H - 26407 - 241-26407F1
Commercial grade w/ 1/2" tabs. Two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x 5"H.
Tie Down Engineering Dock Hardware - Chain Retainer, Commercial Grade - 26410 - 241-26410F1
Commercial grade. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H.
Tie Down Engineering Dock Hardware - Backing Plate/Hurricane Strap, Standard Grade - 26369 - 241-26369F1
Standard grade for use with Piling Hoops. Size: 2" x 18" x 7 ga.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26527 - 241-26527F1
Standard grade. Should be used for all cross supports. Each leg 2-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26422 - 241-26422F1
Commercial grade. Should be used for all cross supports. Each leg 2-3/4"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26406 - 241-26406F1
Commercial grade. Should be used for all cross supports. Each leg 2-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26399 - 241-26399F1
Commercial grade. Should be used for all cross supports. Each leg 2-1/2"L x 2-1/2"H".
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26398 - 241-26398F1
Commercial grade. Should be used for all cross supports. Each leg 3"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26397 - 241-26397F1
Commercial Grade. Should be used for all cross supports. Each leg 4"L x 8"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26392 - 241-26392F1
Commerical grade. Should be used for all cross supports. Each leg 2-3/4"L x 2-1/2"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26380 - 241-26380F1
Commercial grade. Should be used for all cross supports. Each leg 4"L x 7"H".
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26379 - 241-26379F1
Commercial grade. Should be used for all cross supports. Each leg 10"L x 3"H", 3 holes.
Tie Down Engineering Dock Hardware - 5" X 5" Back Up Plate, Commercial Grade - 26413 - 241-26413F1
Reinforcing plates are used to back up single T males and females. 5" x 5".
Tie Down Engineering Dock Hardware - 14" Steel Hoop Roller Pile Holder, Commercial Grade - 26423 - 241-26423F1
14" Commercial grade steel. The piling hoop secures around the piling, while roller permits smooth up and down movement.
Tie Down Engineering Dock Hardware - 14" Internal Pile Holder, Commercial Grade - 26434 - 241-26434F1
Commercial grade. Heavy duty 1/4" galvanized steel. Bolts to the dock directly. 4 Rollers allow it to move smoothly up and down the piling. Size: 24" x 24" x 7-15/16".
Tie Down Engineering Deluxe Anchor Kit Includes Anchor, Anchor Line, Chain And Shackles - 95096 - 241-95096F1
This anchor has the traditional holding power which has always been associated with Danforth® Standard® Anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long-lasting protection. Includes Danforth anchor, rope, stainless steel chain and shackles. Model S600 with 8 lb. Danforth® anchor for 17'-24' boats.
Tie Down Engineering Danforth Standard Anchor - 94016 - 241-94016F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 40S for 45' boat size.
Tie Down Engineering Danforth Standard Anchor - 94015 - 241-94015F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 22S for 40' boat size.
Tie Down Engineering Danforth Standard Anchor - 94014 - 241-94014F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 18S for 36' boat size.
Tie Down Engineering Danforth Standard Anchor - 94013 - 241-94013F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 13S for 31' boat size.
Tie Down Engineering Danforth Standard Anchor - 94012 - 241-94012F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 8S for 27' boat size.
Tie Down Engineering Danforth Standard Anchor - 94011 - 241-94011F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 4S for 17' boat size.
Tie Down Engineering Danforth Standard Anchor - 94010 - 241-94010F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 2-1/2S for 10' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94022 - 241-94022F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 35H for 64' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94021 - 241-94021F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 20H for 50' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94020 - 241-94020F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 12H for 42' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94019 - 241-94019F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 5H for 31' boat size.
Tie Down Engineering Bunk Slicks - Black - 86170 - 241-86170F1
Attaches directly onto carpeted bunk boards. Fits 2" x 6" or 2" x 4" standard bunk boards. Slide on or off with less effort. Easy to install. Stainless mounting screws included.
Tie Down Engineering Bunk Slicks - Black - 86164 - 241-86164F1
Attaches directly onto carpeted bunk boards. Fits 2" x 6" or 2" x 4" standard bunk boards. Slide on or off with less effort. Easy to install. 40 Stainless mounting screws included.
