Y-Harness For Dual Station Installations - 30209-001D - 622-30209001Df1

Y-Harness for Dual Station Installations. See Lenco's AutoGlide website for application information.

Wired Foot Control Kit For Troll-N-Tab Systems - 10971-001 - 622-10971001F1

Hands-free maneuvering with Lenco's variable speed digital foot control.Thrust steering allows 360° in length turningImmediate feedback for accurate boat positioningKit Includes: Standard Tactile switch kit (124SSR) to operate trim tab functions and all necessary wiring and hardware

Upper Mounting Bracket W/Gland Seal - 15085-001 - 622-15085001F1

Upper Mounting Bracket w/Gland Seal, 2008-current.

Upper Mount Bracket For Actuator - 50015-001D - 622-50015001Df1

Upper Mount Bracket For Actuator, 2007 & prior.

Trim Tab Kit-Airboat 9" X 14" - 15112-101 - 622-15112101F1

Airboat-specific trim tab design. 14" wide planing surface provides greater lift and less drag. The hydrodynamically designed side protrusions will not "dig in" during a hard turn which will result in a safer ride. The bent-up rear lip provides lateral strength across the entire trim tab blade. Blade is 12-gauge 304 stainless steel with 2" hinge height and 1/8" diameter hinge pin. The adjustable actuator mounting bracket on the blade allows for proper fit on many different transom angles. In the retracted position, the airboat tab is safely protected when running dry.Airboat Trim Tab Kits contains:1) 12-gauge 304 stainless steel trim tab plane1) #15055-001 actuator with 6' lead & Deutsch plug1)#30133-002 14' actuator extension wiring harness1) #15085-001 (116) upper mounting bracket with gland sealOwner's/installation manual & stainless steel mounting hardwareSwitch sold separately (15095001)

Switch Single Rocker For Hatch - 15096-001 - 622-15096001F1

With Deutsch Plug. For hatch lifts. With two 30" non-terminated power leads.

Single Rocker Switch For Twin Hl - 15098-001 - 622-15098001F1

With Deutsch Plug. For hatch lifts. With two 30" non-terminated power leads.

Replacement Edge Mt. Trim Tab Blade, 9" X 12" - 20158-001 - 622-20158001F1

Replacement Edge Mt. trim tab blade

Replacement Edge Mt. Trim Tab Blade, 12" X 12" - 20160-001 - 622-20160001F1

Replacement Edge Mt. trim tab blade

Mounting Screws For Blades, 44/Pk - 10030-001D - 622-10030001Df1

Mounting Screws for Blades, 44 Pack

Mounting Bracket Shim, 7 Degree - 50015-002D - 622-50015002Df1

Mounting Bracket Repl Kit-Tabs - 15099-001 - 622-15099001F1

15099001 Universal Clamshell packed Kit: contains everything needed to replace the mounts on 1 actuator on most Standard, Edge Mount, & Standard Performance trim tab kits. Includes upper mounting bracket (2007 & prior and 2008 and later) and lower mounting bracket.

Lower Mount Brkt For Actuator - 50014-001D - 622-50014001Df1

Limited Space Trim Tab Kit W/Xds Actuator - 15052-101 - 622-15052101F1

Ideal for boats with a swim platform and/or ladder. They can be fitted to transoms that have a limited mounting area. Blades are 12 gauge, 304 SS with front of blade folded to provide a smooth trailing edge and 1/8" diameter hinge pin. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.Kit includes: (2) 12-gauge stainless steel blades(2) actuators with 6' (1.8 m) lead and Deutsch connectors(2) 30133-103 20' actuator extension wiring harnesses(2) 15085-001 upper mounting brackets with gland sealLower mounting bracketsStainless steel mounting hardwareLower mounting bracketsStainless steel mounting hardware

Limited Space Ls Trim Tab Kit 12 Volt - 15088-101 - 622-15088101F1

Ideal for boats with a swim platform and/or ladder. They can be fitted to transoms that have a limited mounting area. Blades are 12 gauge, 304 SS with front of blade folded to provide a smooth trailing edge and 1/8" diameter hinge pin. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.Kit includes: (2) 12-gauge stainless steel blades w/Electro-Polish finish(2) actuators with 6' (1.8 m) lead and Deutsch connectors(2) 30133-103 20' actuator extension wiring harnesses(2) 15085-001 upper mounting brackets with gland sealLower mounting bracketsStainless steel mounting hardwareLower mounting bracketsStainless steel mounting hardware

Lenco Standard Integrated Switch Kit For Single Actuator Trim Tabs - 15169-001 - 622-15169001F1

Complete your Lenco single actuator trim tab system with the latest, maintenance-free (All-In-One) integrated tactile switch kit design. This switch technology improves accuracy and integrates the control box functionality into the key pad bezel. Simple, quick, Plug & Play installationInstant responseBuilt-in retractorLow profile designSelf-contained key pad with waterproofPlug & Play Deutsch connectorsWiring harness length 30" (76.2 cm)from the back of the switch bezel36" power pigtail2-1/16" hole cut-out size, overall key padsize of 2.75" x 2.75"4.08" clearance required from the back ofthe key pad's mounting location

Lenco Standard Actuator Replacement Hardware Kit - 10250-401D - 622-10250401Df1

Used in conjunction with Lenco 101 & 102 Standard Actuators. Includes all stainless steel hardware and Delrin pins.

