Weldmount (Canada Only)
Weld Mount 008014 1:1 Plunger Only For At-300 Adhesive Dispensing Gun - At-14 - 817-008014F1
1:1 Plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10:1 plunger).
Weld Mount 008040 At-8040 No Slide Metal / Composite Bonder - At-8040 - 817-008040F1
Weld Mount AT-8040 is a solvent free, VOC Compliant, 2-part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bond usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used.
Weld Mount 02010 At-2010 6 Minute Adhesive - At-2010 - 817-02010F1
A unique 1:1 adhesive. It has high viscosity and cures in 5 - 6 minutes with a 4 minute working or open time. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 12 month shelf life when stored at 72°F or less. Packaged In a 50 ml cartridge which will bond 150 - 200 parts. Dries brown.
Weld Mount 102424100 Stainless Steel Threaded Studs, 10-24 X 1-1/2", 100/Case - St125-1024-24Ss-100 - 817-102424100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount 142012100 Stainless Steel Threaded Studs, 1/4-20 X 3/4", 100/Case - St125-1420-12Ss-100 - 817-142012100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount 142016100 Stainless Steel Threaded Studs, 1/4-20 X 1", 100/Case - St125-1420-16Ss-100 - 817-142016100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount 142020100 Stainless Steel Threaded Studs, 1/4-20 X 1-1/4", 100/Case - St125-1420-20Ss-100 - 817-142020100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount 142032100 Stainless Steel Threaded Studs, 1/4-20 X 2", 100/Case - St-125-1420-32Ss-100 - 817-142032100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount 803001 At-300 Adhesive Dispensing Gun - At-300 - 817-803001F1
The AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10:1 plunger). Replacement plungers are also available. Dries gold.
Weld Mount 803900Bk At-3 Small Nylon Wire Tie Mount, Black, 100/Pack - At-3-100B - 817-803900Bkf1
For panel and other small space applications. Molded mount is sized for a 3/16" wide wire tie with a maximum width of .20". Average pull strength is about 50 lbs. and measures .44" square. Use for runs with only a few wires or in limited space. Excellent for mounting compass wires on center console boats and for overhead panel runs.
Weld Mount 803950 At-3 Small Nylon Wire Tie Mount, White, 50/Pack - At-3-50 - 817-803950F1
For panel and other small space applications. Molded mount is sized for a 3/16" wide wire tie with a maximum width of .20". Average pull strength is about 50 lbs. and measures .44" square. Use for runs with only a few wires or in limited space. Excellent for mounting compass wires on center console boats and for overhead panel runs.
Weld Mount 803950Bk At-3 Small Nylon Wire Tie Mount, Black, 50/Pack - At-3-50B - 817-803950Bkf1
For panel and other small space applications. Molded mount is sized for a 3/16" wide wire tie with a maximum width of .20". Average pull strength is about 50 lbs. and measures .44" square. Use for runs with only a few wires or in limited space. Excellent for mounting compass wires on center console boats and for overhead panel runs.
Weld Mount 805900Bk At-5 Large Nylon Wire Tie Mount, Black, 100/Pack - At-5B-100 - 817-805900Bkf1
Set into wet resin during the hull lay up or bonded with our acrylic adhesives. Designed for a 3/8" wide wire tie and has an average pull strength of 150 lbs. Approved for submerged bilge applications. No need for plywood in the hull just to have a place to drive wire tie screws. Saves material and labor costs!
Weld Mount 805950 At-5 Large Nylon Wire Tie Mount, White, 50/Pack - At-5-50 - 817-805950F1
Set into wet resin during the hull lay up or bonded with our acrylic adhesives. Designed for a 3/8" wide wire tie and has an average pull strength of 150 lbs. Approved for submerged bilge applications. No need for plywood in the hull just to have a place to drive wire tie screws. Saves material and labor costs!
Weld Mount 805950Bk At-5 Large Nylon Wire Tie Mount, Black, 50/Pack - At-5B-50 - 817-805950Bkf1
Set into wet resin during the hull lay up or bonded with our acrylic adhesives. Designed for a 3/8" wide wire tie and has an average pull strength of 150 lbs. Approved for submerged bilge applications. No need for plywood in the hull just to have a place to drive wire tie screws. Saves material and labor costs!
Weld Mount 807100 At- 7 Aluminum Base Wire Tie Mount, 100/Case - At-7-100 - 817-807100F1
An anodized aluminum base with a nylon tie mount riveted to the base. The nylon mount swivels 360°, making alignment with the wire harness easier. Designed for a #5 wire tie and has an average pull strength of 150 Lbs.
Weld Mount 80850 Mixing Tips Only For At-8040 Bonder, 10/Pk - At-850-10 - 817-80850F1
Mixing Tips Only
Weld Mount 8085050 Mixing Tips Only For At-8040 Bonder, 50/Pk - At-850-50 - 817-8085050F1
Mixing Tips Only
Weld Mount 83212100 Stainless Steel Threaded Studs, 8-32 X 3/4", 100/Case - Ps62-832-12Ss-100 - 817-83212100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount 83224100 Stainless Steel Threaded Studs, 8-32 X 3/4", 100/Case - Ps62-832-24Ss-100 - 817-83224100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount S008013 10:1 Plunger Only For At-300 Adhesive Dispensing Gun - At-13 - 817-S008013F1
10:1 Plunger for use with AT-6030 cartridges.
Weld Mount S102412100 Stainless Steel Threaded Studs, 10-24 X 3/4", 100/Case - St125-1024-12Ss-100 - 817-S102412100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount S142024100 Stainless Steel Threaded Studs, 1/4-20 X 1-1/2", 100/Case - St125-1420-24Ss-100 - 817-S142024100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount S142040100 Stainless Steel Threaded Studs, 1/4-20 X 2-1/2", 100/Case - St-125-1420-40Ss-100 - 817-S142040100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount S805002 Dual Pusher Rod For At-2010 Adhesive - 805002 - 817-S805002F1
Dual pusher rod.
Weld Mount St125102416100 Stainless Steel Threaded Studs, 10-24 X 1", 100/Case - St125-1024-16Ss-100 - 817-St125102416100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weldmount 808100 Aluminum Wire Tie Mount, Small - At-8-100 - 817-808100F1
Use with Stainless Steel or Nylon wire ties. High tensile strength when bonded with AT-6030 adhesive. Manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping to mount hoses, conduit, etc.
Weldmount 809100 Aluminum Wire Tie Mount, Large - At-9-100 - 817-809100F1
Use with Stainless Steel or Nylon wire ties. High tensile strength when bonded with AT-6030 adhesive. Manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping to mount hoses, conduit, etc.