Tie Down Engineering Bow Safety Chain 3/16" X 15-1/2" - 81201 - 241-81201F1
Connects the boat to the bow stand of the trailer. 3/16" x 12 links.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81250 - 241-81250F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81220 - 241-81220F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81215 - 241-81215F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81210 - 241-81210F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81200 - 241-81200F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81195 - 241-81195F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering 86588 Flare Teardrop Fender, Smooth Aluminum - 86588 - 241-86588F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86587 Teardrop Fender, Aluminum Tread - 86587 - 241-86587F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86586 Teardrop Fender, Smooth Aluminum - 86586 - 241-86586F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86585 Round Single Fender, Aluminum Tread - 86585 - 241-86585F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86584 Round Single Fender, Smooth Aluminum - 86584 - 241-86584F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86583 Jeep Single Fender, Aluminum Tread - 86583 - 241-86583F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86582 Jeep Single Fender, Smooth Aluminum - 86582 - 241-86582F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86581 Teardrop Fender, Steel - 86581 - 241-86581F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86580 Round Single Fender, Steel - 86580 - 241-86580F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86576 Floating Guide Post, White - 86576 - 241-86576F1
The Floating Guide Post features the ability to adjust the overall height from 48 - 60 in. The user can choose to notch the post at a specific height or set on floatable mode and allow the waterline to naturally and automatically adjust the overall height as it enters/exits the water. This allows the post to always remain above the waterline and function regardless of the boat ramp inclination. The metal tube is made from heavy-duty 14 gauge steel, pre-galvanized, and powder coated for a durable finish. It features a 30 degree slant through the bottom 18 in. to allow for varying hull shapes. The PVC pipe in non-marring, black or white in color and designed to hide the floating slot and holes for a clean look.
Tie Down Engineering 86568 Floating Guide Post, Black - 86568 - 241-86568F1
The Floating Guide Post features the ability to adjust the overall height from 48 - 60 in. The user can choose to notch the post at a specific height or set on floatable mode and allow the waterline to naturally and automatically adjust the overall height as it enters/exits the water. This allows the post to always remain above the waterline and function regardless of the boat ramp inclination. The metal tube is made from heavy-duty 14 gauge steel, pre-galvanized, and powder coated for a durable finish. It features a 30 degree slant through the bottom 18 in. to allow for varying hull shapes. The PVC pipe in non-marring, black or white in color and designed to hide the floating slot and holes for a clean look.
Tie Down Engineering 86566 Tail Light Bracket - 86566 - 241-86566F1
Galvanized steel for long lasting durability.
Tie Down Engineering 86563 Vertical Bunk Bracket, 5" X 10" - 86563 - 241-86563F1
Ideal for aluminum trailers, vertical bunk brackets are made of 1/4" hot dipped galvanized steel for long lasting protection.
Tie Down Engineering 86562 Vertical Bunk Bracket, 5" X 8" - 86562 - 241-86562F1
Ideal for aluminum trailers, vertical bunk brackets are made of 1/4" hot dipped galvanized steel for long lasting protection.
Tie Down Engineering 86429 Hull Sav'R Ribbed Wobble Roller, Black, 5" - 86429 - 241-86429F1
Hull SaVür ribbed wobble rollers. Constructed of colored enhanced polyvinyl chloride. Limited lifetime warranty against cutting and fading.
Tie Down Engineering 86428 Hull Sav'R Smooth Wobble Roller, Black, 4" - 86428 - 241-86428F1
Hull SaVür smooth wobble roller. Constructed of colored enhanced polyvinyl chloride. Limited lifetime warranty against cutting and fading.
Tie Down Engineering 86427 Hull Sav'R Ribbed Wobble Roller, Black, 4" - 86427 - 241-86427F1
Hull SaVür ribbed wobble rollers. Constructed of colored enhanced polyvinyl chloride. Limited lifetime warranty against cutting and fading.
Tie Down Engineering 86418 Hull Sav'R Poly Vinyl Keel Pad, Black - 86418 - 241-86418F1
Poly vinyl pads are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat.
Tie Down Engineering 86291 Hull Sav'R Poly Vinyl Keel Pad, Amber - 86291 - 241-86291F1
Poly vinyl pads are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat.
Tie Down Engineering 86277 Hull Sav'R Ribbed Wobble Roller, Amber, 4" - 86277 - 241-86277F1
Hull SaVür ribbed wobble rollers. Constructed of colored enhanced polyvinyl chloride. Limited lifetime warranty against cutting and fading.
Tie Down Engineering 86269 Aluminum Adjustable Teardrop Fender - 86269 - 241-86269F1
Heavy duty fenders made from .083" gauge diamond plate aluminum. Tandem tear drop trailer fender can be adjusted from 60" to 72". Mounting hardware not included.