Lenco Remote Gland Seal Kit - 15084-001 - 622-15084001F1

Used as an alternative method of routing the actuator wires through the transom above or below the waterline.Contents: (2) mounts,(2) gland seals(6) mounting screws

Lenco Limited Space Ls Electric Trim Tab Kit W/Standard Actuator - 15126-101 - 622-15126101F1

Great for boats from 14'-25' long with a swim platform and/or ladder. Can be fitted to transoms with limited mounting space. Blades are electro-polished 12 gauge, 304 stainless steel. Fully submersible electric actuators have plug & play Deutsch connectors. Includes: (2) 12V actuators with 6' leads, (2) 20' actuator extension, (2) trim tab blades, stainless steel mounting hardware. Switch kit sold separately. Minimum transom height - 14.5".

Lenco Led Indicator All-In-One Integrated Tactile Switch Kit For Single Actuator Systems - 15170-001 - 622-15170001F1

For 12 and 24 volt systemsSimple, quick, Plug & Play installationInstant responseBuilt-in retractorLow profile designSelf-contained key pad with waterproof Plug & Play Deutsch connectorsWiring harness length 30" (76.2 cm) from the back of the switch bezel36" power pigtail for control box2-1/16" hole cut-out size, overall key pad size of 2.75" x 2.75"4.08" clearance required from the back of the key pad's mounting location2 high-intensity LED Indicator displays show the exact position of trim tabs at all timesPhoto Eye for optimum viewing in all light conditionsBacklit key pad for optimum viewing at nightSelf-Check feature only available on the 15170001

Lenco Led Indicator All-In-One Integrated Tactile Switch Kit For Dual Actuator Systems - 15171-001 - 622-15171001F1

For 12 and 24 volt systemsSimple, quick, Plug & Play installationInstant responseBuilt-in retractorLow profile designSelf-contained key pad with waterproof Plug & Play Deutsch connectorsWiring harness length 30" (76.2 cm) from the back of the switch bezel36" power pigtail for control box2-1/16" hole cut-out size, overall key pad size of 2.75" x 2.75"4.08" clearance required from the back of the key pad's mounting location2 high-intensity LED Indicator displays show the exact position of trim tabs at all timesPhoto Eye for optimum viewing in all light conditionsBacklit key pad for optimum viewing at nightSelf-Check feature only available on the 15170001

Lenco Led (Two-Piece) Switch Kit For Single Actuator Tabs - 15270-001 - 622-15270001F1

This LED tactile switch kit has a shortened bezel for consoles which require less depth to mount. Functionality is built into the externally mounted control box and must be mounted separately. LED indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions. Simple, quick, Plug & Play installationInstant responseBuilt-in retractorLow profile designSelf-contained, sealed key pad & solid state control box with waterproof Plug & Play Deutsch connectors36" power pigtail for control box2-1/16" hole cut-out size, overall key pad size of 2.75" x 2.75"2.33" clearance required from the back of the key pad's mounting location2 high-intensity LED Indicator displays show the exact position of your trim tabs at all timesPhoto Eye for optimum viewing in all light conditionsBacklit key pad for optimum viewing at nightSelf-Check feature3 year warranty

Lenco Led (Two-Piece) Switch Kit For Dual Actuator Tabs - 15271-001 - 622-15271001F1

This LED tactile switch kit has a shortened bezel for consoles which require less depth to mount. Functionality is built into the externally mounted control box and must be mounted separately. LED indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions. Simple, quick, Plug & Play installationInstant responseBuilt-in retractorLow profile designSelf-contained, sealed key pad & solid state control box with waterproof Plug & Play Deutsch connectors72" power pigtail for control box2-1/16" hole cut-out size, overall key pad size of 2.75" x 2.75"2.33" clearance required from the back of the key pad's mounting location2 high-intensity LED Indicator displays show the exact position of your trim tabs at all timesPhoto Eye for optimum viewing in all light conditionsBacklit key pad for optimum viewing at nightSelf-Check feature3 year warranty

Lenco Flybridge Kit For Led Integrated Kits - 11841-002 - 622-11841002F1

Second station LED Key Pad connecting to the LED Indicator (All-In-One) Integrated Tactile Switch Kit (part# 15170-001 or 15171-001) Add this second station key pad to your Integrated Tactile Switch by plugging into the existing harness.Kit includes: 20' Shielded harnessSecond station key pad

Lenco Flybridge Kit For 2Pc Led Integrated Kits - 11941-002 - 622-11941002F1

Second station LED Key Pad connecting to the (2-Piece)Tactile Switch Kit (part# 15270-001 and/or 15271-001) by plugging into the Y Connector Harness.

Lenco Catalog - Catalog - 622-Catalogf1

Lenco 30267001D Autoglide, Tee Connector Only - 30267-001D - 622-30267001Df1

Compatible with Pro Control trim tab systems.

Lenco 20797021 4"L X 12"W Replacement Electro-Polished Blade Only - 20797-021 - 622-20797021F1

Replacement SS Electro-Polished Blade Only

Lenco 15208101 Deutsch Connector Kit For Pro Control Actuator Pair - 15208-101 - 622-15208101F1

Compatible with Pro Control trim tab systems.

Lenco 15207101 Wake Signal Adapter For Non-Mercury Systems - 15207-101 - 622-15207101F1

Compatible with Pro Control trim tab systems.

Lenco 15206101 3' Pro Control Actuator Power Pigtail - 15206-101 - 622-15206101F1

Compatible with Pro Control trim tab systems.

