Trac Outdoor
Trac T10108G3 Fisherman 25 Electric Anchor Winch - 69002 - 452-69002F1
TRAC G3 Fisherman 25 Electric Anchor Winch will power up and down your anchor with anti-reverse internal clutch to prevent free-spooling. All Anchor Winch models include: Rugged All-Steel Gears, 100' of 0.20" pre-wound braided anchor rope, Automatic resetting circuit breaker, Sealed membrane UP/DOWN switch, 14-gauge marine-grade battery wire, 17 ft long, Anchor safety cable, Assembly hardware, and instructions. Maximum Anchor Capacity: 20-25 lbs.Typical Boat Length: up to 20'Separate roller davit includedIncludes 16' of 14 gauge marine-grade battery wire2 Year Manufacturer's Warranty
Trac Sealed Thermal Circuit Breaker - 69420 - 452-69420F1
Trac Sealed Thermal Circuit Breaker.
Trac Outdoors T10219G3 Deckboat 40 Electric Anchor Winch - 69005 - 452-69005F1
AutoDeploy allows touch-and-release anchor deployment. The winch will automatically stop when the anchor touches bottom and gradually releases more rope until the anchor will hold position. At any time, press DOWN button to release more rope or press AutoDeploy again. Hold the UP button to retrieve the anchor. Includes Wireless Remote Controller with Mounting Bracket for helmONE-PIECE frame uses less deck space just 9 in. x 9 in. (23 cm x 23 cm)Integrated Anchor Roller for anchors up to 40 lbs. (18 kg)Sealed marine-grade 3-button switch on winch100' (30.5 m) x 5 mm (0.20") double braid anchor ropeMarine-grade tinned 12-gauge battery wire, 16ft (5M) includedRetrieve 100 ft. of rope in about 90 seconds!12v Electric Winch Auto-Resetting Circuit Breaker IncludedSafety Cable Included1-Year warranty
Trac Outdoors T10141 60 Amp Trolling Motor Rigging Kit - 69440 - 452-69440F1
Kit includes everything needed to wire a boat for high-current: TRAC's quick-connect system (2 quick-connect plugs - one for boat/battery and one for trolling motor or other device), 1-1/2" round hole adaptor, and a U-bracket, 30' of heavy 8-gauge AWG tin-plated marine-grade battery wire, 14" 8-gauge cross-over wires for 24V & 36V systems, 28' of corrugated wire loom, heat-shrink terminals, manual reset circuit breaker and 4 isolator bolts for installation.
Trac Outdoors T10109G3 Pontoon 35 Electric Anchor Winch - 69003 - 452-69003F1
Raise and lower your anchor with the press of a button. Retrieves 100' in about 90 seconds! ONE-PIECE frame uses less deck space just 9" x 9"Integrated Anchor Roller for anchors up to 35 lbs.Sealed marine-grade 2-button switch on winch100' (30.5 m) x 5 mm (0.20") double braid anchor rope16' Marine-grade tinned 12-gauge wireAuto-Resetting Circuit BreakerSafety Cable Included1-Year warranty
Trac Outdoors Pot Puller - 69280 - 452-69280F1
This light, powerful, recreational pot puller runs quiet on 12V power at 150 feet/min. Stores easily and features added corrosion protection for salt water use and a swivel pulley. Uses TRAC power connectors and has overload protection. Aluminum bracket, stainless steel roller & screws, nylon wheel. 10 gauge, marine grade tinned wire battery cable. The 3-position boom can be used in it's extended or shortened positions or can be folded for trailering or storage. Easily pulls 1-4 prawn traps or 1 crab trap. All steel gears assure higher durability and longer life than the competition. Fits Scotty 1023 mounts. Current: 3.4A no load, 30A max. load. 1 Year warranty.
Trac Outdoors Open Block Swivel Pulley - 69291 - 452-69291F1
This 316 stainless steel multi-functional pulley is a must have for hauling line and pulling traps. The open block design allows quick rope work. The swivel allows for multiple angles of use. Designed for use with the TRAC Line Hauler or other rigging needs.
Trac Outdoors Fishing Barometer - 69200 - 452-69200F1
Track pressure trends for greater fishing success Easy to calibrate for local barometric pressureAdjustable pressure change indicatorColor coded dial shows typical conditions for great, good or poor fishingSure-grip ABS plastic housingBraided lanyard included
Trac Outdoors 69044 G3 Anchor Winch Wireless Remote Kit - 69044 - 452-69044F1
Compact remote control allows push-button anchor winch operation from any location. The wireless remote clips into a handy storage bracket that can be mounted on your helm or anywhere you wish. You have the option of using the remote anywhere in the boat, or using it like a dash-mounted switch. Works with 69002 Fisherman and 69003 Pontoon anchor winches only. Convenient!