Tie Down Engineering 86267 Galvanized Metal Fender - 86267 - 241-86267F1
Heavy duty stamped 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets sold separately.
Tie Down Engineering 86266 Galvanized Metal Fender - 86266 - 241-86266F1
Heavy duty stamped 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets sold separately.
Tie Down Engineering 86265 Galvanized Metal Fender - 86265 - 241-86265F1
Heavy duty stamped 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets sold separately.
Tie Down Engineering 86264 Galvanized Metal Fender - 86264 - 241-86264F1
Heavy duty stamped 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets sold separately.
Tie Down Engineering 86262 Galvanized Fender Brackets, 2/Pk - 86262 - 241-86262F1
Flush Brackets for 8" & 12" Metal Fenders.
Tie Down Engineering 86260 Galvanized Fender Brackets, 2/Pk - 86260 - 241-86260F1
Offset Brackets for 8" & 12" Metal Fenders.
Tie Down Engineering 86160 Swivel Brackets W/Bolts, Pr. - 86160 - 241-86160F1
Use with adjustable bolster brackets for proper angle of bunk or bolster boards. Hot dip galvanized for lasting protection. Packed in pairs with 1/2" x 1" bolts and 1/2" nyloc nuts.
Tie Down Engineering 86122 Galvanized Keel Roller Bracket Only, 1 Pr. - 86122 - 241-86122F1
Adjustable galvanized brackets with offsets mount on trailer tongue for keel support. Constructed of 3/16" x 1-1/2" steel with a hot dipped galvanized finish.
Tie Down Engineering 86115 Hot Dip Galvanized Swivel Bracket - 86115 - 241-86115F1
Use with adjustable bolster brackets for proper angle of bunk or bolster boards. Hot dip galvanized for lasting protection. Packed each. Bracket only, no bolts or nuts included.
Tie Down Engineering 81231 Galvanized Fender Brackets, 1 Pr. - 81231 - 241-81231F1
An attractive upgrade to any trailer, these high impact polyethylene fenders are UV protected. Designed for normal and low profile tires. Each fender requires 2 mounting brackets. Small 21"L x 7 3/4"W x 5"H. Large 45"L x 11 3/8"W x 11"H.
Tie Down Engineering 59545 36" Black Vinyl Jacketed Hitch Cables With "S" Hooks - Sold As Pair - 59545 - 241-59545F1
Black vinyl covered durable galvanized aircraft cable construction. Cables exceed SAE J684 standards for trailer coupling and automotive type hitches. 36" long cables with S-hooks containing wire keepers.
Tie Down Engineering 59541 36" Black Vinyl Jacketed Hitch Cables With "S" Hooks - Sold As Pair - 59541 - 241-59541F1
Black vinyl covered durable galvanized aircraft cable construction. Cables exceed SAE J684 standards for trailer coupling and automotive type hitches. 36" long cables with S-hooks containing wire keepers.
Tie Down Engineering 59537 36" Black Vinyl Jacketed Hitch Cables With "S" Hooks - Sold As Pair - 59537 - 241-59537F1
Black vinyl covered durable galvanized aircraft cable construction. Cables exceed SAE J684 standards for trailer coupling and automotive type hitches. 36" long cables with S-hooks containing wire keepers.
Tie Down Engineering 59533 36" Black Vinyl Jacketed Hitch Cables With "S" Hooks - Sold As Pair - 59533 - 241-59533F1
Black vinyl covered durable galvanized aircraft cable construction. Cables exceed SAE J684 standards for trailer coupling and automotive type hitches. 36" long cables with S-hooks containing wire keepers.
Tie Down Engineering 50472 Winch Strap W/Tail, 20' - 50472 - 241-50472F1
Winch strap made of 2" wide webbing with an overall rating of 5,000 lbs. End of strap has a tall. Comes with a heavy duty forged hook with safety latch.
Tie Down Engineering 48370 Wobble Roller Bushing, 1.15" - 48370 - 241-48370F1
Replacement wobble roller bushing.
Tie Down Engineering 48369 Wobble Roller Bushing, 7/8" - 48369 - 241-48369F1
Replacement wobble roller bushing.
Tie Down Engineering 44837 Tread Brite Aluminum Fender - 44837 - 241-44837F1
Heavy duty stamped fenders made from 12 gauge/.08" aluminum. Fenders can be drilled to fit a variety of mounting options.