Lenco 15205101 6 Pin Detusch To Micro C Actuator Network Adapter Cable - 15205-101 - 622-15205101F1

Compatible with Pro Control trim tab systems.

Lenco 15204101 Cable Assy, Freeride Light Duty Junction 120" (Smartcraft) - 15204-101 - 622-15204101F1

Compatible with Pro Control trim tab systems.

Lenco 15203101 Cable Assy, Freeride Light Duty Junction 60" (Smartcraft) - 15203-101 - 622-15203101F1

Compatible with Pro Control trim tab systems.

Lenco 15202101 Cable Assy, Freeride Light Duty Junction 36" (Smartcraft) - 15202-101 - 622-15202101F1

Compatible with Pro Control trim tab systems.

Lenco 15201101 25' Mirco C Drop Cable - 15201-101 - 622-15201101F1

Compatible with Pro Control trim tab systems.

Lenco 15200101 15' Mirco C Drop Cable - 15200-101 - 622-15200101F1

Compatible with Pro Control trim tab systems.

Lenco 15199101 6' Mirco C Drop Cable - 15199-101 - 622-15199101F1

Compatible with Pro Control trim tab systems.

Lenco 15198101 2' Mirco C Drop Cable - 15198-101 - 622-15198101F1

Compatible with Pro Control trim tab systems.

Lenco 15197101 Micro C Power Cable With Fuse And Ground - 15197-101 - 622-15197101F1

Compatible with Pro Control trim tab systems.

Lenco 15196101 N2K Resistor Kit (M/F) - 15196-101 - 622-15196101F1

Compatible with Pro Control trim tab systems.

Lenco 15195101 Actuator Hardware Kit (Nut And Bolts Only) Pro Control - 15195-101 - 622-15195101F1

Compatible with Pro Control trim tab systems.

Lenco 15194101 Bottom Mounting Bracket Pro Control - 15194-101 - 622-15194101F1

Compatible with Pro Control trim tab systems.

Lenco 15193101 Top Mounting Bracket Pro Control - 15193-101 - 622-15193101F1

Compatible with Pro Control trim tab systems.

Lenco 15192101 Top And Bottom Mounting Bracket Kit With Hardware Pro Control - 15192-101 - 622-15192101F1

Compatible with Pro Control trim tab systems.

Lenco 15191101 Remote Gland Seal Kit Pro Control - 15191-101 - 622-15191101F1

Compatible with Pro Control trim tab systems.

Lenco 15190001 Sd Pro Actuator, 4.25" Stroke 12" Pin To Pin - 15190-001 - 622-15190001F1

The cutting-edge actuator empowers boaters to create precise, repeatable wake. Best-in-class connectivity and total customization deliver an unbeatable user experience. Fast, precise, repeatasble wakes enabled through inductive sensors - within 1% accuracySeamless integration into surf systems, with CAN-based hardware enabling smart actuations via NMEA communication protocolMFD Integration availableSimple installation and intuitive commissioningExpanded Mercury integration, connecting directly with SmartCraft, providing improved and superior control logicFault and diagnostic capability with overload protection

Lenco 15189001 Sd Pro Actuator, 2.25" Stroke 11.5" Pin To Pin - 15189-001 - 622-15189001F1

The cutting-edge actuator empowers boaters to create precise, repeatable wake. Best-in-class connectivity and total customization deliver an unbeatable user experience. Fast, precise, repeatasble wakes enabled through inductive sensors - within 1% accuracySeamless integration into surf systems, with CAN-based hardware enabling smart actuations via NMEA communication protocolMFD Integration availableSimple installation and intuitive commissioningExpanded Mercury integration, connecting directly with SmartCraft, providing improved and superior control logicFault and diagnostic capability with overload protection

Lenco 15188001 Sd Pro Actuator, 2.25" Stroke 10.5" Pin To Pin - 15188-001 - 622-15188001F1

The cutting-edge actuator empowers boaters to create precise, repeatable wake. Best-in-class connectivity and total customization deliver an unbeatable user experience. Fast, precise, repeatasble wakes enabled through inductive sensors - within 1% accuracySeamless integration into surf systems, with CAN-based hardware enabling smart actuations via NMEA communication protocolMFD Integration availableSimple installation and intuitive commissioningExpanded Mercury integration, connecting directly with SmartCraft, providing improved and superior control logicFault and diagnostic capability with overload protection

Lenco 15187001 Sd Pro Actuator, 2.25" Stroke 10" Pin To Pin - 15187-001 - 622-15187001F1

The cutting-edge actuator empowers boaters to create precise, repeatable wake. Best-in-class connectivity and total customization deliver an unbeatable user experience. Fast, precise, repeatasble wakes enabled through inductive sensors - within 1% accuracySeamless integration into surf systems, with CAN-based hardware enabling smart actuations via NMEA communication protocolMFD Integration availableSimple installation and intuitive commissioningExpanded Mercury integration, connecting directly with SmartCraft, providing improved and superior control logicFault and diagnostic capability with overload protection

Lenco 15186107 Pro Control Auto 12V Trim Tab System, 12" X 12" Edge Mount Trim Tab Kit, Complete - 15186-107 - 622-15186107F1