Trac Outdoors 69043 G3 Anchor Winch Second Switch Kit - 69043 - 452-69043F1
This switch, to be installed at the helm or wherever you choose, provides a second option for control of the electric anchor winch. The switch on the winch cover will continue to operate as well. The kit includes: Sealed switch, 24' cable with connectors and 4 screws for switch, everything needed to install an auxiliary control switch in the location of your choice. This second switch kit works with 69003 Fisherman and 69004 Pontoon anchor winches only.
Trac Heavy Duty Trolling Motor Plug, One Side Only - 69442 - 452-69442F1
Trolling motor connector plug with 8 gauge, marine grade tin-plated wire for 50 amp 12V or 24V power.
Trac Heavy Duty Trolling Motor Connector Kit - 69441 - 452-69441F1
Upgrades trolling motor connectors to high-current 12V, 24V or 36V power. Kit includes: 2 quick-connect plugs (one for boat/battery and one for trolling motor or other device), 1-1/2" round hole adaptor, U-bracket, heat shrink butt-splices and 8 gauge, marine grade tin-plated wire for 50 amp 12V, 24V or 36V power.
Trac Electric Trailer Winch 12V Vehicle Wiring Kit - 69140 - 452-69140F1
Everything you need to wire your vehicle for high-current 12V power. Use for trailer winch, portable winch and any other 12V device up to 60 amps.Includes:2 Quick-Connect plugs (one for rear of vehicle and one for trailer winch or any other 12V device)11/2" Round Hole Adaptor (for installation on flat panel - option 1)U-bracket (for installation on flat surface - option 2)25' Heavy 8-gauge AWG Tin-Plated Marine-Grade Positive (red) Battery Wire5' Heavy 8-gauge AWG Tin-Plated Marine-Grade Negative (black) Battery WireCorrosion resistant self-tapping grounding bolt to attach negative wire to vehicle frameHigh-current 60 amp Manual Resetting Circuit Breaker10 Cable ties to secure wires to vehicle Kit Includes:2 Quick-Connect plugs (one for rear of vehicle and one for trailer winch or any other 12v device)11/2" Round Hole Adaptor (for installation on flat panel - option 1)U-bracket (for installation on flat surface - option 2)25' Heavy 8-gauge AWG Tin-Plated Marine-Grade Positive (red) Battery Wire5' Heavy 8-gauge AWG Tin-Plated Marine-Grade Negative (black) Battery WireCorrosion resistant self-tapping grounding bolt to attach negative wire to vehicle frameHigh-current 60 amp Manual Resetting Circuit Breaker10 Cable ties to secure wires to vehicle
Trac 69004 Trac Angler 30 Electric Anchor Winch - 69004 - 452-69004F1
AutoDeploy allows simple touch-and-release anchor deployment. No need to hold the button while letting rope out. The winch will automatically stop when the anchor touches bottom and gradually releases more rope until the anchor will hold position. At any time, press DOWN button to release more rope or press AutoDeploy again. Hold the UP button to retrieve the anchor. Includes Wireless Remote Controller with Mounting Bracket for helmWinch plus Anchor Davit uses just 9 in. x 14 in. (23 cm x 36 cm) deck spaceSeparate Anchor davit (roller) can be positioned away, or close to winch.For anchors up to 30 lbs. (13.6 kg)Sealed marine-grade 3-button switch on winch100 ft. (30.5 m) x 5 mm (0.20") double braid anchor ropeMarine-grade tinned 12-gauge battery wire, 16ft (5M) includedRetrieve 100 ft. of rope in about 90 seconds!12v Electric Winch Auto-Resetting Circuit Breaker IncludedSafety Cable Included2-Year warranty2-Year warranty
Trac 600 Gph Bilge Pump - 69300 - 452-69300F1
Cartridge-style pump head. Pump body accepts 3/4" screw-on outlets to allow ease of installation. Use the 3/4" outlet for 800 GPH or the 1-1/8" outlet for 1100 GPH flow rates. Universal strainer base is connection-compatible with Attwood Tsunami, Rule and Johnson/Mayfair cartridge pumps. Screw mounting holes match Rule and Attwood Tsunami pump bases. Ignition protection and low power draw. Runs dry without damage. Meets ABYC, Coast Guard and ISO marine standards.