Tie Down Engineering 44836 Tread Brite Aluminum Fender - 44836 - 241-44836F1
Heavy duty stamped fenders made from 12 gauge/.08" aluminum. Fenders can be drilled to fit a variety of mounting options.
Tie Down Engineering 44705 Tail Light Bracket - 44705 - 241-44705F1
Galvanized steel for long lasting durability.
Tie Down Engineering 44332 Plastic Fender, Large White - 44332 - 241-44332F1
An attractive upgrade to any trailer, these high impact polyethylene fenders are UV protected. Designed for normal and low profile tires. Each fender requires 2 mounting brackets.
Tie Down Engineering 44331 Plastic Fender, Large Black - 44331 - 241-44331F1
An attractive upgrade to any trailer, these high impact polyethylene fenders are UV protected. Designed for normal and low profile tires. Each fender requires 2 mounting brackets.
Tie Down Engineering 44141 Galvanized Fender Bracket - 44141 - 241-44141F1
An attractive upgrade to any trailer, these high impact polyethylene fenders are UV protected. Designed for normal and low profile tires. Each fender requires 2 mounting brackets. Small 21"L x 7 3/4"W x 5"H. Large 45"L x 11 3/8"W x 11"H.
Tie Down Engineering 44135 Galvanized Fender Bracket - 44135 - 241-44135F1
Step Bracket for 14"-15" Metal Fender.
Tie Down Engineering 44073 Vertical Bunk Bracket, Pair - 44073 - 241-44073F1
Ideal for aluminum trailers, vertical bunk brackets are made of 1/4" hot dipped galvanized steel for long lasting protection.
Tie Down Engineering 44036 Vertical Bunk Bracket, 5" X 6.62" - 44036 - 241-44036F1
Ideal for aluminum trailers, vertical bunk brackets are made of 1/4" hot dipped galvanized steel for long lasting protection.
Tie Down Engineering 36" Black Vinyl Jacketed Hitch Cables With "S" Hooks - Sold As Pair - 59548 - 241-59548F1
Replace your noisy chains with self-coiling hitch cables. Black vinyl jacketed cable with safety latch hook. Durable galvanized aircraft cable construction. Exceeds SAE J684 standards for trailer coupling and automotive type hitches. NMMA certified.
Tie Down Engineering 17033 Plastic Fender, Small Black - 17033 - 241-17033F1
An attractive upgrade to any trailer, these high impact polyethylene fenders are UV protected. Designed for normal and low profile tires. Each fender requires 2 mounting brackets.
Tie Down Engineering 17026 Plastic Fender, Small White - 17026 - 241-17026F1
An attractive upgrade to any trailer, these high impact polyethylene fenders are UV protected. Designed for normal and low profile tires. Each fender requires 2 mounting brackets.
Tie Down Engineering "S" Hook Chain Keepers - 2 Per Pack - 81255 - 241-81255F1
These patented safety chain keepers attach easily to the "S" hooks to keep your chains secured to the vehicle. Required in some states.
Split Brackets 2/Pk - 86140 - 241-86140F1
Sold in pairs (right and left) to accommodate any size roller length. Slot allows vertical adjustment for stabilizing boat on trailer. Slots accept 7/16" or 1/2" bolts. Use 1/2" or 5/8" roller shaft.
Hog Rings W/Style, Bulk 100/Box - 86258 - 241-86258F1
Hog rings w/style.
Dp Tiller Cable - 51815 - 241-51815F1
Clear vinyl coated tested to 1000 pound tensile strength. 7 x 7, 3/16" O.D., 3/32" Dia.
Danforth Standard Anchor 85S - 94018 - 241-94018F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection.
Danforth 3/8X6 Ss Chn W/Shackl - 95226 - 241-95226F1
Package 316 stainless chain with shackle.
Chain Holder - 26529 - 241-26529F1
Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H.
Carpeted Bunk Boards 5' 1Pr/Pk - 86129 - 241-86129F1
Heavy duty replacement for 2 x 4 bunk boards. Black marine grade carpet provides a smooth surface for your boat to easily slide on or off.
Carpeted Bunk Boards 4' 1Pr/Pk - 86128 - 241-86128F1
Heavy duty replacement for 2 x 4 bunk boards. Black marine grade carpet provides a smooth surface for your boat to easily slide on or off.