Pro Control Auto delivers industry-leading auto-levelling for unprecedented precision, control, and comfort on the water. Standard Mount Trim Tabs-The original Trim Tab design, ideal for center console fishing boats to cuddy cabin cruisers. Edge Mount Trim Tabs-Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style. ^Kits include:(1) Pro Control Auto Keypad (15174-107)(1) Pro Control Auto IMU (15180-001)(2) 12-gauge 304 (2.7 mm) stainless steel standard finish blades: - Standard blades - with a 5/8" (1.6 cm) flared trailing edge. OR - Edge Mount blades - with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge) & 1/8" (3.2 mm) diameter hinge pin.(2) 2.25" Stroke SD Pro Actuators, 10" pin to pin (15187-001)(6) Micro C Tee Connector (30267-001)Micro C Power Cable with fuse and ground (30281-001)(2) 6' Micro C Drop cables (30269-002), (1) 15' (30269-001) and (1) 25' (30269-004) Micro C Drop cables(2) 6 Pin Detusch to Micro C Actuator Network Adapter Cable (30377-001)(2) 3' (.91 m) Pro Control Actuator Power Pigtail (30378-001)

Lenco 15185106 Pro Control Assist 12V Trim Tab System, 12" X 12" Edge Mount Trim Tab Kit, Complete - 15185-106 - 622-15185106F1

Pro Control Assist is the manual control option which features a smart, sleek dial controller, providing a best-in-class user interface. Standard Mount Trim Tabs©The original Trim Tab designEdge Mount Trim Tabs©Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a 3"" (7.6 cm) lower mounting height on 12"" (30.5 cm) long blades. All edges are turned up for added strength and style."

Lenco 15184107 Pro Control Auto 12V Trim Tab System, 12" X 12" Standard Trim Tab Kit, Complete - 15184-107 - 622-15184107F1

Pro Control Auto delivers industry-leading auto-levelling for unprecedented precision, control, and comfort on the water. Standard Mount Trim Tabs-The original Trim Tab design, ideal for center console fishing boats to cuddy cabin cruisers. Edge Mount Trim Tabs-Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style. ^Kits include:(1) Pro Control Auto Keypad (15174-107)(1) Pro Control Auto IMU (15180-001)(2) 12-gauge 304 (2.7 mm) stainless steel standard finish blades: - Standard blades - with a 5/8" (1.6 cm) flared trailing edge. OR - Edge Mount blades - with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge) & 1/8" (3.2 mm) diameter hinge pin.(2) 2.25" Stroke SD Pro Actuators, 10" pin to pin (15187-001)(6) Micro C Tee Connector (30267-001)Micro C Power Cable with fuse and ground (30281-001)(2) 6' Micro C Drop cables (30269-002), (1) 15' (30269-001) and (1) 25' (30269-004) Micro C Drop cables(2) 6 Pin Detusch to Micro C Actuator Network Adapter Cable (30377-001)(2) 3' (.91 m) Pro Control Actuator Power Pigtail (30378-001)

Lenco 15183106 Pro Control Assist 12V Trim Tab System, 12" X 12" Standard Trim Tab Kit, Complete - 15183-106 - 622-15183106F1

Pro Control Assist is the manual control option which features a smart, sleek dial controller, providing a best-in-class user interface. Standard Mount Trim Tabs©The original Trim Tab design

Lenco 15182107 Pro Control Auto 12V Trim Tab System, 9" X 12" Standard Trim Tab Kit, Complete - 15182-107 - 622-15182107F1

Pro Control Auto delivers industry-leading auto-levelling for unprecedented precision, control, and comfort on the water. Standard Mount Trim Tabs-The original Trim Tab design, ideal for center console fishing boats to cuddy cabin cruisers. Edge Mount Trim Tabs-Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style. ^Kits include:(1) Pro Control Auto Keypad (15174-107)(1) Pro Control Auto IMU (15180-001)(2) 12-gauge 304 (2.7 mm) stainless steel standard finish blades: - Standard blades - with a 5/8" (1.6 cm) flared trailing edge. OR - Edge Mount blades - with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge) & 1/8" (3.2 mm) diameter hinge pin.(2) 2.25" Stroke SD Pro Actuators, 10" pin to pin (15187-001)(6) Micro C Tee Connector (30267-001)Micro C Power Cable with fuse and ground (30281-001)(2) 6' Micro C Drop cables (30269-002), (1) 15' (30269-001) and (1) 25' (30269-004) Micro C Drop cables(2) 6 Pin Detusch to Micro C Actuator Network Adapter Cable (30377-001)(2) 3' (.91 m) Pro Control Actuator Power Pigtail (30378-001)

Lenco 15181106 Pro Control Assist 12V Trim Tab System, 9" X 12" Standard Trim Tab Kit, Complete - 15181-106 - 622-15181106F1

Pro Control Assist is the manual control option which features a smart, sleek dial controller, providing a best-in-class user interface. Standard Mount Trim Tabs©The original Trim Tab designEdge Mount Trim Tabs©Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a 3"" (7.6 cm) lower mounting height on 12"" (30.5 cm) long blades. All edges are turned up for added strength and style."Micro C Power Cable with fuse and ground (30281-001)(2) 6' Micro C Drop cables (30269-002), (1) 25' (30269-004) Micro C Drop cables(2) 6 Pin Detusch to Micro C Actuator Network Adapter Cable (30377-001)(2) 3' (.91 m) Pro Control Actuator Power Pigtail (30378-001)(2) Wake Signal Adapter for Non-Mercury Systems (30376-001)

Lenco 15180001 Pro Control Auto Replacment Imu - 15180-001 - 622-15180001F1

Compatible with Pro Control trim tab systems.