Trac 12 Volt Macerator Pump - 69390 - 452-69390F1
Designed specifically for sanitation waste and fish box evacuations, this high-powered pump incorporates a high quality motor with seamless motor tube and O-ring sealed motor end frames. High-speed rotary cuttter shreds waste efficiently, producing a higher discharge capacity. Design allows for direct replacement with other macerators for easy installation. Self priming to 5'Heavy duty armature shaft sealManual turn key with rear O-ring sealInnovative internal housing designDual blade designPremium impellerIgnition protection
Trac 12 Volt Digital Circuit Breaker - 69410 - 452-69410F1
Circuit protection in range: 10/15/20/25 ampsWiring: 10 gauge wire (or larger) User seletable circuit break-point is illuminated with high-brightness LEDUser selectable auto-resetting or manual reset modesDigital capacity measures voltage and current in real time to break the circuit at the exact user-selected settingCircuit interrupt LED to show when circuit is brokenDedicated reset buttonStackable for space optimizationCompletely sealed and waterproof3.6" L x 2.3" W
Telescoping Paddle/Boat Hook, 36"-54" - 50470 - 452-50470F1
Two-stage paddle with sturdy boat hook head. Durable anodized aluminum shaft and high impact ABS plastic blade can float. Smooth telescoping twist-lock will hold at any position. 1.25" shaft. 1 Year Warranty.
Synthetic Oars - 50422 - 452-50422F1
Lightweight and durable oar. Corrosion resistant anodized aluminum shaft with high impact, ABS plastic blade. Comfort grip. 1 Year Warranty.
Synthetic Oars - 50421 - 452-50421F1
Lightweight and durable oar. Corrosion resistant anodized aluminum shaft with high impact, ABS plastic blade. Comfort grip. 1 Year Warranty.
Synthetic Oars - 50420 - 452-50420F1
Lightweight and durable oar. Corrosion resistant anodized aluminum shaft with high impact, ABS plastic blade. Comfort grip. 1 Year Warranty.
Straight Blade Kayak Paddle, 8' - 50482 - 452-50482F1
Symmetric and spooned, the fiberglass reinforced-polypropylene blades are designed for a deep power stroke and/or whitewater use. Lightweight, black anodized aluminum shaft is adjustable to three positions for versatility and comfort. Convenient two piece design allows for quick and easy storage. 1.15" shaft diameter with drip rings. 1 Year Warranty.
Straight Blade Kayak Paddle, 7' - 50481 - 452-50481F1
Symmetric and spooned, the fiberglass reinforced-polypropylene blades are designed for a deep power stroke and/or whitewater use. Lightweight, black anodized aluminum shaft is adjustable to three positions for versatility and comfort. Convenient two piece design allows for quick and easy storage. 1.15" shaft diameter with drip rings. 1 Year Warranty.
Oar Comfort Grips - 50429 - 452-50429F1
Comfort grips fit all Crooked Creek or competitive oars to provide a slip-resistent hold.
Marine Gray Painted Oar, 5.5' - 50411 - 452-50411F1
Lightweight but built for performance. Multi-ply laminated construction for strength. Waterproof gray polyurethane finish. Epoxy blade tip for durability. Traditional 1-3/8" shaft and grips. 1 Year Warranty.
Laminated Wood Paddle - 50435 - 452-50435F1
Made of New Zealand pine wood, these lightweight paddles are built for performance. The traditional shaft and palm grip have multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability.
Laminated Wood Paddle - 50434 - 452-50434F1
Made of New Zealand pine wood, these lightweight paddles are built for performance. The traditional shaft and palm grip have multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability.
Laminated Wood Paddle - 50433 - 452-50433F1
Made of New Zealand pine wood, these lightweight paddles are built for performance. The traditional shaft and palm grip have multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability.
Laminated Wood Paddle - 50432 - 452-50432F1
Made of New Zealand pine wood, these lightweight paddles are built for performance. The traditional shaft and palm grip have multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability.
Laminated Wood Paddle - 50431 - 452-50431F1
Made of New Zealand pine wood, these lightweight paddles are built for performance. The traditional shaft and palm grip have multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability.
Laminated Wood Paddle - 50430 - 452-50430F1
Made of New Zealand pine wood, these lightweight paddles are built for performance. The traditional shaft and palm grip have multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability.
Laminated Wood Oar - 50406 - 452-50406F1
Made of New Zealand pine, these lightweight oars are built for performance. The traditional shaft has multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability. Comfort grip.