Lenco 15179106 Pro Control Assist Replaement Flybrdige Keypad - 15179-106 - 622-15179106F1

Pro Control Assist Keypad with programmable memory position recall capabilities provides intuitive, precision controls for your trim tab system. CAN communication protocol comes as standard, making integration and installation simple. Day and Night ModeKeypad dimensions 2.75" x 4.37"2 1/16" hole cut out sizeHelm Control Kit Includes: (1) Pro Control Assist Keypad (15175-106), (2) Micro C Drop Cables, 6' (1.82 m) (30269-002), (1) Wake Signal Adapter for Non-Mercury Systems (30376-001), (2) Micro C Tee Connector (30267-001)Flybridge Control Kit Includes: (1) Pro Control Assist Keypad (15175-107), (1) Micro C Drop Cable: 6' (1.82 m) (30269-001), (1) Micro C Tee Connector (30267-001)

Lenco 15178107 Pro Control Auto Replacement Flybridge Keypad Kit - 15178-107 - 622-15178107F1

Pro Control Auto keypad with auto-levelling capabilities provides intuitive, precision controls for your trim tab system. CAN communication protocol comes as standard, making integration and installation simple. Day and Night ModeKeypad dimensions 2.75" x 4.37"2 1/16" hole cut out sizeHelm Control/IMU Kit Includes: (1) Pro Control Auto Keypad (15174-107), (1) Pro Control Auto IMU (15180-001), (3) Micro C Drop Cables: (2) 6' (1.82 m) (30269-002), (1) 15' (4.57 m) (30269-001), (1) Wake Signal Adapter for Non-Mercury systems (30376-001), (3) Micro C Tee Connectors (30267-001)Flybridge Control Kit Includes: (1) Pro Control Auto Keypad (15174-107), (1) Micro C Drop Cable: 6' (1.82 m) (30269-001), (1) Micro C Tee Connector (30267-001)

Lenco 15177106 Pro Control Assist Flybrdige Keypad Kit - 15177-106 - 622-15177106F1

Pro Control Assist Keypad with programmable memory position recall capabilities provides intuitive, precision controls for your trim tab system. CAN communication protocol comes as standard, making integration and installation simple. Day and Night ModeKeypad dimensions 2.75" x 4.37"2 1/16" hole cut out sizeHelm Control Kit Includes: (1) Pro Control Assist Keypad (15175-106), (2) Micro C Drop Cables, 6' (1.82 m) (30269-002), (1) Wake Signal Adapter for Non-Mercury Systems (30376-001), (2) Micro C Tee Connector (30267-001)Flybridge Control Kit Includes: (1) Pro Control Assist Keypad (15175-107), (1) Micro C Drop Cable: 6' (1.82 m) (30269-001), (1) Micro C Tee Connector (30267-001)

Lenco 15176107 Pro Control Auto Flybridge Keypad Kit - 15176-107 - 622-15176107F1

Pro Control Auto keypad with auto-levelling capabilities provides intuitive, precision controls for your trim tab system. CAN communication protocol comes as standard, making integration and installation simple. Day and Night ModeKeypad dimensions 2.75" x 4.37"2 1/16" hole cut out sizeHelm Control/IMU Kit Includes: (1) Pro Control Auto Keypad (15174-107), (1) Pro Control Auto IMU (15180-001), (3) Micro C Drop Cables: (2) 6' (1.82 m) (30269-002), (1) 15' (4.57 m) (30269-001), (1) Wake Signal Adapter for Non-Mercury systems (30376-001), (3) Micro C Tee Connectors (30267-001)Flybridge Control Kit Includes: (1) Pro Control Auto Keypad (15174-107), (1) Micro C Drop Cable: 6' (1.82 m) (30269-001), (1) Micro C Tee Connector (30267-001)

Lenco 15175106 Pro Control Assist Replaement Keypad - 15175-106 - 622-15175106F1

Pro Control Assist Keypad with programmable memory position recall capabilities provides intuitive, precision controls for your trim tab system. CAN communication protocol comes as standard, making integration and installation simple. Day and Night ModeKeypad dimensions 2.75" x 4.37"2 1/16" hole cut out sizeHelm Control Kit Includes: (1) Pro Control Assist Keypad (15175-106), (2) Micro C Drop Cables, 6' (1.82 m) (30269-002), (1) Wake Signal Adapter for Non-Mercury Systems (30376-001), (2) Micro C Tee Connector (30267-001)Flybridge Control Kit Includes: (1) Pro Control Assist Keypad (15175-107), (1) Micro C Drop Cable: 6' (1.82 m) (30269-001), (1) Micro C Tee Connector (30267-001)

Lenco 15174107 Pro Control Auto Replacement Keypad Kit - 15174-107 - 622-15174107F1

Pro Control Auto keypad with auto-levelling capabilities provides intuitive, precision controls for your trim tab system. CAN communication protocol comes as standard, making integration and installation simple. Day and Night ModeKeypad dimensions 2.75" x 4.37"2 1/16" hole cut out sizeHelm Control/IMU Kit Includes: (1) Pro Control Auto Keypad (15174-107), (1) Pro Control Auto IMU (15180-001), (3) Micro C Drop Cables: (2) 6' (1.82 m) (30269-002), (1) 15' (4.57 m) (30269-001), (1) Wake Signal Adapter for Non-Mercury systems (30376-001), (3) Micro C Tee Connectors (30267-001)Flybridge Control Kit Includes: (1) Pro Control Auto Keypad (15174-107), (1) Micro C Drop Cable: 6' (1.82 m) (30269-001), (1) Micro C Tee Connector (30267-001)

Lenco 15173106 Pro Control Assist Controller Kit - 15173-106 - 622-15173106F1

Pro Control Assist Keypad with programmable memory position recall capabilities provides intuitive, precision controls for your trim tab system. CAN communication protocol comes as standard, making integration and installation simple. Day and Night ModeKeypad dimensions 2.75" x 4.37"2 1/16" hole cut out sizeHelm Control Kit Includes: (1) Pro Control Assist Keypad (15175-106), (2) Micro C Drop Cables, 6' (1.82 m) (30269-002), (1) Wake Signal Adapter for Non-Mercury Systems (30376-001), (2) Micro C Tee Connector (30267-001)Flybridge Control Kit Includes: (1) Pro Control Assist Keypad (15175-107), (1) Micro C Drop Cable: 6' (1.82 m) (30269-001), (1) Micro C Tee Connector (30267-001)

Lenco 15172107 Pro Control Auto Controller Kit - 15172-107 - 622-15172107F1

Pro Control Auto keypad with auto-levelling capabilities provides intuitive, precision controls for your trim tab system. CAN communication protocol comes as standard, making integration and installation simple. Day and Night ModeKeypad dimensions 2.75" x 4.37"2 1/16" hole cut out sizeHelm Control/IMU Kit Includes: (1) Pro Control Auto Keypad (15174-107), (1) Pro Control Auto IMU (15180-001), (3) Micro C Drop Cables: (2) 6' (1.82 m) (30269-002), (1) 15' (4.57 m) (30269-001), (1) Wake Signal Adapter for Non-Mercury systems (30376-001), (3) Micro C Tee Connectors (30267-001)Flybridge Control Kit Includes: (1) Pro Control Auto Keypad (15174-107), (1) Micro C Drop Cable: 6' (1.82 m) (30269-001), (1) Micro C Tee Connector (30267-001)

Lenco 120 Lower Mounting Bracket Kit - 15140-001 - 622-15140001F1

Used in conjunction with new XD and XDS Actuator applications. Includes all stainless steel hardware.

High Performance Electric Trim Tab Kit 12V, 25" X 14" Dual Actuator - 15051-101 - 622-15051101F1

Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5".Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardwareActuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32'Switch Kits sold separately

High Performance Electric Trim Tab Kit 12V, 21" X 14" Dual Actuator - 15050-101 - 622-15050101F1

Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5". Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardware Actuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32' Switch Kits sold separately

High Performance Electric Trim Tab Kit 12V, 18" X 12" Single Actuator - 15049-101 - 622-15049101F1

Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5".Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardwareActuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32'Switch Kits sold separately

High Performance Electric Trim Tab Kit 12V, 14" X 12" Single Actuator - 15048-101 - 622-15048101F1

Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5".Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardwareActuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32'Switch Kits sold separately

Hatch Lift Slide Bracket-Ss - 70381-001 - 622-70381001F1

In case of power failure, this bracket allows you to pull the hatch open 5" in order to remove pull pin for access.

Electric Hatch Lift - 20788-001 - 622-20788001F1

Comes with 2' leads and Deutsch plugsSince the hatch lift is based around a ball-screw it is able to push and remain at a constant position. Easy to install because they install with a single power cable and draw an average of five amps of power. In case of power failure they are supplied with two clevis pins a t the mounting brackets. Switch sold separately. LOA is measured from top bracket to bottom bracket in the mounted position.

Electric Hatch Lift - 20782-001 - 622-20782001F1

Comes with 2' leads and Deutsch plugsSince the hatch lift is based around a ball-screw it is able to push and remain at a constant position. Easy to install because they install with a single power cable and draw an average of five amps of power. In case of power failure they are supplied with two clevis pins a t the mounting brackets. Switch sold separately. LOA is measured from top bracket to bottom bracket in the mounted position.

Electric Hatch Lift - 20778-001 - 622-20778001F1

Comes with 2' leads and Deutsch plugsSince the hatch lift is based around a ball-screw it is able to push and remain at a constant position. Easy to install because they install with a single power cable and draw an average of five amps of power. In case of power failure they are supplied with two clevis pins a t the mounting brackets. Switch sold separately. LOA is measured from top bracket to bottom bracket in the mounted position.

Electric Hatch Lift - 20776-001 - 622-20776001F1

Comes with 2' leads and Deutsch plugsSince the hatch lift is based around a ball-screw it is able to push and remain at a constant position. Easy to install because they install with a single power cable and draw an average of five amps of power. In case of power failure they are supplied with two clevis pins a t the mounting brackets. Switch sold separately.LOA is measured from top bracket to bottom bracket in the mounted position.

Electric Hatch Lift - 20774-001 - 622-20774001F1

Comes with 2' leads and Deutsch plugsSince the hatch lift is based around a ball-screw it is able to push and remain at a constant position. Easy to install because they install with a single power cable and draw an average of five amps of power. In case of power failure they are supplied with two clevis pins a t the mounting brackets. Switch sold separately. LOA is measured from top bracket to bottom bracket in the mounted position.

Electric Hatch Lift - 20770-001 - 622-20770001F1

Comes with 2' leads and Deutsch plugsSince the hatch lift is based around a ball-screw it is able to push and remain at a constant position. Easy to install because they install with a single power cable and draw an average of five amps of power. In case of power failure they are supplied with two clevis pins a t the mounting brackets. Switch sold separately.LOA is measured from top bracket to bottom bracket in the mounted position.