Laminated Wood Oar - 50405 - 452-50405F1
Made of New Zealand pine, these lightweight oars are built for performance. The traditional shaft has multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability. Comfort grip.
Laminated Wood Oar - 50404 - 452-50404F1
Made of New Zealand pine, these lightweight oars are built for performance. The traditional shaft has multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability. Comfort grip.
Laminated Wood Oar - 50403 - 452-50403F1
Made of New Zealand pine, these lightweight oars are built for performance. The traditional shaft has multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability. Comfort grip.
Laminated Wood Oar - 50402 - 452-50402F1
Made of New Zealand pine, these lightweight oars are built for performance. The traditional shaft has multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability. Comfort grip.
Laminated Wood Oar - 50401 - 452-50401F1
Made of New Zealand pine, these lightweight oars are built for performance. The traditional shaft has multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability. Comfort grip.
Laminated Wood Oar - 50400 - 452-50400F1
Made of New Zealand pine, these lightweight oars are built for performance. The traditional shaft has multi-ply laminated construction for strength with a waterproof polyurethane finish. Brown epoxy blade tip for durability. Comfort grip.
Isolator Bolts, 4-Pack - 69060 - 452-69060F1
Easily install your anchor winch, trolling motor and other accessories from the top of your boat deck - great when you can't reach under the deck! Protects your boat from vibrations. Marine-grade 316 stainless steel bolts are easily installed in a 1/2" hole with Phillips head screwdriver. For accessory frames up to 1-1/8" thick.
Gear Lube Pump - 69363 - 452-69363F1
Lower unit lube pump fits standard quart (32 oz.) gear lube bottles. Direct connect threaded fitting fits domestic built engines (such as Mercury, Mariner, Johnson & Evinrude). Aluminum anodized adaptor fitting fits most imported engines (such as Yamaha, but does not fit Tohatsu or Nissan).
Fluid/Oil Extractor, 7.5 Qt. - 69362 - 452-69362F1
This economical, large capacity fluid extractor provides an easier, cleaner way to drain engines with hard to reach drain plugs. Ideal for most fluid extraction (not for corrosive fluids), it includes a tethered cap, easy pour spout, a black 3/32" x 6' extraction tube and clear 11/32" x 6' drain tube. Tubes wrap around tank and are held by storage clamp.
Digital Circuit Breaker W/Display - 69402 - 452-69402F1
Circuit protection in range: 30/40/50/60 ampsWiring: 8 gauge wire (or larger) User seletable circuit break-point is illuminated with high-brightness LEDUser selectable auto-resetting or manual reset modesDigital capacity measures voltage and current in real time to break the circuit at the exact user-selected settingCircuit interrupt LED to show when circuit is brokenDedicated reset buttonStackable for space optimizationCompletely sealed and waterproof3.6" L x 2.3" W
Crooked Creek Synthetic Paddle With Hybrid Grip - 50453 - 452-50453F1
Crooked Creek's "Hybrid Grip" supports the full palm and promotes a more natural hand and wrist motion. The large 1.25" anodized aluminum tubing creates a strong backbone while the thick rubber sleeve creates an ideal 1.42" handle diameter for comfortable touring. The tube is pressed 13" into the high-impact ABS polymer blade. Blade dimensions are 7.5" wide by 18" long. 1-year warranty.
Crooked Creek Synthetic Paddle With Hybrid Grip - 50452 - 452-50452F1
Crooked Creek's "Hybrid Grip" supports the full palm and promotes a more natural hand and wrist motion. The large 1.25" anodized aluminum tubing creates a strong backbone while the thick rubber sleeve creates an ideal 1.42" handle diameter for comfortable touring. The tube is pressed 13" into the high-impact ABS polymer blade. Blade dimensions are 7.5" wide by 18" long. 1-year warranty.
Crooked Creek Synthetic Paddle With Hybrid Grip - 50451 - 452-50451F1
Crooked Creek's "Hybrid Grip" supports the full palm and promotes a more natural hand and wrist motion. The large 1.25" anodized aluminum tubing creates a strong backbone while the thick rubber sleeve creates an ideal 1.42" handle diameter for comfortable touring. The tube is pressed 13" into the high-impact ABS polymer blade. Blade dimensions are 7.5" wide by 18" long. 1-year warranty.
Crooked Creek Synthetic Paddle With Hybrid Grip - 50450 - 452-50450F1
Crooked Creek's "Hybrid Grip" supports the full palm and promotes a more natural hand and wrist motion. The large 1.25" anodized aluminum tubing creates a strong backbone while the thick rubber sleeve creates an ideal 1.42" handle diameter for comfortable touring. The tube is pressed 13" into the high-impact ABS polymer blade. Blade dimensions are 7.5" wide by 18" long. 1-year warranty.