Electric Hatch Lift - 20768-001 - 622-20768001F1

Comes with 2' leads and Deutsch plugsSince the hatch lift is based around a ball-screw it is able to push and remain at a constant position. Easy to install because they install with a single power cable and draw an average of five amps of power. In case of power failure they are supplied with two clevis pins a t the mounting brackets. Switch sold separately. LOA is measured from top bracket to bottom bracket in the mounted position.

Electric Hatch Lift - 20764-001 - 622-20764001F1

Comes with 2' leads and Deutsch plugsSince the hatch lift is based around a ball-screw it is able to push and remain at a constant position. Easy to install because they install with a single power cable and draw an average of five amps of power. In case of power failure they are supplied with two clevis pins a t the mounting brackets. Switch sold separately. LOA is measured from top bracket to bottom bracket in the mounted position.

Double Rocker Switch Panel For Single Actuator Trim Tabs - 10222-211D - 622-10222211Df1

Economically priced double rocker switch with Deutsch connections 36" power pigtail and mounting hardware includedHole cut-out 2-1/4", overall size 2-3/4" x 2-3/4"36" Power pigtail

Double Rocker Switch Panel For Dual-Actuator Trim Tabs - 10221-211D - 622-10221211Df1

Economically priced double rocker switch with Deutsch connections36" power pigtail and mounting hardware includedHole cut-out 2-1/4", overall size 2-3/4" x 2-3/4"36" Power pigtail

Deutsch Receptacle Kit 5/Pk - 15107-002 - 622-15107002F1

Used on Lenco actuators and extension harnesses.Comes in a package of 5.

Deutsch Plug Kit 5/Pk - 15107-001 - 622-15107001F1

Used on Lenco actuators and extension harnesses.Comes in a package of 5.

Delrin Mounting Pin For Actuator (2Ea) - 15087-001 - 622-15087001F1

Bennett To Lenco Retrofit Kit, 12V - 15064-001 - 622-15064001F1

Electric RetroFit Kit for Bennett Trim Tabs. Will retrofit any boat equipped with standard length Bennett 4-ring version hydraulic cylinders. Kit includes everything necessary to eliminate the hydraulic pump and and upgrade your boat to Lenco's electric system. Includes jumper wires to connect to current Bennett rocker switch. Complete installation instructions are included.

Autoglide Extension Cable, 30' - 30260-004 - 622-30260004F1

9" X 9" Trim Tab Kit W/O Switch - 15000-101 - 622-15000101F1

Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14".Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardware Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsStainless steel mounting hardwareSwitch kits sold separately

9" X 18" Trim Tab Kit W/O Switch - 15002-101 - 622-15002101F1

Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14".Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardware Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsStainless steel mounting hardwareSwitch kits sold separately

9" X 12" Trim Tab Kit W/Standard Tactile Switch - 15104-102 - 622-15104102F1

Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14". Kit Includes: Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardwareSwitch KitSwitch Kit

9" X 12" Trim Tab Kit W/O Switch - 15001-101 - 622-15001101F1

Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14".Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardware Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsStainless steel mounting hardwareSwitch kits sold separately

9" X 12" Trim Tab Kit W/Led Indicator Switch - 15108-103 - 622-15108103F1

Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14". Kit Includes: Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardwareSwitch KitSwitch Kit

9" X 12" Std Tab Kit W/Double Rocker Switch - 15101-104 - 622-15101104F1

Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14". Kit Includes: Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardwareSwitch KitSwitch Kit

9" X 12" Replacement Standard Blade Only - 20141-001 - 622-20141001F1

9 x 12 Replacement Standard Blade Only

9" X 12" Edge Mount Electric Trim Tab Kit W/O Switch - 15014-101 - 622-15014101F1

Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are 304 stainless steel with 1" turned up edges and an 85° inside taper. Edge mount tabs are space savers. The actuators mount at the trailing edge of the blades, requiring less transom height than the standard mount tabs. Min transom height: 9" long models - 13.5". Kit Includes: 12-volt actuators (2) with 6' leads and Deutsch connectors20' actuator extension harnesses (2) with Deutsch connectorsStainless Steel trim tab blades, 12 gauge (2)Stainless Steel mounting hardware Switch kit sold separatelyStainless steel mounting hardwareSwitch kit sold separately

7' Actuator Extension Cable - 30133-001D - 622-30133001Df1

Deutsch connectors. Completely waterproof, quick and easy installation. ABYC compliant. One required per actuator, sold separately.

32Ft Actuator Extension Cable - 30142-202 - 622-30142202F1

26Ft Actuator Extension Cable - 30142-201 - 622-30142201F1

24V Replacement Actuator - 101 Standard Series - 15061-001 - 622-15061001F1

24V actuator for Trim Tabs as well as ski boats and tow boats. Includes Deutsch connector and 6' cable. Mounting brackets sold separately. 101 Standard Series: For Standard trim tab, Edge Mount trim tab, Standard Performance tab and 2008 & prior Air Boat kit

20' Shielded Flybridge Indicator Switch Kit - 11841-102 - 622-11841102F1

Second station LED Key Pad connecting to the NEW (ALL-IN-ONE) Integrated Tactile Switch Kit (part# 15169-001). Add this second station key pad to your Integrated Tactile Switch by plugging into the existing harness.Kit includes: 20' Shielded harnessSecond station key pad

20' Actuator Extension Cable - 30133-103D - 622-30133103Df1

Deutsch connectors. Completely waterproof, quick and easy installation. ABYC compliant. One required per actuator, sold separately.

18" X 14" Standard Performance Electric Trim Tab Kit W/O Switch - 15040-101 - 622-15040101F1

Fully submersible, precise-control electric actuators. All Plug & Play Deutsch connections, Blades are constructed of 12-gauge Electro-Polished 304 stainless steel with 1" turned up edges (the 16x12 and 18x14 blades have an 85° inside taper) and come with 1/4" diameter stainless steel hinge pins and stainless steel mounting screws. Min. transom height: 9"L models - 13.5", 12" and longer models - 11".Kit Includes:12-volt Standard actuators (2) with 5/16" Stainless Steel mounting bolts6' leads and Deutsch connectors20' actuator extension harnesses (2) with Deutsch connectorsStainless Steel electro-polished trim tab blades-12 gauge (2)Stainless Steel mounting hardwareSwitch kits sold separately Kit Includes:12-volt Standard actuators (2) with 5/16" Stainless Steel mounting bolts20' actuator extension harnesses (2) with Deutsch connectors6' leads and Deutsch connectorsStainless Steel electro-polished trim tab blades-12 gauge (2)Stainless Steel mounting hardwareSwitch kits sold separately

16" X 30" Super Strong Series Electric Trim Tab Kit 12 Volt - 15023-101 - 622-15023101F1

Designed for sportfishing boats, high speed cruising boats and large commercial vessels. 7-gauge, lasercut 304 stainless steel blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin, and a 3.75" sacrificial anode. Kit includes:Extreme Duty 12V actuators (2) with 316 Stainless Steel billet ram with 3/8" stainless steel bolts, 6' leads and Deutsch connectors7-gauge Stainless Steel trim tab blades (2)Stainless Steel mounting hardwareActuator extension harnesses and switch kits sold separately

16" X 12" Standard Performance Electric Trim Tab Kit W/O Switch - 15039-101 - 622-15039101F1

Fully submersible, precise-control electric actuators. All Plug & Play Deutsch connections, Blades are constructed of 12-gauge Electro-Polished 304 stainless steel with 1" turned up edges (the 16x12 and 18x14 blades have an 85° inside taper) and come with 1/4" diameter stainless steel hinge pins and stainless steel mounting screws. Min. transom height: 9"L models - 13.5", 12" and longer models - 11".Kit Includes:12-volt Standard actuators (2) with 5/16" Stainless Steel mounting bolts6' leads and Deutsch connectors20' actuator extension harnesses (2) with Deutsch connectorsStainless Steel electro-polished trim tab blades-12 gauge (2)Stainless Steel mounting hardwareSwitch kits sold separately Kit Includes:12-volt Standard actuators (2) with 5/16" Stainless Steel mounting bolts20' actuator extension harnesses (2) with Deutsch connectors6' leads and Deutsch connectorsStainless Steel electro-polished trim tab blades-12 gauge (2)Stainless Steel mounting hardwareSwitch kits sold separately

14" X 12" Standard Performance Electric Trim Tab Kit W/O Switch - 15038-101 - 622-15038101F1

Fully submersible, precise-control electric actuators. All Plug & Play Deutsch connections, Blades are constructed of 12-gauge Electro-Polished 304 stainless steel with 1" turned up edges (the 16x12 and 18x14 blades have an 85° inside taper) and come with 1/4" diameter stainless steel hinge pins and stainless steel mounting screws. Min. transom height: 9"L models - 13.5", 12" and longer models - 11".Kit Includes:12-volt Standard actuators (2) with 5/16" Stainless Steel mounting bolts6' leads and Deutsch connectors20' actuator extension harnesses (2) with Deutsch connectorsStainless Steel electro-polished trim tab blades-12 gauge (2)Stainless Steel mounting hardwareSwitch kits sold separately Kit Includes:12-volt Standard actuators (2) with 5/16" Stainless Steel mounting bolts20' actuator extension harnesses (2) with Deutsch connectors6' leads and Deutsch connectorsStainless Steel electro-polished trim tab blades-12 gauge (2)Stainless Steel mounting hardwareSwitch kits sold separately

14' Actuator Extension Cable - 30133-002D - 622-30133002Df1

Deutsch connectors. Completely waterproof, quick and easy installation. ABYC compliant. One required per actuator, sold separately.

12V Replacement Actuator - 102 Xd Series - 15060-001 - 622-15060001F1

12V actuator for Trim Tabs as well as ski boats and tow boats. Includes Deutsch connector and 6' cable. Mounting brackets sold separately. 102 HD Series: Standard actuator for Trolling Tab systems sold from 2000 to present

12V Replacement Actuator - 102 Standard Series - 15059-001 - 622-15059001F1

12V actuator for Trim Tabs as well as ski boats and tow boats. Includes Deutsch connector and 6' cable. Mounting brackets sold separately. 102 HD Series: Standard actuator for Trolling Tab systems sold from 2000 to present

12V Replacement Actuator - 102 Fast - 15129-001 - 622-15129001F1

12V actuator for Trim Tabs as well as ski boats and tow boats. Includes Deutsch connector and 6' cable. Mounting brackets sold separately. 102F FAST Series: 4-1/4" stroke fast actuator - 12V - 5/16"

12V Replacement Actuator - 101 Xds Series - 15057-001 - 622-15057001F1

12V actuator for Trim Tabs as well as ski boats and tow boats. Includes Deutsch connector and 6' cable. Mounting brackets sold separately. 101 XDS Series: Extreme Duty "short" series. For LS trim Tabs, 2009+ Airboat tabs, and OEM specific kits and limited space applications, it is the shortest actuator we manufacture.