Crooked Creek Orange Synthetic Paddle 5' - 50458 - 452-50458F1
Anodized Aluminum Shaft is fully clad in semi-soft polmer for comfort and color matched to our fiber reinforced high impact composite blade. Blade Dimensions 7.5" wide by 18" long. Shaft Diameter 1.25". 1 Year Warranty.
Crooked Creek Marine Gray Wood Oar - 50415 - 452-50415F1
Lightweight but built for performance. Multi-ply laminated construction for strength. Waterproof gray polyurethane finish. Epoxy blade tip for durability. Traditional 1-3/8" shaft and grips. 1 Year Warranty.
Crooked Creek Kayak Paddle 24" Extension - 50489 - 452-50489F1
Extension for Crooked Creek kayak paddles C11170, C11180, C11270, C11280, 50481, 50482, 40483, 50484. Lightweight anodized aluminum with cold weather gripConnect the extension between 2 paddle shafts to add 2' of lengthAllows 3 position adjustability/feathering
Crooked Creek Camoflauge Synthetic Paddle With Hybrid Grip 5' - 50454 - 452-50454F1
Anodized Aluminum Shaft with Thick Rubber Sleeve. High Impact ABS Polymer Blade. Blade Dimensions 7.5" wide by 18" long. Shaft Diameter 1.25". 1 Year Warranty.
Crooked Creek C11560 Blue 48" To 72" Telescoping Paddle Boat Hook - 50471 - 452-50471F1
Two-stage paddle with sturdy boat hook head. Durable anodized aluminum shaft and high impact ABS plastic blade can float. Smooth telescoping twist-lock will hold at any position. 1.25" shaft. 1 Year Warranty.
Crooked Creek C11150 Yellow 5' Youth Kayak Paddle - 50480 - 452-50480F1
Lightweight anodized aluminum shaft Fiberglass reinforced-polypropylene blades for durabilitySymmetrical blades1-year warranty
Crooked Creek Adjustable 3-Piece Stand Up Paddleboard Paddle 67" To 86" Includes Mesh Carry Bag - 50492 - 452-50492F1
Comes in a mesh bag Comes in a mesh bagLightweight aluminum shaftReinforced, low-flex, glass-filled polypropylene blade for durabilityHybrid grip supports the full palm
Crooked Creek 50477 Telescoping Boat Hook, 55"-144" - 50477 - 452-50477F1
Durable anodized aluminum shaft is well balanced for maximum strength but light enough to float. Smooth telescoping twist-lock will hold at any position. Non-slip safety grip for secure hold.
Crooked Creek 50476 Telescoping Boat Hook, 48"-96" - 50476 - 452-50476F1
Durable anodized aluminum shaft is well balanced for maximum strength but light enough to float. Smooth telescoping twist-lock will hold at any position. Non-slip safety grip for secure hold.
Crooked Creek 50475 Telescoping Boat Hook, 32"-72" - 50475 - 452-50475F1
Durable anodized aluminum shaft is well balanced for maximum strength but light enough to float. Smooth telescoping twist-lock will hold at any position. Non-slip safety grip for secure hold.
Camco 50428 Oar Locks, 1 Pr. - 50428 - 452-50428F1
Fastens securely to oars with adjustable bolts. Zinc-plated steel for corrosion protection. Bolts securely to oarsFits oar shafts up to 1-7/8"2" straight shaftShank Diameter: 1/2" or 5/8" with bushing
Asymmetrical Blade Kayak Paddle, 8' - 50484 - 452-50484F1
Asymmetrical and Dihedral (smooth touring), the fiberglass reinforced blades feature a built-in dock hook and are designed for a more leisurely shallow angle stroke. Lightweight, black anodized aluminum shaft. Cold weather grip with three position push-button feather settings. Convenient two piece design allows for quick and easy storage. 1.18" shaft diameter with drip rings. 1 Year Warranty.
Asymmetrical Blade Kayak Paddle, 7' - 50483 - 452-50483F1
Asymmetrical and Dihedral (smooth touring), the fiberglass reinforced blades feature a built-in dock hook and are designed for a more leisurely shallow angle stroke. Lightweight, black anodized aluminum shaft. Cold weather grip with three position push-button feather settings. Convenient two piece design allows for quick and easy storage. 1.18" shaft diameter with drip rings. 1 Year Warranty.
